X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmessage%2Ffusion%2Fmptbase.c;h=083acfd91d8bff0dad61188a8195c7b8aa1893e2;hb=4935361766cc73949fe032cd157d314f288922ba;hp=051b7c5b8f03a6da69bef8edde3488f841638b46;hpb=79acbb3ff2d8095b692e1502b9eb2ccec348de26;p=linux-2.6-omap-h63xx.git diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 051b7c5b8f0..083acfd91d8 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -5,8 +5,8 @@ * For use with LSI Logic PCI chip/adapter(s) * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Copyright (c) 1999-2005 LSI Logic Corporation - * (mailto:mpt_linux_developer@lsil.com) + * Copyright (c) 1999-2007 LSI Logic Corporation + * (mailto:mpt_linux_developer@lsi.com) * */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -73,6 +73,7 @@ MODULE_AUTHOR(MODULEAUTHOR); MODULE_DESCRIPTION(my_NAME); MODULE_LICENSE("GPL"); +MODULE_VERSION(my_VERSION); /* * cmd line parameters @@ -81,6 +82,10 @@ static int mpt_msi_enable; module_param(mpt_msi_enable, int, 0); MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)"); +static int mpt_channel_mapping; +module_param(mpt_channel_mapping, int, 0); +MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); + #ifdef MFCNT static int mfcounter = 0; #define PRINT_MF_COUNT 20000 @@ -172,11 +177,14 @@ static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); //int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers); -static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); +#ifdef MPT_DEBUG_REPLY +static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); +#endif static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info); static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); +static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); /* module entry point */ static int __init fusion_init (void); @@ -318,13 +326,11 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) else if (ioc->bus_type == SAS) mpt_sas_log_info(ioc, log_info); } - if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SPI && - cb_idx != mpt_stm_index && - cb_idx != mpt_lan_index) - mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); - } +#ifdef MPT_DEBUG_REPLY + if (ioc_stat & MPI_IOCSTATUS_MASK) + mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); +#endif /* Check for (valid) IO callback! */ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || @@ -347,7 +353,7 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. * @irq: irq number (not used) * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure @@ -387,14 +393,16 @@ mpt_interrupt(int irq, void *bus_id) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_base_reply - MPT base driver's callback routine; all base driver - * "internal" request/reply processing is routed here. - * Currently used for EventNotification and EventAck handling. +/** + * mpt_base_reply - MPT base driver's callback routine * @ioc: Pointer to MPT_ADAPTER structure * @mf: Pointer to original MPT request frame * @reply: Pointer to MPT reply frame (NULL if TurboReply) * + * MPT base driver's callback routine; all base driver + * "internal" request/reply processing is routed here. + * Currently used for EventNotification and EventAck handling. + * * Returns 1 indicating original alloc'd request frame ptr * should be freed, or 0 if it shouldn't. */ @@ -530,7 +538,7 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) * * This routine is called by a protocol-specific driver (SCSI host, - * LAN, SCSI target) to register it's reply callback routine. Each + * LAN, SCSI target) to register its reply callback routine. Each * protocol-specific driver must do this before it will be able to * use any IOC resources, such as obtaining request frames. * @@ -572,7 +580,7 @@ mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass) * mpt_deregister - Deregister a protocol drivers resources. * @cb_idx: previously registered callback handle * - * Each protocol-specific driver should call this routine when it's + * Each protocol-specific driver should call this routine when its * module is unloaded. */ void @@ -617,7 +625,7 @@ mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc) * * Each protocol-specific driver should call this routine * when it does not (or can no longer) handle events, - * or when it's module is unloaded. + * or when its module is unloaded. */ void mpt_event_deregister(int cb_idx) @@ -656,7 +664,7 @@ mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func) * * Each protocol-specific driver should call this routine * when it does not (or can no longer) handle IOC reset handling, - * or when it's module is unloaded. + * or when its module is unloaded. */ void mpt_reset_deregister(int cb_idx) @@ -670,6 +678,8 @@ mpt_reset_deregister(int cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_device_driver_register - Register device driver hooks + * @dd_cbfunc: driver callbacks struct + * @cb_idx: MPT protocol driver index */ int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) @@ -696,6 +706,7 @@ mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_device_driver_deregister - DeRegister device driver hooks + * @cb_idx: MPT protocol driver index */ void mpt_device_driver_deregister(int cb_idx) @@ -887,8 +898,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_send_handshake_request - Send MPT request via doorbell - * handshake method. + * mpt_send_handshake_request - Send MPT request via doorbell handshake method. * @handle: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @reqBytes: Size of the request in bytes @@ -906,7 +916,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) int mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) { - int r = 0; + int r = 0; u8 *req_as_bytes; int ii; @@ -981,10 +991,13 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_host_page_access_control - provides mechanism for the host - * driver to control the IOC's Host Page Buffer access. + * mpt_host_page_access_control - control the IOC's Host Page Buffer access * @ioc: Pointer to MPT adapter structure * @access_control_value: define bits below + * @sleepFlag: Specifies whether the process can sleep + * + * Provides mechanism for the host driver to control the IOC's + * Host Page Buffer access. * * Access Control Value - bits[15:12] * 0h Reserved @@ -1022,10 +1035,10 @@ mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int slee /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_host_page_alloc - allocate system memory for the fw - * If we already allocated memory in past, then resend the same pointer. - * ioc@: Pointer to pointer to IOC adapter - * ioc_init@: Pointer to ioc init config page + * @ioc: Pointer to pointer to IOC adapter + * @ioc_init: Pointer to