X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=75f9f7f2fbed73bd56b384b0b7c1dd07b09b6442;hb=c3056065400aeb437390e1a86b85f9c32fb1c1df;hp=0b71ebc074b68cc1bd90c50b185e8d6a0eb74956;hpb=3e5cce627cfaa35410ab77c50641c52b7096d3b5;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0b71ebc074b..75f9f7f2fbe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -61,6 +61,7 @@ config DUMMY
 config BONDING
 	tristate "Bonding driver support"
 	depends on INET
+	depends on IPV6 || IPV6=n
 	---help---
 	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
 	  Channels together. This is called 'Etherchannel' by Cisco,
@@ -894,7 +895,7 @@ config SMC91X
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		SOC_AU1X00 || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -966,7 +967,7 @@ config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA || SUPERH
+	depends on ARM || SUPERH
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -978,6 +979,20 @@ config SMC911X
 	  called smc911x.  If you want to compile it as a module, say M 
 	  here and read <file:Documentation/kbuild/modules.txt>
 
+config SMSC911X
+	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+	depends on ARM || SUPERH
+	select CRC32
+	select MII
+	select PHYLIB
+	---help---
+	  Say Y here if you want support for SMSC LAN911x and LAN921x families
+	  of ethernet controllers.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smsc911x.
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on ISA
@@ -1414,19 +1429,6 @@ config TC35815
 	depends on NET_PCI && PCI && MIPS
 	select PHYLIB
 
-config EEPRO100
-	tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
-	depends on NET_PCI && PCI
-	select MII
-	help
-	  If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
-	  card, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eepro100.
-
-
 config E100
 	tristate "Intel(R) PRO/100+ support"
 	depends on NET_PCI && PCI
@@ -1980,10 +1982,10 @@ config IP1000
 	  will be called ipg.  This is recommended.
 
 config IGB
-       tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support"
+       tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
        depends on PCI
        ---help---
-         This driver supports Intel(R) 82575 gigabit ethernet family of
+         This driver supports Intel(R) 82575/82576 gigabit ethernet family of
          adapters.  For more information on how to identify your adapter, go
          to the Adapter & Driver ID Guide at:
 
@@ -2009,6 +2011,15 @@ config IGB_LRO
 
 	  If in doubt, say N.
 
+config IGB_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on IGB && DCA && !(IGB=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2432,9 +2443,23 @@ config IXGBE
 	  will be called ixgbe.
 
 config IXGBE_DCA
-	bool
+	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+	bool "Data Center Bridging (DCB) Support"
+	default n
+	depends on IXGBE && DCB
+	---help---
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+
+	  If unsure, say N.
 
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
@@ -2484,9 +2509,13 @@ config MYRI10GE
 	  will be called myri10ge.
 
 config MYRI10GE_DCA
-	bool
+	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
 
 config NETXEN_NIC
 	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"