X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2F8139too.c;h=cd9718512d1c548e293f77b900b69b702f6b8572;hb=18ac544306855aa366d34d29755f4596acd7a58d;hp=abd6261465f16e2692c45033ab81e3263dc6716e;hpb=789e7dc8ee6cfb7928208b077d0799d81196e9bb;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index abd6261465f..cd9718512d1 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -93,7 +93,6 @@
 #define DRV_VERSION	"0.9.27"
 
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/compiler.h>
@@ -769,7 +768,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* dev and priv zeroed in alloc_etherdev */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (dev == NULL) {
-		printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev));
+		dev_err(&pdev->dev, "Unable to alloc new net device\n");
 		return -ENOMEM;
 	}
 	SET_MODULE_OWNER(dev);
@@ -801,31 +800,31 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 #ifdef USE_IO_OPS
 	/* make sure PCI base addr 0 is PIO */
 	if (!(pio_flags & IORESOURCE_IO)) {
-		printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	/* check for weird/broken PCI region reporting */
 	if (pio_len < RTL_MIN_IO_SIZE) {
-		printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 #else
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(mmio_flags & IORESOURCE_MEM)) {
-		printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 	if (mmio_len < RTL_MIN_IO_SIZE) {
-		printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out;
 	}
 #endif
 
-	rc = pci_request_regions (pdev, "8139too");
+	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
 		goto err_out;
 	disable_dev_on_err = 1;
@@ -836,7 +835,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 #ifdef USE_IO_OPS
 	ioaddr = ioport_map(pio_start, pio_len);
 	if (!ioaddr) {
-		printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "cannot map PIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -847,7 +846,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* ioremap MMIO region */
 	ioaddr = pci_iomap(pdev, 1, 0);
 	if (ioaddr == NULL) {
-		printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
+		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -861,8 +860,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 
 	/* check for missing/broken hardware */
 	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
-		printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n",
-			pci_name(pdev));
+		dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
 		rc = -EIO;
 		goto err_out;
 	}
@@ -876,9 +874,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n",
-		pci_name(pdev));
-	printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig));
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "unknown chip version, assuming RTL-8139\n");
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
 	tp->chipset = 0;
 
 match:
@@ -955,9 +954,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
-		printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
-		       pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
-		printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n");
+		dev_info(&pdev->dev,
+			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+		       	   pdev->vendor, pdev->device, pci_rev);
+		dev_info(&pdev->dev,
+			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
 	i = rtl8139_init_board (pdev, &dev);
@@ -1311,7 +1312,7 @@ static int rtl8139_open (struct net_device *dev)
 	int retval;
 	void __iomem *ioaddr = tp->mmio_addr;
 
-	retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
+	retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
 	if (retval)
 		return retval;
 
@@ -1341,9 +1342,9 @@ static int rtl8139_open (struct net_device *dev)
 	netif_start_queue (dev);
 
 	if (netif_msg_ifup(tp))
-		printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#lx IRQ %d"
-			" GP Pins %2.2x %s-duplex.\n",
-			dev->name, pci_resource_start (tp->pci_dev, 1),
+		printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+			" GP Pins %2.2x %s-duplex.\n", dev->name,
+			(unsigned long long)pci_resource_start (tp->pci_dev, 1),
 			dev->irq, RTL_R8 (MediaStatus),
 			tp->mii.full_duplex ? "full" : "half");