X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fsata_sx4.c;h=9f9f7b30654a3b5ff05b0dd1ad35140167a00689;hb=3cc3eb1148e4b2dfabf7a1dcf36fd8be1331ca95;hp=d5cbd16629ad2d117d675324fb991875586444fd;hpb=6d32d30f55020d766388df7515f771f68c973033;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index d5cbd16629a..9f9f7b30654 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -254,7 +254,6 @@ static struct scsi_host_template pdc_sata_sht = {
 };
 
 static const struct ata_port_operations pdc_20621_ops = {
-	.port_disable		= ata_port_disable,
 	.tf_load		= pdc_tf_load_mmio,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
@@ -1382,9 +1381,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 	const struct ata_port_info *ppi[] =
 		{ &pdc_port_info[ent->driver_data], NULL };
 	struct ata_host *host;
-	void __iomem *base;
 	struct pdc_host_priv *hpriv;
-	int rc;
+	int i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -1410,11 +1408,17 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-	pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200);
-	pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280);
-	pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300);
-	pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380);
+	for (i = 0; i < 4; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+		unsigned int offset = 0x200 + i * 0x80;
+
+		pdc_sata_setup_port(&ap->ioaddr, base + offset);
+
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm");
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port");
+	}
 
 	/* configure and activate */
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);