ioc init config page * + * If we already allocated memory in past, then resend the same pointer. * Returns 0 for success, non-zero for failure. */ static int @@ -1091,12 +1104,15 @@ return 0; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_verify_adapter - Given a unique IOC identifier, set pointer to - * the associated MPT adapter structure. + * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. * @iocid: IOC unique identifier (integer) * @iocpp: Pointer to pointer to IOC adapter * - * Returns iocid and sets iocpp. + * Given a unique IOC identifier, set pointer to the associated MPT + * adapter structure. + * + * Returns iocid and sets iocpp if iocid is found. + * Returns -1 if iocid is not found. */ int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) @@ -1115,9 +1131,10 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_attach - Install a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure + * @id: PCI device ID information * * This routine performs all the steps necessary to bring the IOC of * a MPT adapter to a OPERATIONAL state. This includes registering @@ -1417,10 +1434,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_detach - Remove a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure - * */ void @@ -1466,10 +1482,10 @@ mpt_detach(struct pci_dev *pdev) */ #ifdef CONFIG_PM /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_suspend - Fusion MPT base driver suspend routine. - * - * + * @pdev: Pointer to pci_dev structure + * @state: new state to enter */ int mpt_suspend(struct pci_dev *pdev, pm_message_t state) @@ -1505,10 +1521,9 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_resume - Fusion MPT base driver resume routine. - * - * + * @pdev: Pointer to pci_dev structure */ int mpt_resume(struct pci_dev *pdev) @@ -1566,7 +1581,7 @@ mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_do_ioc_recovery - Initialize or recover MPT adapter. * @ioc: Pointer to MPT adapter structure * @reason: Event word / reason @@ -1801,6 +1816,13 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) * and we try GetLanConfigPages again... */ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { + + /* + * Initalize link list for inactive raid volumes. + */ + init_MUTEX(&ioc->raid_data.inactive_list_mutex); + INIT_LIST_HEAD(&ioc->raid_data.inactive_list); + if (ioc->bus_type == SAS) { /* clear persistency table */ @@ -1892,13 +1914,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_detect_bound_ports - Search for PCI bus/dev_function - * which matches PCI bus/dev_function (+/-1) for newly discovered 929, - * 929X, 1030 or 1035. +/** + * mpt_detect_bound_ports - Search for matching PCI bus/dev_function * @ioc: Pointer to MPT adapter structure * @pdev: Pointer to (struct pci_dev) structure * + * Search for PCI bus/dev_function which matches + * PCI bus/dev_function (+/-1) for newly discovered 929, + * 929X, 1030 or 1035. + * * If match on PCI dev_function +/-1 is found, bind the two MPT adapters * using alt_ioc pointer fields in their %MPT_ADAPTER structures. */ @@ -1945,9 +1969,9 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_adapter_disable - Disable misbehaving MPT adapter. - * @this: Pointer to MPT adapter structure + * @ioc: Pointer to MPT adapter structure */ static void mpt_adapter_disable(MPT_ADAPTER *ioc) @@ -2005,6 +2029,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } kfree(ioc->spi_data.nvram); + mpt_inactive_raid_list_free(ioc); + kfree(ioc->raid_data.pIocPg2); kfree(ioc->raid_data.pIocPg3); ioc->spi_data.nvram = NULL; ioc->raid_data.pIocPg3 = NULL; @@ -2046,9 +2072,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_adapter_dispose - Free all resources associated with a MPT - * adapter. +/** + * mpt_adapter_dispose - Free all resources associated with an MPT adapter * @ioc: Pointer to MPT adapter structure * * This routine unregisters h/w resources and frees all alloc'd memory @@ -2099,8 +2124,8 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * MptDisplayIocCapabilities - Disply IOC's capacilities. +/** + * MptDisplayIocCapabilities - Disply IOC's capabilities. * @ioc: Pointer to MPT adapter structure */ static void @@ -2142,7 +2167,7 @@ MptDisplayIocCapabilities(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * MakeIocReady - Get IOC to a READY state, using KickStart if needed. * @ioc: Pointer to MPT_ADAPTER structure * @force: Force hard KickStart of IOC @@ -2279,7 +2304,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_GetIocState - Get the current state of a MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @cooked: Request raw or cooked IOC state @@ -2304,7 +2329,7 @@ mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetIocFacts - Send IOCFacts request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2402,6 +2427,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); facts->ProductID = le16_to_cpu(facts->ProductID); + if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) + > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) + ioc->ir_firmware = 1; facts->CurrentHostMfaHighAddr = le32_to_cpu(facts->CurrentHostMfaHighAddr); facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); @@ -2478,7 +2506,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetPortFacts - Send PortFacts request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: Port number @@ -2494,6 +2522,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) int ii; int req_sz; int reply_sz; + int max_id; /* IOC *must* NOT be in RESET state! */ if (ioc->last_state == MPI_IOC_STATE_RESET) { @@ -2541,11 +2570,26 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); + max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : + pfacts->MaxDevices; + ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; + ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; + + /* + * Place all the devices on channels + * + * (for debuging) + */ + if (mpt_channel_mapping) { + ioc->devices_per_bus = 1; + ioc->number_of_buses = (max_id > 255) ? 255 : max_id; + } + return 0; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendIocInit - Send IOCInit request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2581,13 +2625,8 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n", ioc->name, ioc->upload_fw, ioc->facts.Flags)); - if(ioc->bus_type == SAS) - ioc_init.MaxDevices = ioc->facts.MaxDevices; - else if(ioc->bus_type == FC) - ioc_init.MaxDevices = MPT_MAX_FC_DEVICES; - else - ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES; - ioc_init.MaxBuses = MPT_MAX_BUS; + ioc_init.MaxDevices = (U8)ioc->devices_per_bus; + ioc_init.MaxBuses = (U8)ioc->number_of_buses; dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n", ioc->name, ioc->facts.MsgVersion)); if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { @@ -2630,7 +2669,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) } /* No need to byte swap the multibyte fields in the reply - * since we don't even look at it's contents. + * since we don't even look at its contents. */ dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n", @@ -2672,7 +2711,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendPortEnable - Send PortEnable request to MPT adapter port. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: Port number to enable @@ -2709,9 +2748,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) /* RAID FW may take a long time to enable */ - if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) - > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) || - (ioc->bus_type == SAS)) { + if (ioc->ir_firmware || ioc->bus_type == SAS) { rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag); @@ -2723,9 +2760,13 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) return rc; } -/* - * ioc: Pointer to MPT_ADAPTER structure - * size - total FW bytes +/** + * mpt_alloc_fw_memory - allocate firmware memory + * @ioc: Pointer to MPT_ADAPTER structure + * @size: total FW bytes + * + * If memory has already been allocated, the same (cached) value + * is returned. */ void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) @@ -2742,9 +2783,12 @@ mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) ioc->alloc_total += size; } } -/* - * If alt_img is NULL, delete from ioc structure. - * Else, delete a secondary image in same format. +/** + * mpt_free_fw_memory - free firmware memory + * @ioc: Pointer to MPT_ADAPTER structure + * + * If alt_img is NULL, delete from ioc structure. + * Else, delete a secondary image in same format. */ void mpt_free_fw_memory(MPT_ADAPTER *ioc) @@ -2763,7 +2807,7 @@ mpt_free_fw_memory(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2865,10 +2909,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_downloadboot - DownloadBoot code * @ioc: Pointer to MPT_ADAPTER structure - * @flag: Specify which part of IOC memory is to be uploaded. + * @pFwHeader: Pointer to firmware header info * @sleepFlag: Specifies whether the process can sleep * * FwDownloadBoot requires Programmed IO access. @@ -3071,7 +3115,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * KickStart - Perform hard reset of MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @force: Force hard reset @@ -3145,12 +3189,12 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_diag_reset - Perform hard reset of the adapter. * @ioc: Pointer to MPT_ADAPTER structure * @ignore: Set if to honor and clear to ignore * the reset history bit - * @sleepflag: CAN_SLEEP if called in a non-interrupt thread, + * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, * else set to NO_SLEEP (use mdelay instead) * * This routine places the adapter in diagnostic mode via the @@ -3175,6 +3219,9 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) u32 diag1val = 0; #endif + /* Clear any existing interrupts */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " "address=%p\n", ioc->name, __FUNCTION__, @@ -3194,7 +3241,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) " count=%d\n", ioc->name, doorbell, count)); if (doorbell == MPI_IOC_STATE_READY) { - return 0; + return 1; } /* wait 1 sec */ @@ -3206,9 +3253,6 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) return -1; } - /* Clear any existing interrupts */ - CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); - /* Use "Diagnostic reset" method! (only thing available!) */ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); @@ -3436,11 +3480,12 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendIocReset - Send IOCReset request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @reset_type: reset type, expected values are * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET + * @sleepFlag: Specifies whether the process can sleep * * Send IOCReset request to the MPT adapter. * @@ -3494,11 +3539,12 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * initChainBuffers - Allocate memory for and initialize - * chain buffers, chain buffer control arrays and spinlock. - * @hd: Pointer to MPT_SCSI_HOST structure - * @init: If set, initialize the spin lock. +/** + * initChainBuffers - Allocate memory for and initialize chain buffers + * @ioc: Pointer to MPT_ADAPTER structure + * + * Allocates memory for and initializes chain buffers, + * chain buffer control arrays and spinlock. */ static int initChainBuffers(MPT_ADAPTER *ioc) @@ -3594,7 +3640,7 @@ initChainBuffers(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * PrimeIocFifos - Initialize IOC request and reply FIFOs. * @ioc: Pointer to MPT_ADAPTER structure * @@ -3891,15 +3937,15 @@ mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit - * in it's IntStatus register. +/** + * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep * * This routine waits (up to ~2 seconds max) for IOC doorbell - * handshake ACKnowledge. + * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS + * bit in its IntStatus register being clear. * * Returns a negative value on failure, else wait loop count. */ @@ -3922,7 +3968,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } } else { while (--cntdn) { - mdelay (1); + udelay (1000); intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) break; @@ -3942,14 +3988,14 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit - * in it's IntStatus register. +/** + * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep * - * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt. + * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt + * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. * * Returns a negative value on failure, else wait loop count. */ @@ -3974,7 +4020,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (intstat & MPI_HIS_DOORBELL_INTERRUPT) break; - mdelay(1); + udelay (1000); count++; } } @@ -3991,8 +4037,8 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellReply - Wait for and capture a IOC handshake reply. +/** + * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep @@ -4077,7 +4123,7 @@ WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetLanConfigPages - Fetch LANConfig pages. * @ioc: Pointer to MPT_ADAPTER structure * @@ -4188,12 +4234,9 @@ GetLanConfigPages(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table +/** + * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table * @ioc: Pointer to MPT_ADAPTER structure - * @sas_address: 64bit SAS Address for operation. - * @target_id: specified target for operation - * @bus: specified bus for operation * @persist_opcode: see below * * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for @@ -4202,7 +4245,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc) * * NOTE: Don't use not this function during interrupt time. * - * Returns: 0 for success, non-zero error + * Returns 0 for success, non-zero error */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -4293,8 +4336,8 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc, if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { - printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n", - ioc->name, disk); + printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", + ioc->name, disk, volume); } else { printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", ioc->name, volume); @@ -4399,7 +4442,7 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc, } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetIoUnitPage2 - Retrieve BIOS version and boot order information. * @ioc: Pointer to MPT_ADAPTER structure * @@ -4457,7 +4500,8 @@ GetIoUnitPage2(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 +/** + * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 * @ioc: Pointer to a Adapter Strucutre * @portnum: IOC port number * @@ -4644,7 +4688,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mpt_readScsiDevicePageHeaders - save version and length of SDP1 +/** + * mpt_readScsiDevicePageHeaders - save version and length of SDP1 * @ioc: Pointer to a Adapter Strucutre * @portnum: IOC port number * @@ -4693,7 +4738,187 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) return 0; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_inactive_raid_list_free + * + * This clears this link list. + * + * @ioc - pointer to per adapter structure + * + **/ +static void +mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) +{ + struct inactive_raid_component_info *component_info, *pNext; + + if (list_empty(&ioc->raid_data.inactive_list)) + return; + + down(&ioc->raid_data.inactive_list_mutex); + list_for_each_entry_safe(component_info, pNext, + &ioc->raid_data.inactive_list, list) { + list_del(&component_info->list); + kfree(component_info); + } + up(&ioc->raid_data.inactive_list_mutex); +} + +/** + * mpt_inactive_raid_volumes + * + * This sets up link list of phy_disk_nums for devices belonging in an inactive volume + * + * @ioc - pointer to per adapter structure + * @channel - volume channel + * @id - volume target id + * + * + **/ +static void +mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) +{ + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + dma_addr_t dma_handle; + pRaidVolumePage0_t buffer = NULL; + int i; + RaidPhysDiskPage0_t phys_disk; + struct inactive_raid_component_info *component_info; + int handle_inactive_volumes; + + memset(&cfg, 0 , sizeof(CONFIGPARMS)); + memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); + hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; + cfg.pageAddr = (channel << 8) + id; + cfg.cfghdr.hdr = &hdr; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + + if (mpt_config(ioc, &cfg) != 0) + goto out; + + if (!hdr.PageLength) + goto out; + + buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, + &dma_handle); + + if (!buffer) + goto out; + + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if (mpt_config(ioc, &cfg) != 0) + goto out; + + if (!buffer->NumPhysDisks) + goto out; + + handle_inactive_volumes = + (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || + (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || + buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || + buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; + + if (!handle_inactive_volumes) + goto out; + + down(&ioc->raid_data.inactive_list_mutex); + for (i = 0; i < buffer->NumPhysDisks; i++) { + if(mpt_raid_phys_disk_pg0(ioc, + buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) + continue; + + if ((component_info = kmalloc(sizeof (*component_info), + GFP_KERNEL)) == NULL) + continue; + + component_info->volumeID = id; + component_info->volumeBus = channel; + component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; + component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; + component_info->d.PhysDiskID = phys_disk.PhysDiskID; + component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; + + list_add_tail(&component_info->list, + &ioc->raid_data.inactive_list); + } + up(&ioc->raid_data.inactive_list_mutex); + + out: + if (buffer) + pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, + dma_handle); +} + +/** + * mpt_raid_phys_disk_pg0 - returns phys disk page zero + * @ioc: Pointer to a Adapter Structure + * @phys_disk_num: io unit unique phys disk num generated by the ioc + * @phys_disk: requested payload data returned + * + * Return: + * 0 on success + * -EFAULT if read of config page header fails or data pointer not NULL + * -ENOMEM if pci_alloc failed + **/ +int +mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk) +{ + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + dma_addr_t dma_handle; + pRaidPhysDiskPage0_t buffer = NULL; + int rc; + + memset(&cfg, 0 , sizeof(CONFIGPARMS)); + memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); + + hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + + if (mpt_config(ioc, &cfg) != 0) { + rc = -EFAULT; + goto out; + } + + if (!hdr.PageLength) { + rc = -EFAULT; + goto out; + } + + buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, + &dma_handle); + + if (!buffer) { + rc = -ENOMEM; + goto out; + } + + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.pageAddr = phys_disk_num; + + if (mpt_config(ioc, &cfg) != 0) { + rc = -EFAULT; + goto out; + } + + rc = 0; + memcpy(phys_disk, buffer, sizeof(*buffer)); + phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); + + out: + + if (buffer) + pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, + dma_handle); + + return rc; +} + /** * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes * @ioc: Pointer to a Adapter Strucutre @@ -4703,21 +4928,27 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) * 0 on success * -EFAULT if read of config page header fails or data pointer not NULL * -ENOMEM if pci_alloc failed - */ + **/ int mpt_findImVolumes(MPT_ADAPTER *ioc) { IOCPage2_t *pIoc2; u8 *mem; - ConfigPageIoc2RaidVol_t *pIocRv; dma_addr_t ioc2_dma; CONFIGPARMS cfg; ConfigPageHeader_t header; - int jj; int rc = 0; int iocpage2sz; - u8 nVols, nPhys; - u8 vid, vbus, vioc; + int i; + + if (!ioc->ir_firmware) + return 0; + + /* Free the old page + */ + kfree(ioc->raid_data.pIocPg2); + ioc->raid_data.pIocPg2 = NULL; + mpt_inactive_raid_list_free(ioc); /* Read IOCP2 header then the page. */ @@ -4745,55 +4976,23 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; cfg.physAddr = ioc2_dma; if (mpt_config(ioc, &cfg) != 0) - goto done_and_free; + goto out; + + mem = kmalloc(iocpage2sz, GFP_KERNEL); + if (!mem) + goto out; - if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) { - mem = kmalloc(iocpage2sz, GFP_ATOMIC); - if (mem) { - ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; - } else { - goto done_and_free; - } - } memcpy(mem, (u8 *)pIoc2, iocpage2sz); + ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; - /* Identify RAID Volume Id's */ - nVols = pIoc2->NumActiveVolumes; - if ( nVols == 0) { - /* No RAID Volume. - */ - goto done_and_free; - } else { - /* At least 1 RAID Volume - */ - pIocRv = pIoc2->RaidVolume; - ioc->raid_data.isRaid = 0; - for (jj = 0; jj < nVols; jj++, pIocRv++) { - vid = pIocRv->VolumeID; - vbus = pIocRv->VolumeBus; - vioc = pIocRv->VolumeIOC; - - /* find the match - */ - if (vbus == 0) { - ioc->raid_data.isRaid |= (1 << vid); - } else { - /* Error! Always bus 0 - */ - } - } - } + mpt_read_ioc_pg_3(ioc); - /* Identify Hidden Physical Disk Id's */ - nPhys = pIoc2->NumActivePhysDisks; - if (nPhys == 0) { - /* No physical disks. - */ - } else { - mpt_read_ioc_pg_3(ioc); - } + for (i = 0; i < pIoc2->NumActiveVolumes ; i++) + mpt_inactive_raid_volumes(ioc, + pIoc2->RaidVolume[i].VolumeBus, + pIoc2->RaidVolume[i].VolumeID); -done_and_free: + out: pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); return rc; @@ -4846,7 +5045,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) cfg.physAddr = ioc3_dma; cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; if (mpt_config(ioc, &cfg) == 0) { - mem = kmalloc(iocpage3sz, GFP_ATOMIC); + mem = kmalloc(iocpage3sz, GFP_KERNEL); if (mem) { memcpy(mem, (u8 *)pIoc3, iocpage3sz); ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; @@ -4996,9 +5195,8 @@ mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * SendEventNotification - Send EventNotification (on or off) request - * to MPT adapter. +/** + * SendEventNotification - Send EventNotification (on or off) request to adapter * @ioc: Pointer to MPT_ADAPTER structure * @EvSwitch: Event switch flags */ @@ -5062,8 +5260,8 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_config - Generic function to issue config message - * @ioc - Pointer to an adapter structure - * @cfg - Pointer to a configuration structure. Struct contains + * @ioc: Pointer to an adapter structure + * @pCfg: Pointer to a configuration structure. Struct contains * action, page address, direction, physical address * and pointer to a configuration page header * Page header is updated. @@ -5188,8 +5386,8 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_timer_expired - Call back for timer process. +/** + * mpt_timer_expired - Callback for timer process. * Used only internal config functionality. * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long */ @@ -5214,12 +5412,12 @@ mpt_timer_expired(unsigned long data) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_ioc_reset - Base cleanup for hard reset * @ioc: Pointer to the adapter structure * @reset_phase: Indicates pre- or post-reset functionality * - * Remark: Free's resources with internally generated commands. + * Remark: Frees resources with internally generated commands. */ static int mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) @@ -5271,7 +5469,7 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. * * Returns 0 for success, non-zero for failure. @@ -5297,7 +5495,7 @@ procmpt_create(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. * * Returns 0 for success, non-zero for failure. @@ -5311,16 +5509,16 @@ procmpt_destroy(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * procmpt_summary_read - Handle read request from /proc/mpt/summary - * or from /proc/mpt/iocN/summary. +/** + * procmpt_summary_read - Handle read request of a summary file * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * + * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. * Returns number of characters written to process performing the read. */ static int @@ -5355,12 +5553,12 @@ procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eo } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_version_read - Handle read request from /proc/mpt/version. * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * @@ -5411,12 +5609,12 @@ procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eo } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info. * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * @@ -5577,16 +5775,17 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_HardResetHandler - Generic reset handler, issue SCSI Task - * Management call based on input arg values. If TaskMgmt fails, - * return associated SCSI request. + * mpt_HardResetHandler - Generic reset handler * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Indicates if sleep or schedule must be called. * + * Issues SCSI Task Management call based on input arg values. + * If TaskMgmt fails, returns associated SCSI request. + * * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) * or a non-interrupt thread. In the former, must not call schedule(). * - * Remark: A return of -1 is a FATAL error case, as it means a + * Note: A return of -1 is a FATAL error case, as it means a * FW reload/initialization failed. * * Returns 0 for SUCCESS or -1 if FAILED. @@ -5660,8 +5859,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) return rc; } -# define EVENT_DESCR_STR_SZ 100 - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static void EventDescriptionStr(u8 event, u32 evData0, char *evStr) @@ -5689,9 +5886,6 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) break; case MPI_EVENT_RESCAN: ds = "Bus Rescan Event"; - /* Ok, do we need to do anything here? As far as - I can tell, this is when a new device gets added - to the loop. */ break; case MPI_EVENT_LINK_STATUS_CHANGE: if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) @@ -5768,48 +5962,63 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: { u8 id = (u8)(evData0); + u8 channel = (u8)(evData0 >> 8); u8 ReasonCode = (u8)(evData0 >> 16); switch (ReasonCode) { case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Added: id=%d", id); + "SAS Device Status Change: Added: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Deleted: id=%d", id); + "SAS Device Status Change: Deleted: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: SMART Data: id=%d", - id); + "SAS Device Status Change: SMART Data: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: No Persistancy: id=%d", id); + "SAS Device Status Change: No Persistancy: " + "id=%d channel=%d", id, channel); + break; + case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Device