X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fide-dma.c;h=d0e7b537353e38ea1bb23ff6f0604f0d93777752;hb=8e882ba111bb52fbb42c34a265afb97ddd4fcea1;hp=64fd78ba281083adeab928da2e7790d726112e94;hpb=062f9f024dcdb927cfd35c9ee8a68f59cbb1136f;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 64fd78ba281..d0e7b537353 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1,15 +1,13 @@
 /*
- *  linux/drivers/ide/ide-dma.c		Version 4.10	June 9, 2000
+ *  Copyright (C) 1995-1998   Mark Lord
+ *  Copyright (C) 1999-2000   Andre Hedrick <andre@linux-ide.org>
+ *  Copyright (C) 2004, 2007  Bartlomiej Zolnierkiewicz
  *
- *  Copyright (c) 1999-2000	Andre Hedrick <andre@linux-ide.org>
  *  May be copied or modified under the terms of the GNU General Public License
  */
 
 /*
  *  Special Thanks to Mark for his Six years of work.
- *
- *  Copyright (c) 1995-1998  Mark Lord
- *  May be copied or modified under the terms of the GNU General Public License
  */
 
 /*
@@ -149,7 +147,8 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
 	u8 stat = 0, dma_stat = 0;
 
 	dma_stat = HWIF(drive)->ide_dma_end(drive);
-	stat = HWIF(drive)->INB(IDE_STATUS_REG);	/* get drive status */
+	stat = ide_read_status(drive);
+
 	if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
 		if (!dma_stat) {
 			struct request *rq = HWGROUP(drive)->rq;
@@ -199,7 +198,7 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
 
 EXPORT_SYMBOL_GPL(ide_build_sglist);
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 /**
  *	ide_build_dmatable	-	build IDE DMA table
  *
@@ -317,7 +316,7 @@ void ide_destroy_dmatable (ide_drive_t *drive)
 
 EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 /**
  *	config_drive_for_dma	-	attempt to activate IDE DMA
  *	@drive: the drive to place in DMA mode
@@ -425,7 +424,7 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
 }
 
 EXPORT_SYMBOL_GPL(ide_dma_host_set);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+#endif /* CONFIG_BLK_DEV_IDEDMA_SFF  */
 
 /**
  *	ide_dma_off_quietly	-	Generic DMA kill
@@ -475,7 +474,7 @@ void ide_dma_on(ide_drive_t *drive)
 	drive->hwif->dma_host_set(drive, 1);
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 /**
  *	ide_dma_setup	-	begin a DMA phase
  *	@drive: target device
@@ -592,7 +591,7 @@ static int __ide_dma_test_irq(ide_drive_t *drive)
 }
 #else
 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
 
 int __ide_dma_bad_drive (ide_drive_t *drive)
 {
@@ -821,7 +820,27 @@ int ide_set_dma(ide_drive_t *drive)
 	return 0;
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+void ide_check_dma_crc(ide_drive_t *drive)
+{
+	u8 mode;
+
+	ide_dma_off_quietly(drive);
+	drive->crc_count = 0;
+	mode = drive->current_speed;
+	/*
+	 * Don't try non Ultra-DMA modes without iCRC's.  Force the
+	 * device to PIO and make the user enable SWDMA/MWDMA modes.
+	 */
+	if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
+		mode--;
+	else
+		mode = XFER_PIO_4;
+	ide_set_xfer_rate(drive, mode);
+	if (drive->current_speed >= XFER_SW_DMA_0)
+		ide_dma_on(drive);
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 void ide_dma_lost_irq (ide_drive_t *drive)
 {
 	printk("%s: DMA interrupt recovery\n", drive->name);
@@ -983,4 +1002,4 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
 }
 
 EXPORT_SYMBOL_GPL(ide_setup_dma);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */