X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fmyri10ge%2Fmyri10ge.c;h=8345e4f25793085333b88a7efc5c5972239cce11;hb=18ac544306855aa366d34d29755f4596acd7a58d;hp=5a74f63618bccd8e533b76b7cba3adffb0edd379;hpb=6f3cafce0ed24372084b5648c9e8a6aacbaf9900;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 5a74f63618b..8345e4f2579 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -188,7 +188,6 @@ struct myri10ge_priv {
 	int vendor_specific_offset;
 	u32 devctl;
 	u16 msi_flags;
-	u32 pm_state[16];
 	u32 read_dma;
 	u32 write_dma;
 	u32 read_write_dma;
@@ -1879,7 +1878,7 @@ again:
 
 #ifdef NETIF_F_TSO
 	if (skb->len > (dev->mtu + ETH_HLEN)) {
-		mss = skb_shinfo(skb)->tso_size;
+		mss = skb_shinfo(skb)->gso_size;
 		if (mss != 0)
 			max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
 	}
@@ -1939,8 +1938,7 @@ again:
 
 		/* pad frames to at least ETH_ZLEN bytes */
 		if (unlikely(skb->len < ETH_ZLEN)) {
-			skb = skb_padto(skb, ETH_ZLEN);
-			if (skb == NULL) {
+			if (skb_padto(skb, ETH_ZLEN)) {
 				/* The packet is gone, so we must
 				 * return 0 */
 				mgp->stats.tx_dropped += 1;
@@ -2113,7 +2111,7 @@ abort_linearize:
 		}
 		idx = (idx + 1) & tx->mask;
 	} while (idx != last_idx);
-	if (skb_shinfo(skb)->tso_size) {
+	if (skb_shinfo(skb)->gso_size) {
 		printk(KERN_ERR
 		       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
 		       mgp->dev->name);
@@ -2198,8 +2196,6 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
  * any other device, except if forced with myri10ge_ecrc_enable > 1.
  */
 
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_PCIE	0x005d
-
 static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
 {
 	struct pci_dev *bridge = mgp->pdev->bus->self;
@@ -2414,7 +2410,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
 	pci_enable_device(pdev);
 	pci_set_master(pdev);
 
-	status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+	status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
 			     netdev->name, mgp);
 	if (status != 0) {
 		dev_err(&pdev->dev, "failed to allocate IRQ\n");
@@ -2695,7 +2691,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			mgp->msi_enabled = 1;
 	}
 
-	status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+	status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
 			     netdev->name, mgp);
 	if (status != 0) {
 		dev_err(&pdev->dev, "failed to allocate IRQ\n");