X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=39189903e35579f921d51e8365f55dc43a22f809;hb=065a3e17baa36d1d48eb7376138820035b44775e;hp=e20b849a22e8e59a4f3fb06304b1f190d840c050;hpb=2e9abdd9bad485970b37cd53a82f92702054984c;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e20b849a22e..39189903e35 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -447,6 +447,7 @@ config MIPS_GT96100ETH
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
 	depends on NET_ETHERNET && SOC_AU1X00
+	select PHYLIB
 	select CRC32
 	help
 	  If you have an Alchemy Semi AU1X00 based system
@@ -853,6 +854,17 @@ config SMC9194
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc9194.
 
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on NET_ETHERNET && ARCH_NETX
+	help
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called netx-eth.
+
 config DM9000
 	tristate "DM9000 support"
 	depends on (ARM || MIPS) && NET_ETHERNET
@@ -865,6 +877,22 @@ config DM9000
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called dm9000.
 
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on NET_ETHERNET && ARCH_PXA
+	help
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel, 
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be 
+	  called smc911x.  If you want to compile it as a module, say M 
+	  here and read <file:Documentation/modules.txt>
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on NET_ETHERNET && ISA
@@ -1359,8 +1387,8 @@ config APRICOT
 	  called apricot.
 
 config B44
-	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
+	tristate "Broadcom 4400 ethernet support"
+	depends on NET_PCI && PCI
 	select MII
 	help
 	  If you have a network (Ethernet) controller of this type, say Y and
@@ -2163,6 +2191,8 @@ config TIGON3
 config BNX2
 	tristate "Broadcom NetXtremeII support"
 	depends on PCI
+	select CRC32
+	select ZLIB_INFLATE
 	help
 	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
 
@@ -2171,7 +2201,7 @@ config BNX2
 
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
-	depends on PCI && PPC_CELL
+	depends on PCI && PPC_IBM_CELL_BLADE
 	select FW_LOADER
 	help
 	  This driver supports the Gigabit Ethernet chips present on the
@@ -2179,11 +2209,11 @@ config SPIDER_NET
 
 config GIANFAR
 	tristate "Gianfar Ethernet"
-	depends on 85xx || 83xx
+	depends on 85xx || 83xx || PPC_86xx
 	select PHYLIB
 	help
-	  This driver supports the Gigabit TSEC on the MPC85xx 
-	  family of chips, and the FEC on the 8540
+	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+	  and MPC86xx family of chips, and the FEC on the 8540.
 
 config GFAR_NAPI
 	bool "NAPI Support"
@@ -2311,15 +2341,30 @@ config S2IO_NAPI
 
 	  If in doubt, say N.
 
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/Myri-10G/>
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called myri10ge.
+
 endmenu
 
-if !UML
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
 
 source "drivers/net/pcmcia/Kconfig"
-endif
 
 source "drivers/net/wan/Kconfig"