X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fide.c;h=a96a8b1b3539b8bdec2972fc0f07eeca21f4f420;hb=7eff2e7a8b65c25920207324e56611150eb1cd9a;hp=0af0d1614f7553350a737edce67b0c931352fec1;hpb=0d2157f78d17fcee17791f54959e67cc0af0da74;p=linux-2.6-omap-h63xx.git diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 0af0d1614f7..a96a8b1b353 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -16,10 +16,6 @@ * (usually 14 & 15). * There can be up to two drives per interface, as per the ATA-2 spec. * - * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 - * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 - * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64 - * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64 * ... * * From hd.c: @@ -47,80 +43,6 @@ * This was a rewrite of just about everything from hd.c, though some original * code is still sprinkled about. Think of it as a major evolution, with * inspiration from lots of linux users, esp. hamish@zot.apana.org.au - * - * Version 1.0 ALPHA initial code, primary i/f working okay - * Version 1.3 BETA dual i/f on shared irq tested & working! - * Version 1.4 BETA added auto probing for irq(s) - * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms, - * ... - * Version 5.50 allow values as small as 20 for idebus= - * Version 5.51 force non io_32bit in drive_cmd_intr() - * change delay_10ms() to delay_50ms() to fix problems - * Version 5.52 fix incorrect invalidation of removable devices - * add "hdx=slow" command line option - * Version 5.60 start to modularize the driver; the disk and ATAPI - * drivers can be compiled as loadable modules. - * move IDE probe code to ide-probe.c - * move IDE disk code to ide-disk.c - * add support for generic IDE device subdrivers - * add m68k code from Geert Uytterhoeven - * probe all interfaces by default - * add ioctl to (re)probe an interface - * Version 6.00 use per device request queues - * attempt to optimize shared hwgroup performance - * add ioctl to manually adjust bandwidth algorithms - * add kerneld support for the probe module - * fix bug in ide_error() - * fix bug in the first ide_get_lock() call for Atari - * don't flush leftover data for ATAPI devices - * Version 6.01 clear hwgroup->active while the hwgroup sleeps - * support HDIO_GETGEO for floppies - * Version 6.02 fix ide_ack_intr() call - * check partition table on floppies - * Version 6.03 handle bad status bit sequencing in ide_wait_stat() - * Version 6.10 deleted old entries from this list of updates - * replaced triton.c with ide-dma.c generic PCI DMA - * added support for BIOS-enabled UltraDMA - * rename all "promise" things to "pdc4030" - * fix EZ-DRIVE handling on small disks - * Version 6.11 fix probe error in ide_scan_devices() - * fix ancient "jiffies" polling bugs - * mask all hwgroup interrupts on each irq entry - * Version 6.12 integrate ioctl and proc interfaces - * fix parsing of "idex=" command line parameter - * Version 6.13 add support for ide4/ide5 courtesy rjones@orchestream.com - * Version 6.14 fixed IRQ sharing among PCI devices - * Version 6.15 added SMP awareness to IDE drivers - * Version 6.16 fixed various bugs; even more SMP friendly - * Version 6.17 fix for newest EZ-Drive problem - * Version 6.18 default unpartitioned-disk translation now "BIOS LBA" - * Version 6.19 Re-design for a UNIFORM driver for all platforms, - * model based on suggestions from Russell King and - * Geert Uytterhoeven - * Promise DC4030VL now supported. - * add support for ide6/ide7 - * delay_50ms() changed to ide_delay_50ms() and exported. - * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection. - * Added hdx=flash to allow for second flash disk - * detection w/o the hang loop. - * Added support for ide8/ide9 - * Added idex=ata66 for the quirky chipsets that are - * ATA-66 compliant, but have yet to determine a method - * of verification of the 80c cable presence. - * Specifically Promise's PDC20262 chipset. - * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old - * hat that clarified original low level driver design. - * Version 6.30 Added SMP support; fixed multmode issues. -ml - * Version 6.31 Debug Share INTR's and request queue streaming - * Native ATA-100 support - * Prep for Cascades Project - * Version 7.00alpha First named revision of ide rearrange - * - * Some additional driver compile-time options are in ./include/linux/ide.h - * - * To do, in likely order of completion: - * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f - * */ #define REVISION "Revision: 7.00alpha2" @@ -169,7 +91,7 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, static int idebus_parameter; /* holds the "idebus=" parameter */ static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ -DECLARE_MUTEX(ide_cfg_sem); +DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); #ifdef CONFIG_IDEPCI_PCIBUS_ORDER @@ -455,11 +377,17 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->straight8 = tmp_hwif->straight8; hwif->bus_state = tmp_hwif->bus_state; + hwif->host_flags = tmp_hwif->host_flags; + + hwif->pio_mask = tmp_hwif->pio_mask; + hwif->atapi_dma = tmp_hwif->atapi_dma; hwif->ultra_mask = tmp_hwif->ultra_mask; hwif->mwdma_mask = tmp_hwif->mwdma_mask; hwif->swdma_mask = tmp_hwif->swdma_mask; + hwif->cbl = tmp_hwif->cbl; + hwif->chipset = tmp_hwif->chipset; hwif->hold = tmp_hwif->hold; @@ -468,8 +396,9 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->cds = tmp_hwif->cds; #endif - hwif->tuneproc = tmp_hwif->tuneproc; + hwif->set_pio_mode = tmp_hwif->set_pio_mode; hwif->speedproc = tmp_hwif->speedproc; + hwif->mdma_filter = tmp_hwif->mdma_filter; hwif->udma_filter = tmp_hwif->udma_filter; hwif->selectproc = tmp_hwif->selectproc; hwif->reset_poll = tmp_hwif->reset_poll; @@ -496,8 +425,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; hwif->dma_host_on = tmp_hwif->dma_host_on; hwif->dma_host_off = tmp_hwif->dma_host_off; - hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq; - hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout; + hwif->dma_lost_irq = tmp_hwif->dma_lost_irq; + hwif->dma_timeout = tmp_hwif->dma_timeout; hwif->OUTB = tmp_hwif->OUTB; hwif->OUTBSYNC = tmp_hwif->OUTBSYNC; @@ -533,7 +462,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->extra_base = tmp_hwif->extra_base; hwif->extra_ports = tmp_hwif->extra_ports; hwif->autodma = tmp_hwif->autodma; - hwif->udma_four = tmp_hwif->udma_four; hwif->hwif_data = tmp_hwif->hwif_data; } @@ -564,7 +492,7 @@ void ide_unregister(unsigned int index) { ide_drive_t *drive; ide_hwif_t *hwif, *g; - static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */ + static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */ ide_hwgroup_t *hwgroup; int irq_count = 0, unit; @@ -572,7 +500,7 @@ void ide_unregister(unsigned int index) BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); - down(&ide_cfg_sem); + mutex_lock(&ide_cfg_mtx); spin_lock_irq(&ide_lock); hwif = &ide_hwifs[index]; if (!hwif->present) @@ -679,7 +607,7 @@ void ide_unregister(unsigned int index) abort: spin_unlock_irq(&ide_lock); - up(&ide_cfg_sem); + mutex_unlock(&ide_cfg_mtx); } EXPORT_SYMBOL(ide_unregister); @@ -817,9 +745,9 @@ EXPORT_SYMBOL(ide_register_hw); * Locks for IDE setting functionality */ -DECLARE_MUTEX(ide_setting_sem); +DEFINE_MUTEX(ide_setting_mtx); -EXPORT_SYMBOL_GPL(ide_setting_sem); +EXPORT_SYMBOL_GPL(ide_setting_mtx); /** * ide_spin_wait_hwgroup - wait for group @@ -939,8 +867,9 @@ int set_pio_mode(ide_drive_t *drive, int arg) if (arg < 0 || arg > 255) return -EINVAL; - if (!HWIF(drive)->tuneproc) + if (drive->hwif->set_pio_mode == NULL) return -ENOSYS; + if (drive->special.b.set_tune) return -EBUSY; ide_init_drive_cmd(&rq); @@ -987,6 +916,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) struct request rq; struct request_pm_state rqpm; ide_task_t args; + int ret; /* Call ACPI _GTM only once */ if (!(drive->dn % 2)) @@ -1003,22 +933,30 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) mesg.event = PM_EVENT_FREEZE; rqpm.pm_state = mesg.event; - return ide_do_drive_cmd(drive, &rq, ide_wait); + ret = ide_do_drive_cmd(drive, &rq, ide_wait); + /* only call ACPI _PS3 after both drivers are suspended */ + if (!ret && (((drive->dn % 2) && hwif->drives[0].present + && hwif->drives[1].present) + || !hwif->drives[0].present + || !hwif->drives[1].present)) + ide_acpi_set_state(hwif, 0); + return ret; } static int generic_ide_resume(struct device *dev) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); - ide_driver_t *drv = to_ide_driver(dev->driver); struct request rq; struct request_pm_state rqpm; ide_task_t args; int err; /* Call ACPI _STM only once */ - if (!(drive->dn % 2)) + if (!(drive->dn % 2)) { + ide_acpi_set_state(hwif, 1); ide_acpi_push_timing(hwif); + } ide_acpi_exec_tfs(drive); @@ -1033,8 +971,12 @@ static int generic_ide_resume(struct device *dev) err = ide_do_drive_cmd(drive, &rq, ide_head_wait); - if (err == 0 && drv && drv->resume) - drv->resume(drive); + if (err == 0 && dev->driver) { + ide_driver_t *drv = to_ide_driver(dev->driver); + + if (drv->resume) + drv->resume(drive); + } return err; } @@ -1167,10 +1109,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device return 0; } - case CDROMEJECT: - case CDROMCLOSETRAY: - return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p); - case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1189,11 +1127,11 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device } read_val: - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); spin_lock_irqsave(&ide_lock, flags); err = *val; spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); return err >= 0 ? put_user(err, (long __user *)arg) : err; set_val: @@ -1203,9 +1141,9 @@ set_val: if (!capable(CAP_SYS_ADMIN)) err = -EACCES; else { - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); err = setfunc(drive, arg); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); } } return err; @@ -1545,7 +1483,11 @@ static int __init ide_setup(char *s) goto bad_option; case -7: /* ata66 */ #ifdef CONFIG_BLK_DEV_IDEPCI - hwif->udma_four = 1; + /* + * Use ATA_CBL_PATA40_SHORT so drive side + * cable detection is also overriden. + */ + hwif->cbl = ATA_CBL_PATA40_SHORT; goto obsolete_option; #else goto bad_hwif; @@ -1721,20 +1663,13 @@ static struct device_attribute ide_dev_attrs[] = { __ATTR_NULL }; -static int ide_uevent(struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) +static int ide_uevent(struct device *dev, struct kobj_uevent_env *env) { ide_drive_t *drive = to_ide_device(dev); - int i = 0; - int length = 0; - - add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, - "MEDIA=%s", media_string(drive)); - add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, - "DRIVENAME=%s", drive->name); - add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, - "MODALIAS=ide:m-%s", media_string(drive)); - envp[i] = NULL; + + add_uevent_var(env, "MEDIA=%s", media_string(drive)); + add_uevent_var(env, "DRIVENAME=%s", drive->name); + add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive)); return 0; }