X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fhp100.c;h=571dd80fb85009910f6a49d3cda27baa085b54f1;hb=f7160c7573615ec82c691e294cf80d920b5d588d;hp=8caa591c56494f486461dd831a152bf09d229bb1;hpb=ec4883b015c3212f6f6d04fb2ff45f528492f598;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8caa591c564..571dd80fb85 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -8,7 +8,7 @@
 ** Extended for new busmaster capable chipsets by
 ** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
 **
-** Maintained by: Jaroslav Kysela <perex@suse.cz>
+** Maintained by: Jaroslav Kysela <perex@perex.cz>
 **
 ** This driver has only been tested with
 ** -- HP J2585B 10/100 Mbit/s PCI Busmaster
@@ -404,8 +404,6 @@ struct net_device * __init hp100_probe(int unit)
 	if (!dev)
 		return ERR_PTR(-ENODEV);
 
-	SET_MODULE_OWNER(dev);
-
 #ifdef HP100_DEBUG_B
 	hp100_outw(0x4200, TRACE);
 	printk("hp100: %s: probe\n", dev->name);
@@ -1155,7 +1153,7 @@ static void hp100_init_pdls(struct net_device *dev)
 	printk("hp100: %s: init pdls\n", dev->name);
 #endif
 
-	if (0 == lp->page_vaddr_algn)
+	if (!lp->page_vaddr_algn)
 		printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name);
 	else {
 		/* pageptr shall point into the DMA accessible memory region  */
@@ -2095,9 +2093,9 @@ static void hp100_set_multicast_list(struct net_device *dev)
 				addrs = dmi->dmi_addr;
 				if ((*addrs & 0x01) == 0x01) {	/* multicast address? */
 #ifdef HP100_DEBUG
-					printk("hp100: %s: multicast = %02x:%02x:%02x:%02x:%02x:%02x, ",
-						     dev->name, addrs[0], addrs[1], addrs[2],
-						     addrs[3], addrs[4], addrs[5]);
+					DECLARE_MAC_BUF(mac);
+					printk("hp100: %s: multicast = %s, ",
+						     dev->name, print_mac(mac, addrs));
 #endif
 					for (j = idx = 0; j < 6; j++) {
 						idx ^= *addrs++ & 0x3f;
@@ -2843,7 +2841,6 @@ static int __init hp100_eisa_probe (struct device *gendev)
 	if (!dev)
 		return -ENOMEM;
 
-	SET_MODULE_OWNER(dev);
 	SET_NETDEV_DEV(dev, &edev->dev);
 
 	err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
@@ -2896,7 +2893,6 @@ static int __devinit hp100_pci_probe (struct pci_dev *pdev,
 		goto out0;
 	}
 
-	SET_MODULE_OWNER(dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
@@ -2955,7 +2951,7 @@ static struct pci_driver hp100_pci_driver = {
  */
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>, "
+MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, "
               "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>");
 MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters");
 
@@ -2993,7 +2989,6 @@ static int __init hp100_isa_init(void)
 
 			return -ENOMEM;
 		}
-		SET_MODULE_OWNER(dev);
 
 		err = hp100_isa_probe(dev, hp100_port[i]);
 		if (!err)