X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Ftriflex.c;h=a67d02a3f96e108484f42b71cbbbeec9dc97a6aa;hb=4cb4f22b19237e63c460c53fbd1c417cdaf63014;hp=54e411d4e56cfe5d2c538c85946b1651828fb1d4;hpb=4fa435018d740cb83d74c92306aa1f796da91ddd;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 54e411d4e56..a67d02a3f96 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -1,6 +1,4 @@
 /*
- * triflex.c
- * 
  * IDE Chipset driver for the Compaq TriFlex IDE controller.
  * 
  * Known to work with the Compaq Workstation 5x00 series.
@@ -30,11 +28,6 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
@@ -43,7 +36,7 @@
 static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct pci_dev *dev = hwif->pci_dev;
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 channel_offset = hwif->channel ? 0x74 : 0x70;
 	u16 timing = 0;
 	u32 triflex_timings = 0;
@@ -81,8 +74,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 		case XFER_PIO_0:
 			timing = 0x0808;
 			break;
-		default:
-			return;
 	}
 
 	triflex_timings &= ~(0xFFFF << (16 * unit));
@@ -96,42 +87,20 @@ static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	triflex_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
-{
-	if (ide_tune_dma(drive))
-		return 0;
-
-	ide_set_max_pio(drive);
-
-	return -1;
-}
-
 static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
 {
 	hwif->set_pio_mode = &triflex_set_pio_mode;
 	hwif->set_dma_mode = &triflex_set_mode;
-
-	if (hwif->dma_base == 0)
-		return;
-
-	hwif->atapi_dma  = 1;
-	hwif->mwdma_mask = 0x07;
-	hwif->swdma_mask = 0x07;
-	hwif->ide_dma_check = &triflex_config_drive_xfer_rate;
-	
-	if (!noautodma)
-		hwif->autodma = 1;
-	hwif->drives[0].autodma = hwif->autodma;
-	hwif->drives[1].autodma = hwif->autodma;
 }
 
-static ide_pci_device_t triflex_device __devinitdata = {
+static const struct ide_port_info triflex_device __devinitdata = {
 	.name		= "TRIFLEX",
 	.init_hwif	= init_hwif_triflex,
-	.autodma	= AUTODMA,
 	.enablebits	= {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
-	.bootable	= ON_BOARD,
+	.host_flags	= IDE_HFLAG_BOOTABLE,
 	.pio_mask	= ATA_PIO4,
+	.swdma_mask	= ATA_SWDMA2,
+	.mwdma_mask	= ATA_MWDMA2,
 };
 
 static int __devinit triflex_init_one(struct pci_dev *dev, 
@@ -140,9 +109,8 @@ static int __devinit triflex_init_one(struct pci_dev *dev,
 	return ide_setup_pci_device(dev, &triflex_device);
 }
 
-static struct pci_device_id triflex_pci_tbl[] = {
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+static const struct pci_device_id triflex_pci_tbl[] = {
+	{ PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);