X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Fcy82c693.c;h=103b9db97853046d38550e7c496de20a47460113;hb=5826b318aa02e81575c352ca26f00773c999795b;hp=9f41ecd563385c500d74378c17761436b2549e75;hpb=3d5271f9883cba7b54762bc4fe027d4172f06db7;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 9f41ecd5633..103b9db9785 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -44,7 +44,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
@@ -198,8 +197,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 #if CY82C693_DEBUG_LOGS
 	/* for debug let's show the previous values */
 
-	HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
-	data = HWIF(drive)->INB(CY82_DATA_PORT);
+	outb(index, CY82_INDEX_PORT);
+	data = inb(CY82_DATA_PORT);
 
 	printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
 		drive->name, HWIF(drive)->channel, drive->select.b.unit,
@@ -208,8 +207,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 
 	data = (u8)mode|(u8)(single<<2);
 
-	HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
-	HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+	outb(index, CY82_INDEX_PORT);
+	outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
 	printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
@@ -228,8 +227,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 	 */
 
 	data = BUSMASTER_TIMEOUT;
-	HWIF(drive)->OUTB(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
-	HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+	outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO	
 	printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
@@ -282,7 +281,7 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
 
 	/* select primary or secondary channel */
 	if (hwif->index > 0) {  /* drive is on the secondary channel */
-		dev = pci_find_slot(dev->bus->number, dev->devfn+1);
+		dev = pci_get_slot(dev->bus, dev->devfn+1);
 		if (!dev) {
 			printk(KERN_ERR "%s: tune_drive: "
 				"Cannot find secondary interface!\n",
@@ -479,21 +478,18 @@ static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
 	}
 }
 
-static ide_pci_device_t cy82c693_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "CY82C693",
-		.init_chipset	= init_chipset_cy82c693,
-		.init_iops	= init_iops_cy82c693,
-		.init_hwif	= init_hwif_cy82c693,
-		.channels	= 1,
-		.autodma	= AUTODMA,
-		.bootable	= ON_BOARD,
-	}
+static ide_pci_device_t cy82c693_chipset __devinitdata = {
+	.name		= "CY82C693",
+	.init_chipset	= init_chipset_cy82c693,
+	.init_iops	= init_iops_cy82c693,
+	.init_hwif	= init_hwif_cy82c693,
+	.channels	= 1,
+	.autodma	= AUTODMA,
+	.bootable	= ON_BOARD,
 };
 
 static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_pci_device_t *d = &cy82c693_chipsets[id->driver_data];
 	struct pci_dev *dev2;
 	int ret = -ENODEV;
 
@@ -501,8 +497,9 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev
 	   Function 1 is primary IDE channel, function 2 - secondary. */
         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	    PCI_FUNC(dev->devfn) == 1) {
-		dev2 = pci_find_slot(dev->bus->number, dev->devfn + 1);
-		ret = ide_setup_pci_devices(dev, dev2, d);
+		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
+		ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset);
+		/* We leak pci refs here but thats ok - we can't be unloaded */
 	}
 	return ret;
 }
@@ -519,7 +516,7 @@ static struct pci_driver driver = {
 	.probe		= cy82c693_init_one,
 };
 
-static int cy82c693_ide_init(void)
+static int __init cy82c693_ide_init(void)
 {
 	return ide_pci_register_driver(&driver);
 }