X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Fcy82c693.c;h=dc278025d318c8c6202532b38a1bf7f2ba646f2a;hb=dd6d1844af33acb4edd0a40b1770d091a22c94be;hp=9eafcbf444f4d0cb629ae14e00f354544113444c;hpb=51e6ed23fc95c3e710d8a98717924ccb2571aa66;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 9eafcbf444f..dc278025d31 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -97,9 +97,6 @@
 #define CY82_INDEX_CHANNEL1	0x31
 #define CY82_INDEX_TIMEOUT	0x32
 
-/* the max PIO mode - from datasheet */
-#define CY82C693_MAX_PIO	4
-
 /* the min and max PCI bus speed in MHz - from datasheet */
 #define CY82C963_MIN_BUS_SPEED	25
 #define CY82C963_MAX_BUS_SPEED	33
@@ -148,9 +145,6 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
 	 * so you can play with the idebus=xx parameter
 	 */
 
-	if (pio > CY82C693_MAX_PIO)
-		pio = CY82C693_MAX_PIO;
-
 	/* let's calc the address setup time clocks */
 	p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
 
@@ -197,8 +191,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 #if CY82C693_DEBUG_LOGS
 	/* for debug let's show the previous values */
 
-	HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
-	data = HWIF(drive)->INB(CY82_DATA_PORT);
+	outb(index, CY82_INDEX_PORT);
+	data = inb(CY82_DATA_PORT);
 
 	printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
 		drive->name, HWIF(drive)->channel, drive->select.b.unit,
@@ -207,8 +201,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 
 	data = (u8)mode|(u8)(single<<2);
 
-	HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
-	HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+	outb(index, CY82_INDEX_PORT);
+	outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
 	printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
@@ -227,8 +221,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
 	 */
 
 	data = BUSMASTER_TIMEOUT;
-	HWIF(drive)->OUTB(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
-	HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+	outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO	
 	printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
@@ -269,10 +263,7 @@ static int cy82c693_ide_dma_on (ide_drive_t *drive)
         return __ide_dma_on(drive);
 }
 
-/*
- * tune ide drive - set PIO mode
- */
-static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
+static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = HWIF(drive);
 	struct pci_dev *dev = hwif->pci_dev;
@@ -329,13 +320,6 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
 		addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
 #endif /* CY82C693_DEBUG_LOGS */
 
-	/* first let's calc the pio modes */
-	pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
-
-#if CY82C693_DEBUG_INFO
-	printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
-#endif /* CY82C693_DEBUG_INFO */
-
 	/* let's calc the values for this PIO mode */
 	compute_clocks(pio, &pclk);
 
@@ -447,7 +431,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
 	hwif->autodma = 0;
 
 	hwif->chipset = ide_cy82c693;
-	hwif->tuneproc = &cy82c693_tune_drive;
+	hwif->set_pio_mode = &cy82c693_set_pio_mode;
 
 	if (!hwif->dma_base) {
 		hwif->drives[0].autotune = 1;
@@ -478,21 +462,19 @@ static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
 	}
 }
 
-static ide_pci_device_t cy82c693_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "CY82C693",
-		.init_chipset	= init_chipset_cy82c693,
-		.init_iops	= init_iops_cy82c693,
-		.init_hwif	= init_hwif_cy82c693,
-		.channels	= 1,
-		.autodma	= AUTODMA,
-		.bootable	= ON_BOARD,
-	}
+static ide_pci_device_t cy82c693_chipset __devinitdata = {
+	.name		= "CY82C693",
+	.init_chipset	= init_chipset_cy82c693,
+	.init_iops	= init_iops_cy82c693,
+	.init_hwif	= init_hwif_cy82c693,
+	.autodma	= AUTODMA,
+	.bootable	= ON_BOARD,
+	.host_flags	= IDE_HFLAG_SINGLE,
+	.pio_mask	= ATA_PIO4,
 };
 
 static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_pci_device_t *d = &cy82c693_chipsets[id->driver_data];
 	struct pci_dev *dev2;
 	int ret = -ENODEV;
 
@@ -501,7 +483,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev
         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	    PCI_FUNC(dev->devfn) == 1) {
 		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
-		ret = ide_setup_pci_devices(dev, dev2, d);
+		ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset);
 		/* We leak pci refs here but thats ok - we can't be unloaded */
 	}
 	return ret;