Status Change: Unsupported Device " + "Discovered : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Device Reset : id=%d", id); + "SAS Device Status Change: Internal Device " + "Reset : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Task Abort : id=%d", id); + "SAS Device Status Change: Internal Task " + "Abort : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Abort Task Set : id=%d", id); + "SAS Device Status Change: Internal Abort " + "Task Set : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Clear Task Set : id=%d", id); + "SAS Device Status Change: Internal Clear " + "Task Set : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Query Task : id=%d", id); + "SAS Device Status Change: Internal Query " + "Task : id=%d channel=%d", id, channel); break; default: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Unknown: id=%d", id); + "SAS Device Status Change: Unknown: " + "id=%d channel=%d", id, channel); break; } break; @@ -5818,8 +6027,16 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) ds = "Bus Timer Expired"; break; case MPI_EVENT_QUEUE_FULL: - ds = "Queue Full"; + { + u16 curr_depth = (u16)(evData0 >> 16); + u8 channel = (u8)(evData0 >> 8); + u8 id = (u8)(evData0); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "Queue Full: channel=%d id=%d depth=%d", + channel, id, curr_depth); break; + } case MPI_EVENT_SAS_SES: ds = "SAS SES Event"; break; @@ -5923,6 +6140,76 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) ds = "SAS Log Entry Added"; break; + case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: + { + u8 phy_num = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u8 port_width = (u8)(evData0 >> 16); + u8 primative = (u8)(evData0 >> 24); + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Broadcase Primative: phy=%d port=%d " + "width=%d primative=0x%02x", + phy_num, port_num, port_width, primative); + break; + } + + case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + { + u8 reason = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u16 handle = le16_to_cpu(evData0 >> 16); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Initiator Device Status Change: reason=0x%02x " + "port=%d handle=0x%04x", + reason, port_num, handle); + break; + } + + case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: + { + u8 max_init = (u8)(evData0); + u8 current_init = (u8)(evData0 >> 8); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Initiator Device Table Overflow: max initiators=%02d " + "current initators=%02d", + max_init, current_init); + break; + } + case MPI_EVENT_SAS_SMP_ERROR: + { + u8 status = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u8 result = (u8)(evData0 >> 16); + + if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d result=0x%02x", + port_num, result); + else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : CRC Error", + port_num); + else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : Timeout", + port_num); + else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : No Destination", + port_num); + else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : Bad Destination", + port_num); + else + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : status=0x%02x", + port_num, status); + break; + } + /* * MPT base "custom" events may be added here... */ @@ -5935,13 +6222,14 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * ProcessEventNotification - Route a received EventNotificationReply to - * all currently regeistered event handlers. +/** + * ProcessEventNotification - Route EventNotificationReply to all event handlers * @ioc: Pointer to MPT_ADAPTER structure * @pEventReply: Pointer to EventNotification reply frame * @evHandlers: Pointer to integer, number of event handlers * + * Routes a received EventNotificationReply to all currently registered + * event handlers. * Returns sum of event handlers return values. */ static int @@ -6056,7 +6344,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_fc_log_info - Log information returned from Fibre Channel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @log_info: U32 LogInfo reply word from the IOC @@ -6077,7 +6365,7 @@ mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @mr: Pointer to MPT reply frame @@ -6185,10 +6473,11 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) "Abort", /* 12h */ "IO Not Yet Executed", /* 13h */ "IO Executed", /* 14h */ - "Persistent Reservation Out Not Affiliation Owner", /* 15h */ + "Persistent Reservation Out Not Affiliation " + "Owner", /* 15h */ "Open Transmit DMA Abort", /* 16h */ "IO Device Missing Delay Retry", /* 17h */ - NULL, /* 18h */ + "IO Cancelled Due to Recieve Error", /* 18h */ NULL, /* 19h */ NULL, /* 1Ah */ NULL, /* 1Bh */ @@ -6198,15 +6487,105 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) NULL, /* 1Fh */ "Enclosure Management" /* 20h */ }; + static char *ir_code_str[] = { + "Raid Action Error", /* 00h */ + NULL, /* 00h */ + NULL, /* 01h */ + NULL, /* 02h */ + NULL, /* 03h */ + NULL, /* 04h */ + NULL, /* 05h */ + NULL, /* 06h */ + NULL /* 07h */ + }; + static char *raid_sub_code_str[] = { + NULL, /* 00h */ + "Volume Creation Failed: Data Passed too " + "Large", /* 01h */ + "Volume Creation Failed: Duplicate Volumes " + "Attempted", /* 02h */ + "Volume Creation Failed: Max Number " + "Supported Volumes Exceeded", /* 03h */ + "Volume Creation Failed: DMA Error", /* 04h */ + "Volume Creation Failed: Invalid Volume Type", /* 05h */ + "Volume Creation Failed: Error Reading " + "MFG Page 4", /* 06h */ + "Volume Creation Failed: Creating Internal " + "Structures", /* 07h */ + NULL, /* 08h */ + NULL, /* 09h */ + NULL, /* 0Ah */ + NULL, /* 0Bh */ + NULL, /* 0Ch */ + NULL, /* 0Dh */ + NULL, /* 0Eh */ + NULL, /* 0Fh */ + "Activation failed: Already Active Volume", /* 10h */ + "Activation failed: Unsupported Volume Type", /* 11h */ + "Activation failed: Too Many Active Volumes", /* 12h */ + "Activation failed: Volume ID in Use", /* 13h */ + "Activation failed: Reported Failure", /* 14h */ + "Activation failed: Importing a Volume", /* 15h */ + NULL, /* 16h */ + NULL, /* 17h */ + NULL, /* 18h */ + NULL, /* 19h */ + NULL, /* 1Ah */ + NULL, /* 1Bh */ + NULL, /* 1Ch */ + NULL, /* 1Dh */ + NULL, /* 1Eh */ + NULL, /* 1Fh */ + "Phys Disk failed: Too Many Phys Disks", /* 20h */ + "Phys Disk failed: Data Passed too Large", /* 21h */ + "Phys Disk failed: DMA Error", /* 22h */ + "Phys Disk failed: Invalid ", /* 23h */ + "Phys Disk failed: Creating Phys Disk Config " + "Page", /* 24h */ + NULL, /* 25h */ + NULL, /* 26h */ + NULL, /* 27h */ + NULL, /* 28h */ + NULL, /* 29h */ + NULL, /* 2Ah */ + NULL, /* 2Bh */ + NULL, /* 2Ch */ + NULL, /* 2Dh */ + NULL, /* 2Eh */ + NULL, /* 2Fh */ + "Compatibility Error: IR Disabled", /* 30h */ + "Compatibility Error: Inquiry Comand Failed", /* 31h */ + "Compatibility Error: Device not Direct Access " + "Device ", /* 32h */ + "Compatibility Error: Removable Device Found", /* 33h */ + "Compatibility Error: Device SCSI Version not " + "2 or Higher", /* 34h */ + "Compatibility Error: SATA Device, 48 BIT LBA " + "not Supported", /* 35h */ + "Compatibility Error: Device doesn't have " + "512 Byte Block Sizes", /* 36h */ + "Compatibility Error: Volume Type Check Failed", /* 37h */ + "Compatibility Error: Volume Type is " + "Unsupported by FW", /* 38h */ + "Compatibility Error: Disk Drive too Small for " + "use in Volume", /* 39h */ + "Compatibility Error: Phys Disk for Create " + "Volume not Found", /* 3Ah */ + "Compatibility Error: Too Many or too Few " + "Disks for Volume Type", /* 3Bh */ + "Compatibility Error: Disk stripe Sizes " + "Must be 64KB", /* 3Ch */ + "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ + }; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_sas_log_info - Log information returned from SAS IOC. * @ioc: Pointer to MPT_ADAPTER structure * @log_info: U32 LogInfo reply word from the IOC * * Refer to lsi/mpi_log_sas.h. - */ + **/ static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info) { @@ -6220,56 +6599,165 @@ union loginfo_type { }dw; }; union loginfo_type sas_loginfo; + char *originator_desc = NULL; char *code_desc = NULL; + char *sub_code_desc = NULL; sas_loginfo.loginfo = log_info; if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*))) return; - if ((sas_loginfo.dw.originator == 0 /*IOP*/) && - (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) { - code_desc = iop_code_str[sas_loginfo.dw.code]; - }else if ((sas_loginfo.dw.originator == 1 /*PL*/) && - (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) { - code_desc = pl_code_str[sas_loginfo.dw.code]; + + originator_desc = originator_str[sas_loginfo.dw.originator]; + + switch (sas_loginfo.dw.originator) { + + case 0: /* IOP */ + if (sas_loginfo.dw.code < + sizeof(iop_code_str)/sizeof(char*)) + code_desc = iop_code_str[sas_loginfo.dw.code]; + break; + case 1: /* PL */ + if (sas_loginfo.dw.code < + sizeof(pl_code_str)/sizeof(char*)) + code_desc = pl_code_str[sas_loginfo.dw.code]; + break; + case 2: /* IR */ + if (sas_loginfo.dw.code >= + sizeof(ir_code_str)/sizeof(char*)) + break; + code_desc = ir_code_str[sas_loginfo.dw.code]; + if (sas_loginfo.dw.subcode >= + sizeof(raid_sub_code_str)/sizeof(char*)) + break; + if (sas_loginfo.dw.code == 0) + sub_code_desc = + raid_sub_code_str[sas_loginfo.dw.subcode]; + break; + default: + return; } - if (code_desc != NULL) + if (sub_code_desc != NULL) + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code={%s}," + " SubCode={%s}\n", + ioc->name, log_info, originator_desc, code_desc, + sub_code_desc); + else if (code_desc != NULL) printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): Originator={%s}, Code={%s}," " SubCode(0x%04x)\n", - ioc->name, - log_info, - originator_str[sas_loginfo.dw.originator], - code_desc, + ioc->name, log_info, originator_desc, code_desc, sas_loginfo.dw.subcode); else printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," " SubCode(0x%04x)\n", - ioc->name, - log_info, - originator_str[sas_loginfo.dw.originator], - sas_loginfo.dw.code, - sas_loginfo.dw.subcode); + ioc->name, log_info, originator_desc, + sas_loginfo.dw.code, sas_loginfo.dw.subcode); } +#ifdef MPT_DEBUG_REPLY /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. +/** + * mpt_iocstatus_info_config - IOCSTATUS information for config pages + * @ioc: Pointer to MPT_ADAPTER structure + * ioc_status: U32 IOCStatus word from IOC + * @mf: Pointer to MPT request frame + * + * Refer to lsi/mpi.h. + **/ +static void +mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) +{ + Config_t *pReq = (Config_t *)mf; + char extend_desc[EVENT_DESCR_STR_SZ]; + char *desc = NULL; + u32 form; + u8 page_type; + + if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) + page_type = pReq->ExtPageType; + else + page_type = pReq->Header.PageType; + + /* + * ignore invalid page messages for GET_NEXT_HANDLE + */ + form = le32_to_cpu(pReq->PageAddress); + if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { + if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || + page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || + page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { + if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == + MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) + return; + } + if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) + if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == + MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) + return; + } + + snprintf(extend_desc, EVENT_DESCR_STR_SZ, + "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", + page_type, pReq->Header.PageNumber, pReq->Action, form); + + switch (ioc_status) { + + case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ + desc = "Config Page Invalid Action"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ + desc = "Config Page Invalid Type"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ + desc = "Config Page Invalid Page"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ + desc = "Config Page Invalid Data"; + break; + + case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ + desc = "Config Page No Defaults"; + break; + + case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ + desc = "Config Page Can't Commit"; + break; + } + + if (!desc) + return; + + printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n", + ioc->name, ioc_status, desc, extend_desc); +} + +/** + * mpt_iocstatus_info - IOCSTATUS information returned from IOC. * @ioc: Pointer to MPT_ADAPTER structure * @ioc_status: U32 IOCStatus word from IOC * @mf: Pointer to MPT request frame * * Refer to lsi/mpi.h. - */ + **/ static void -mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) +mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) { u32 status = ioc_status & MPI_IOCSTATUS_MASK; char *desc = NULL; switch (status) { + +/****************************************************************************/ +/* Common IOCStatus values for all replies */ +/****************************************************************************/ + case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ desc = "Invalid Function"; break; @@ -6302,84 +6790,180 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) desc = "Invalid State"; break; +/****************************************************************************/ +/* Config IOCStatus values */ +/****************************************************************************/ + case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ - /* No message for Config IOCStatus values */ + mpt_iocstatus_info_config(ioc, status, mf); break; +/****************************************************************************/ +/* SCSIIO Reply (SPI, FCP, SAS) initiator values */ +/* */ +/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ +/* */ +/****************************************************************************/ + case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ - /* No message for recovered error - desc = "SCSI Recovered Error"; - */ + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ + case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ + case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ + case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ + case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ + case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ + case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ + case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ + case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ + case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ + case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ + case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ break; - case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ - desc = "SCSI Invalid Bus"; +/****************************************************************************/ +/* SCSI Target values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ + desc = "Target: Priority IO"; break; - case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ - desc = "SCSI Invalid TargetID"; + case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ + desc = "Target: Invalid Port"; break; - case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ - { - SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; - U8 cdb = pScsiReq->CDB[0]; - if (cdb != 0x12) { /* Inquiry is issued for device scanning */ - desc = "SCSI Device Not There"; - } + case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ + desc = "Target Invalid IO Index:"; break; - } - case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ - desc = "SCSI Data Overrun"; + case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ + desc = "Target: Aborted"; break; - case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ - /* This error is checked in scsi_io_done(). Skip. - desc = "SCSI Data Underrun"; - */ + case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ + desc = "Target: No Conn Retryable"; break; - case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ - desc = "SCSI I/O Data Error"; + case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ + desc = "Target: No Connection"; break; - case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ - desc = "SCSI Protocol Error"; + case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ + desc = "Target: Transfer Count Mismatch"; break; - case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ - desc = "SCSI Task Terminated"; + case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ + desc = "Target: STS Data not Sent"; break; - case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ - desc = "SCSI Residual Mismatch"; + case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ + desc = "Target: Data Offset Error"; break; - case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ - desc = "SCSI Task Management Failed"; + case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ + desc = "Target: Too Much Write Data"; break; - case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ - desc = "SCSI IOC Terminated"; + case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ + desc = "Target: IU Too Short"; break; - case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ - desc = "SCSI Ext Terminated"; + case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ + desc = "Target: ACK NAK Timeout"; + break; + + case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ + desc = "Target: Nak Received"; + break; + +/****************************************************************************/ +/* Fibre Channel Direct Access values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ + desc = "FC: Aborted"; + break; + + case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ + desc = "FC: RX ID Invalid"; + break; + + case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ + desc = "FC: DID Invalid"; + break; + + case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ + desc = "FC: Node Logged Out"; + break; + + case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ + desc = "FC: Exchange Canceled"; + break; + +/****************************************************************************/ +/* LAN values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ + desc = "LAN: Device not Found"; + break; + + case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ + desc = "LAN: Device Failure"; + break; + + case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ + desc = "LAN: Transmit Error"; + break; + + case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ + desc = "LAN: Transmit Aborted"; + break; + + case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ + desc = "LAN: Receive Error"; + break; + + case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ + desc = "LAN: Receive Aborted"; + break; + + case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ + desc = "LAN: Partial Packet"; + break; + + case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ + desc = "LAN: Canceled"; + break; + +/****************************************************************************/ +/* Serial Attached SCSI values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ + desc = "SAS: SMP Request Failed"; + break; + + case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ + desc = "SAS: SMP Data Overrun"; break; default: desc = "Others"; break; } - if (desc != NULL) - printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc); + + if (!desc) + return; + + printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s\n", ioc->name, status, desc); } +#endif /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ EXPORT_SYMBOL(mpt_attach); @@ -6414,9 +6998,10 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); +EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * fusion_init - Fusion MPT base driver initialization routine. * * Returns 0 for success, non-zero for failure. @@ -6456,7 +7041,7 @@ fusion_init(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * fusion_exit - Perform driver unload cleanup. * * This routine frees all resources associated with each MPT adapter