X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2FKconfig;h=92b01170d8f35bb0ad7ff6df059929a52997d77f;hb=e665d50543981efef940178b95994b73ec41b77d;hp=ee01e273a53711ddf23244296425342c98a955b0;hpb=50d9a126240f9961cfdd063336bbeb91f77a7dce;p=linux-2.6-omap-h63xx.git diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ee01e273a53..92b01170d8f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -325,7 +325,7 @@ config BLK_DEV_PLATFORM If unsure, say N. config BLK_DEV_CMD640 - bool "CMD640 chipset bugfix/support" + tristate "CMD640 chipset bugfix/support" depends on X86 ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and @@ -359,9 +359,8 @@ config BLK_DEV_CMD640_ENHANCED Otherwise say N. config BLK_DEV_IDEPNP - bool "PNP EIDE support" + tristate "PNP EIDE support" depends on PNP - select IDE_GENERIC help If you have a PnP (Plug and Play) compatible EIDE card and would like the kernel to automatically detect and activate @@ -375,7 +374,19 @@ config BLK_DEV_IDEPCI bool config IDEPCI_PCIBUS_ORDER - def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI + bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)" + depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI + default y + help + Probe IDE PCI devices in the order in which they appear on the + PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device) + instead of the order in which IDE PCI host drivers are loaded. + + Please note that this method of assuring stable naming of + IDE devices is unreliable and use other means for achieving + it (i.e. udev). + + If in doubt, say N. # TODO: split it on per host driver config options (or module parameters) config BLK_DEV_OFFBOARD @@ -606,8 +617,8 @@ config BLK_DEV_SC1200 tristate "National SCx200 chipset support" select BLK_DEV_IDEDMA_PCI help - This driver adds support for the built in IDE on the National - SCx200 series of embedded x86 "Geode" systems + This driver adds support for the on-board IDE controller on the + National SCx200 series of embedded x86 "Geode" systems. config BLK_DEV_PIIX tristate "Intel PIIXn chipsets support" @@ -782,22 +793,22 @@ config BLK_DEV_CELLEB depends on PPC_CELLEB select BLK_DEV_IDEDMA_PCI help - This driver provides support for the built-in IDE controller on + This driver provides support for the on-board IDE controller on Toshiba Cell Reference Board. If unsure, say Y. endif config BLK_DEV_IDE_PMAC - bool "Builtin PowerMac IDE support" + tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y help - This driver provides support for the built-in IDE controller on + This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. If unsure, say Y. config BLK_DEV_IDE_PMAC_ATA100FIRST - bool "Probe internal ATA/100 (Kauai) first" + bool "Probe on-board ATA/100 (Kauai) first" depends on BLK_DEV_IDE_PMAC help This option will cause the ATA/100 controller found in UniNorth2 @@ -812,7 +823,7 @@ config BLK_DEV_IDEDMA_PMAC depends on BLK_DEV_IDE_PMAC select BLK_DEV_IDEDMA_PCI help - This option allows the driver for the built-in IDE controller on + This option allows the driver for the on-board IDE controller on Power Macintoshes and PowerBooks to use DMA (direct memory access) to transfer data to and from memory. Saying Y is safe and improves performance. @@ -843,8 +854,9 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ depends on BLK_DEV_IDE_AU1XXX config IDE_ARM - def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) - select IDE_GENERIC + tristate "ARM IDE support" + depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + default y config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" @@ -876,10 +888,9 @@ config BLK_DEV_IDE_BAST Simtec BAST or the Thorcom VR1000 config ETRAX_IDE - bool "ETRAX IDE support" + tristate "ETRAX IDE support" depends on CRIS && BROKEN select BLK_DEV_IDEDMA - select IDE_GENERIC help Enables the ETRAX IDE driver. @@ -911,21 +922,19 @@ config ETRAX_IDE_G27_RESET endchoice config IDE_H8300 - bool "H8300 IDE support" + tristate "H8300 IDE support" depends on H8300 - select IDE_GENERIC default y help Enables the H8300 IDE driver. config BLK_DEV_GAYLE - bool "Amiga Gayle IDE interface support" + tristate "Amiga Gayle IDE interface support" depends on AMIGA - select IDE_GENERIC help This is the