X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2FKconfig;h=2d0ebad55a4951f440330a68367560a8153b207f;hb=3d12c0c75db0cd85beb11c4e2d86a49cabe3cfff;hp=1fc4c134d9391f685eb1880ca90082d96cd30725;hpb=eedb9f09e92598c165de37a8c210434d270ca3a6;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1fc4c134d93..2d0ebad55a4 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -49,12 +49,24 @@ config MTD_NAND_SPIA
 	help
 	  If you had to ask, you don't have one. Say 'N'.
 
+config MTD_NAND_AMS_DELTA
+	tristate "NAND Flash device on Amstrad E3"
+	depends on MACH_AMS_DELTA && MTD_NAND
+	help
+	  Support for NAND flash on Amstrad E3 (Delta).
+
 config MTD_NAND_TOTO
 	tristate "NAND Flash device on TOTO board"
 	depends on ARCH_OMAP && MTD_NAND
 	help
 	  Support for NAND flash on Texas Instruments Toto platform.
 
+config MTD_NAND_TS7250
+	tristate "NAND Flash device on TS-7250 board"
+	depends on MACH_TS72XX && MTD_NAND
+	help
+	  Support for NAND flash on Technologic Systems TS-7250 platform.
+
 config MTD_NAND_IDS
 	tristate
 
@@ -87,7 +99,7 @@ config MTD_NAND_S3C2410
 	  This enables the NAND flash controller on the S3C2410 and S3C2440
 	  SoCs
 
-	  No board specfic support is done by this driver, each board
+	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
@@ -178,17 +190,29 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
 	  Even if you leave this disabled, you can enable BBT writes at module
 	  load time (assuming you build diskonchip as a module) with the module
 	  parameter "inftl_bbt_write=1".
-	  
- config MTD_NAND_SHARPSL
- 	bool "Support for NAND Flash on Sharp SL Series (C7xx + others)"
- 	depends on MTD_NAND && ARCH_PXA
- 
- config MTD_NAND_NANDSIM
- 	bool "Support for NAND Flash Simulator"
- 	depends on MTD_NAND && MTD_PARTITIONS
 
+config MTD_NAND_SHARPSL
+	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+	depends on MTD_NAND && ARCH_PXA
+
+config MTD_NAND_CS553X
+	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+	depends on MTD_NAND && X86_PC && PCI
 	help
-	  The simulator may simulate verious NAND flash chips for the
+	  The CS553x companion chips for the AMD Geode processor
+	  include NAND flash controllers with built-in hardware ECC
+	  capabilities; enabling this option will allow you to use
+	  these. The driver will check the MSRs to verify that the
+	  controller is enabled for NAND, and currently requires that
+	  the controller be in MMIO mode.
+
+	  If you say "m", the module will be called "cs553x_nand.ko".
+
+config MTD_NAND_NANDSIM
+	tristate "Support for NAND Flash Simulator"
+	depends on MTD_NAND && MTD_PARTITIONS
+	help
+	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
- 
+
 endmenu