X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Flegacy%2Fali14xx.c;h=4ec19737f3c5356e88e00403714e0afa482bc3f4;hb=f39548a6ad1dbdfaab552419386ec5bb1d76fa0d;hp=d4d1a6bea599e3bf93dbae01d4e05dc5ffd2d9f7;hpb=acf63867ae06ef95eea7bf445ded2f05528a81b1;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index d4d1a6bea59..4ec19737f3c 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -49,6 +49,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "ali14xx"
+
 /* port addresses for auto-detection */
 #define ALI_NUM_PORTS 4
 static const int ports[ALI_NUM_PORTS] __initdata =
@@ -86,7 +88,7 @@ static u8 regOff;	/* output to base port to close registers */
 /*
  * Read a controller register.
  */
-static inline u8 inReg (u8 reg)
+static inline u8 inReg(u8 reg)
 {
 	outb_p(reg, regPort);
 	return inb(dataPort);
@@ -95,7 +97,7 @@ static inline u8 inReg (u8 reg)
 /*
  * Write a controller register.
  */
-static void outReg (u8 data, u8 reg)
+static void outReg(u8 data, u8 reg)
 {
 	outb_p(reg, regPort);
 	outb_p(data, dataPort);
@@ -114,11 +116,12 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	int time1, time2;
 	u8 param1, param2, param3, param4;
 	unsigned long flags;
-	int bus_speed = system_bus_clock();
+	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
+	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
 
 	/* calculate timing, according to PIO mode */
 	time1 = ide_pio_cycle_time(drive, pio);
-	time2 = ide_pio_timings[pio].active_time;
+	time2 = t->active;
 	param3 = param1 = (time2 * bus_speed + 999) / 1000;
 	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
 	if (pio < 3) {
@@ -143,7 +146,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 /*
  * Auto-detect the IDE controller port.
  */
-static int __init findPort (void)
+static int __init findPort(void)
 {
 	int i;
 	u8 t;
@@ -175,7 +178,8 @@ static int __init findPort (void)
 /*
  * Initialize controller registers with default values.
  */
-static int __init initRegisters (void) {
+static int __init initRegisters(void)
+{
 	const RegInitializer *p;
 	u8 t;
 	unsigned long flags;
@@ -191,16 +195,20 @@ static int __init initRegisters (void) {
 	return t;
 }
 
+static const struct ide_port_ops ali14xx_port_ops = {
+	.set_pio_mode		= ali14xx_set_pio_mode,
+};
+
 static const struct ide_port_info ali14xx_port_info = {
+	.name			= DRV_NAME,
 	.chipset		= ide_ali14xx,
-	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+	.port_ops		= &ali14xx_port_ops,
+	.host_flags		= IDE_HFLAG_NO_DMA,
 	.pio_mask		= ATA_PIO4,
 };
 
 static int __init ali14xx_probe(void)
 {
-	static u8 idx[4] = { 0, 1, 0xff, 0xff };
-
 	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
 			  basePort, regOn);
 
@@ -210,15 +218,10 @@ static int __init ali14xx_probe(void)
 		return 1;
 	}
 
-	ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode;
-	ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode;
-
-	ide_device_add(idx, &ali14xx_port_info);
-
-	return 0;
+	return ide_legacy_device_add(&ali14xx_port_info, 0);
 }
 
-int probe_ali14xx = 0;
+static int probe_ali14xx;
 
 module_param_named(probe, probe_ali14xx, bool, 0);
 MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");