IDE driver for the Amiga Gayle IDE interface. It supports both the `A1200 style' and `A4000 style' of the Gayle IDE interface, - This includes builtin IDE interfaces on some Amiga models (A600, + This includes on-board IDE interfaces on some Amiga models (A600, A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion bus (M-Tech E-Matrix 530 expansion card). Say Y if you have an Amiga with a Gayle IDE interface and want to use @@ -939,10 +948,10 @@ config BLK_DEV_IDEDOUBLER depends on BLK_DEV_GAYLE && EXPERIMENTAL ---help--- This driver provides support for the so-called `IDE doublers' (made - by various manufacturers, e.g. Eyetech) that can be connected to the - builtin IDE interface of some Amiga models. Using such an IDE - doubler, you can connect up to four instead of two IDE devices on - the Amiga's builtin IDE interface. + by various manufacturers, e.g. Eyetech) that can be connected to + the on-board IDE interface of some Amiga models. Using such an IDE + doubler, you can connect up to four instead of two IDE devices to + the Amiga's on-board IDE interface. Note that the normal Amiga Gayle IDE driver may not work correctly if you have an IDE doubler and don't enable this driver! @@ -951,55 +960,50 @@ config BLK_DEV_IDEDOUBLER runtime using the "ide=doubler" kernel boot parameter. config BLK_DEV_BUDDHA - bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" + tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" depends on ZORRO && EXPERIMENTAL - select IDE_GENERIC help - This is the IDE driver for the IDE interfaces on the Buddha, - Catweasel and X-Surf expansion boards. It supports up to two interfaces - on the Buddha, three on the Catweasel and two on the X-Surf. + This is the IDE driver for the IDE interfaces on the Buddha, Catweasel + and X-Surf expansion boards. It supports up to two interfaces on the + Buddha, three on the Catweasel and two on the X-Surf. Say Y if you have a Buddha or Catweasel expansion board and want to use IDE devices (hard disks, CD-ROM drives, etc.) that are connected to one of its IDE interfaces. config BLK_DEV_FALCON_IDE - bool "Falcon IDE interface support" + tristate "Falcon IDE interface support" depends on ATARI - select IDE_GENERIC help - This is the IDE driver for the builtin IDE interface on the Atari + This is the IDE driver for the on-board IDE interface on the Atari Falcon. Say Y if you have a Falcon and want to use IDE devices (hard - disks, CD-ROM drives, etc.) that are connected to the builtin IDE + disks, CD-ROM drives, etc.) that are connected to the on-board IDE interface. config BLK_DEV_MAC_IDE - bool "Macintosh Quadra/Powerbook IDE interface support" + tristate "Macintosh Quadra/Powerbook IDE interface support" depends on MAC - select IDE_GENERIC help - This is the IDE driver for the builtin IDE interface on some m68k + This is the IDE driver for the on-board IDE interface on some m68k Macintosh models. It supports both the `Quadra style' (used in Quadra/ Centris 630 and Performa 588 models) and `Powerbook style' (used in the Powerbook 150 and 190 models) IDE interface. Say Y if you have such an Macintosh model and want to use IDE devices (hard disks, CD-ROM drives, etc.) that are connected to the - builtin IDE interface. + on-board IDE interface. config BLK_DEV_Q40IDE - bool "Q40/Q60 IDE interface support" + tristate "Q40/Q60 IDE interface support" depends on Q40 - select IDE_GENERIC help Enable the on-board IDE controller in the Q40/Q60. This should normally be on; disable it only if you are running a custom hard drive subsystem through an expansion card. config BLK_DEV_MPC8xx_IDE - bool "MPC8xx IDE support" + tristate "MPC8xx IDE support" depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. Please see 'Type of MPC8xx IDE interface' for details. @@ -1058,8 +1062,8 @@ config BLK_DEV_ALI14XX boot parameter. It enables support for the secondary IDE interface of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster I/O speeds to be set as well. See the files - and for - more info. + and + for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -1084,8 +1088,8 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - and for - more info. + and + for more info. config BLK_DEV_UMC8672 tristate "UMC-8672 support"