X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2F3c527.c;h=b61073c42bf8641b1623243e5fa30d19299b79aa;hb=aa4abc9bcce0d2a7ec189e897f8f8c58ca04643b;hp=2df3af3b9b20130ead927f93db05730029430d9c;hpb=eb14f019597cd86c21a6c601d7e900f40030c2e7;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 2df3af3b9b2..b61073c42bf 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -288,6 +288,18 @@ struct net_device *__init mc32_probe(int unit)
 	return ERR_PTR(-ENODEV);
 }
 
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= mc32_open,
+	.ndo_stop		= mc32_close,
+	.ndo_start_xmit		= mc32_send_packet,
+	.ndo_get_stats		= mc32_get_stats,
+	.ndo_set_multicast_list = mc32_set_multicast_list,
+	.ndo_tx_timeout		= mc32_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /**
  * mc32_probe1	-	Check a given slot for a board and test the card
  * @dev:  Device structure to fill in
@@ -518,12 +530,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
 		dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
 
-	dev->open		= mc32_open;
-	dev->stop		= mc32_close;
-	dev->hard_start_xmit	= mc32_send_packet;
-	dev->get_stats		= mc32_get_stats;
-	dev->set_multicast_list = mc32_set_multicast_list;
-	dev->tx_timeout		= mc32_timeout;
+	dev->netdev_ops		= &netdev_ops;
 	dev->watchdog_timeo	= HZ*5;	/* Board does all the work */
 	dev->ethtool_ops	= &netdev_ethtool_ops;