X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fsata_vsc.c;h=0d9be168487326504ba799b38bab2091c1ed4ab2;hb=fd995f7039f1955ccc6b43e1e2d168060b31e4b2;hp=1b5d81faa10248c740694adcdc4e62c83c1363dd;hpb=99e1221d1a1edac316f7f8116c781f75733b1159;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 1b5d81faa10..0d9be168487 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 enum {
 	VSC_MMIO_BAR			= 0,
@@ -98,20 +98,21 @@ enum {
 			      VSC_SATA_INT_PHY_CHANGE),
 };
 
-static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
+static int vsc_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
 {
 	if (sc_reg > SCR_CONTROL)
-		return 0xffffffffU;
-	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+		return -EINVAL;
+	*val = readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+	return 0;
 }
 
 
-static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
-			       u32 val)
+static int vsc_sata_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
 {
 	if (sc_reg > SCR_CONTROL)
-		return;
+		return -EINVAL;
 	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+	return 0;
 }
 
 
@@ -239,7 +240,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 		return;
 	}
 
-	qc = ata_qc_from_tag(ap, ap->active_tag);
+	qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
 		handled = ata_host_intr(ap, qc);
 
@@ -316,7 +317,6 @@ static struct scsi_host_template vsc_sata_sht = {
 
 
 static const struct ata_port_operations vsc_sata_ops = {
-	.port_disable		= ata_port_disable,
 	.tf_load		= vsc_sata_tf_load,
 	.tf_read		= vsc_sata_tf_read,
 	.exec_command		= ata_exec_command,
@@ -335,7 +335,6 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 	.scr_read		= vsc_sata_scr_read,
 	.scr_write		= vsc_sata_scr_write,
 	.port_start		= ata_port_start,
@@ -407,9 +406,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
 	mmio_base = host->iomap[VSC_MMIO_BAR];
 
-	for (i = 0; i < host->n_ports; i++)
-		vsc_sata_setup_port(&host->ports[i]->ioaddr,
-				    mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
+
+		vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
+	}
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.