X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2Fbf5xx_nand.c;h=e87a57297328c4a72cde3d01c605e94d0299eee3;hb=3988ba0708e98b4bafc9034aa476775520bee708;hp=7d6ac6a7d9a7c3409ccec3ccc9c6f956b3d8aeec;hpb=6208e77e7fa9e69f399fddc55b1cf9527fbde599;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 7d6ac6a7d9a..e87a5729732 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -1,10 +1,10 @@
 /* linux/drivers/mtd/nand/bf5xx_nand.c
  *
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
  *	http://blackfin.uclinux.org/
  *	Bryan Wu <bryan.wu@analog.com>
  *
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
  *
  * Derived from drivers/mtd/nand/s3c2410.c
  * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
@@ -74,7 +74,7 @@ static int hardware_ecc = 1;
 static int hardware_ecc;
 #endif
 
-static unsigned short bfin_nfc_pin_req[] =
+static const unsigned short bfin_nfc_pin_req[] =
 	{P_NAND_CE,
 	 P_NAND_RB,
 	 P_NAND_D0,
@@ -581,12 +581,6 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
 	bfin_write_NFC_IRQSTAT(val);
 	SSYNC();
 
-	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME
-		": Requesting Peripherals failed\n");
-		return -EFAULT;
-	}
-
 	/* DMA initialization  */
 	if (bf5xx_nand_dma_init(info))
 		err = -ENXIO;
@@ -654,6 +648,12 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "(%p)\n", pdev);
 
+	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+		printk(KERN_ERR DRV_NAME
+		": Requesting Peripherals failed\n");
+		return -EFAULT;
+	}
+
 	if (!plat) {
 		dev_err(&pdev->dev, "no platform specific information\n");
 		goto exit_error;
@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(DRV_AUTHOR);
 MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);