X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fhwmon%2Fadm1021.c;h=2b6e74dd4a82079c6eb18b44719846c33ae961ed;hb=075395d228641646159dae3dd170fa3fc6ff477a;hp=e928cdb041cba28d76f23821172becc7c3589397;hpb=4706df3d3c42af802597d82c8b1542c3d52eab23;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index e928cdb041c..2b6e74dd4a8 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/err.h>
+#include <linux/mutex.h>
 
 
 /* Addresses to scan */
@@ -92,7 +93,7 @@ struct adm1021_data {
 	struct class_device *class_dev;
 	enum chips type;
 
-	struct semaphore update_lock;
+	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
@@ -121,15 +122,15 @@ static int adm1021_write_value(struct i2c_client *client, u8 reg,
 static struct adm1021_data *adm1021_update_device(struct device *dev);
 
 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only = 0;
+static int read_only;
 
 
 /* This is the driver that will be inserted */
 static struct i2c_driver adm1021_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "adm1021",
+	.driver = {
+		.name	= "adm1021",
+	},
 	.id		= I2C_DRIVERID_ADM1021,
-	.flags		= I2C_DF_NOTIFY,
 	.attach_adapter	= adm1021_attach_adapter,
 	.detach_client	= adm1021_detach_client,
 };
@@ -162,10 +163,10 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	struct adm1021_data *data = i2c_get_clientdata(client);	\
 	int temp = simple_strtoul(buf, NULL, 10);		\
 								\
-	down(&data->update_lock);				\
+	mutex_lock(&data->update_lock);				\
 	data->value = TEMP_TO_REG(temp);			\
 	adm1021_write_value(client, reg, data->value);		\
-	up(&data->update_lock);					\
+	mutex_unlock(&data->update_lock);			\
 	return count;						\
 }
 set(temp_max, ADM1021_REG_TOS_W);
@@ -204,11 +205,10 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 	   client structure, even though we cannot fill it completely yet.
 	   But it allows us to access adm1021_{read,write}_value. */
 
-	if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto error0;
 	}
-	memset(data, 0, sizeof(struct adm1021_data));
 
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
@@ -276,7 +276,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
 	data->type = kind;
 	data->valid = 0;
-	init_MUTEX(&data->update_lock);
+	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -352,7 +352,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1021_data *data = i2c_get_clientdata(client);
 
-	down(&data->update_lock);
+	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
@@ -376,7 +376,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
 		data->valid = 1;
 	}
 
-	up(&data->update_lock);
+	mutex_unlock(&data->update_lock);
 
 	return data;
 }