X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fsata_vsc.c;h=95ae3ed24a9dd39eb6b223e87dbb16b918ba2108;hb=8cebf274dd1c955a6e03385a85fd6569ce445946;hp=1920915dfa2ca41f5856d591b1fd1fd740b971ff;hpb=5e7a39275b00ec881790ce47b8f7363fdfa097fa;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 1920915dfa2..95ae3ed24a9 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -162,7 +162,8 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 	/*
 	 * The only thing the ctl register is used for is SRST.
 	 * That is not enabled or disabled via tf_load.
-	 * However, if ATA_NIEN is changed, then we need to change the interrupt register.
+	 * However, if ATA_NIEN is changed, then we need to change
+	 * the interrupt register.
 	 */
 	if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
 		ap->last_ctl = tf->ctl;
@@ -219,7 +220,7 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 		tf->hob_lbal = lbal >> 8;
 		tf->hob_lbam = lbam >> 8;
 		tf->hob_lbah = lbah >> 8;
-        }
+	}
 }
 
 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
@@ -240,7 +241,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 		return;
 	}
 
-	qc = ata_qc_from_tag(ap, ap->active_tag);
+	qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
 		handled = ata_host_intr(ap, qc);
 
@@ -256,9 +257,10 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 /*
  * vsc_sata_interrupt
  *
- * Read the interrupt register and process for the devices that have them pending.
+ * Read the interrupt register and process for the devices that have
+ * them pending.
  */
-static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
+static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
 	unsigned int i;
@@ -287,7 +289,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
 				handled++;
 			} else
 				dev_printk(KERN_ERR, host->dev,
-					": interrupt from disabled port %d\n", i);
+					"interrupt from disabled port %d\n", i);
 		}
 	}
 
@@ -317,7 +319,6 @@ static struct scsi_host_template vsc_sata_sht = {
 
 
 static const struct ata_port_operations vsc_sata_ops = {
-	.port_disable		= ata_port_disable,
 	.tf_load		= vsc_sata_tf_load,
 	.tf_read		= vsc_sata_tf_read,
 	.exec_command		= ata_exec_command,
@@ -336,7 +337,6 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 	.scr_read		= vsc_sata_scr_read,
 	.scr_write		= vsc_sata_scr_write,
 	.port_start		= ata_port_start,
@@ -365,7 +365,8 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
 }
 
 
-static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
+				       const struct pci_device_id *ent)
 {
 	static const struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -408,9 +409,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
 	mmio_base = host->iomap[VSC_MMIO_BAR];
 
-	for (i = 0; i < host->n_ports; i++)
-		vsc_sata_setup_port(&host->ports[i]->ioaddr,
-				    mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
+
+		vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
+	}
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.