X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fnatsemi.c;h=527f9dcc7f69f3b7bc212ed4c363d0690c66b98b;hb=ce9d3c9a6a9aef61525be07fe6ba27d937236aa2;hp=b47a12d684f9ed30dd0b8cd302c09259ee394636;hpb=d96a2a5c6479342229416565944b56bc7a2b1a60;p=linux-2.6-omap-h63xx.git diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index b47a12d684f..527f9dcc7f6 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -108,7 +108,7 @@ static int full_duplex[MAX_UNITS]; #define TX_TIMEOUT (2*HZ) #define NATSEMI_HW_TIMEOUT 400 -#define NATSEMI_TIMER_FREQ 3*HZ +#define NATSEMI_TIMER_FREQ 5*HZ #define NATSEMI_PG0_NREGS 64 #define NATSEMI_RFDR_NREGS 8 #define NATSEMI_PG1_NREGS 4 @@ -560,6 +560,8 @@ struct netdev_private { /* address of a sent-in-place packet/buffer, for later free() */ struct sk_buff *tx_skbuff[TX_RING_SIZE]; dma_addr_t tx_dma[TX_RING_SIZE]; + struct net_device *dev; + struct napi_struct napi; struct net_device_stats stats; /* Media monitoring timer */ struct timer_list timer; @@ -636,7 +638,7 @@ static void init_registers(struct net_device *dev); static int start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t intr_handler(int irq, void *dev_instance); static void netdev_error(struct net_device *dev, int intr_status); -static int natsemi_poll(struct net_device *dev, int *budget); +static int natsemi_poll(struct napi_struct *napi, int budget); static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do); static void netdev_tx_done(struct net_device *dev); static int natsemi_change_mtu(struct net_device *dev, int new_mtu); @@ -803,6 +805,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, const int pcibar = 1; /* PCI base address register */ int prev_eedata; u32 tmp; + DECLARE_MAC_BUF(mac); /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -835,7 +838,6 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, dev = alloc_etherdev(sizeof (struct netdev_private)); if (!dev) return -ENOMEM; - SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); i = pci_request_regions(pdev, DRV_NAME); @@ -861,6 +863,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, dev->irq = irq; np = netdev_priv(dev); + netif_napi_add(dev, &np->napi, natsemi_poll, 64); np->pci_dev = pdev; pci_set_drvdata(pdev, dev); @@ -931,8 +934,6 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, dev->do_ioctl = &netdev_ioctl; dev->tx_timeout = &tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; - dev->poll = natsemi_poll; - dev->weight = 64; #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = &natsemi_poll_controller; @@ -958,12 +959,10 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, goto err_create_file; if (netif_msg_drv(np)) { - printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ", - dev->name, natsemi_pci_info[chip_idx].name, iostart, - pci_name(np->pci_dev)); - for (i = 0; i < ETH_ALEN-1; i++) - printk("%02x:", dev->dev_addr[i]); - printk("%02x, IRQ %d", dev->dev_addr[i], irq); + printk(KERN_INFO "natsemi %s: %s at %#08lx " + "(%s), %s, IRQ %d", + dev->name, natsemi_pci_info[chip_idx].name, iostart, + pci_name(np->pci_dev), print_mac(mac, dev->dev_addr), irq); if (dev->if_port == PORT_TP) printk(", port TP.\n"); else if (np->ignore_phy) @@ -1554,6 +1553,8 @@ static int netdev_open(struct net_device *dev) free_irq(dev->irq, dev); return i; } + napi_enable(&np->napi); + init_ring(dev); spin_lock_irq(&np->lock); init_registers(dev); @@ -1614,7 +1615,7 @@ static void do_cable_magic(struct net_device *dev) * (these values all come from National) */ if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) { - struct netdev_private *np = netdev_priv(dev); + np = netdev_priv(dev); /* the bug has been triggered - fix the coefficient */ writew(TSTDAT_FIXED, ioaddr + TSTDAT); @@ -1797,7 +1798,7 @@ static void netdev_timer(unsigned long data) struct net_device *dev = (struct net_device *)data; struct netdev_private *np = netdev_priv(dev); void __iomem * ioaddr = ns_ioaddr(dev); - int next_tick = 5*HZ; + int next_tick = NATSEMI_TIMER_FREQ; if (netif_msg_timer(np)) { /* DO NOT read the IntrStatus register, @@ -2200,10 +2201,10 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); - if (netif_rx_schedule_prep(dev)) { + if (netif_rx_schedule_prep(dev, &np->napi)) { /* Disable interrupts and register for poll */ natsemi_irq_disable(dev); - __netif_rx_schedule(dev); + __netif_rx_schedule(dev, &np->napi); } else printk(KERN_WARNING "%s: Ignoring interrupt, status %#08x, mask %#08x.\n", @@ -2216,12 +2217,11 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) /* This is the NAPI poll routine. As well as the standard RX handling * it also handles all other interrupts that the chip might raise. */ -static int natsemi_poll(struct net_device *dev, int *budget) +static int natsemi_poll(struct napi_struct *napi, int budget) { - struct netdev_private *np = netdev_priv(dev); + struct netdev_private *np = container_of(napi, struct netdev_private, napi); + struct net_device *dev = np->dev; void __iomem * ioaddr = ns_ioaddr(dev); - - int work_to_do = min(*budget, dev->quota); int work_done = 0; do { @@ -2236,7 +2236,7 @@ static int natsemi_poll(struct net_device *dev, int *budget) if (np->intr_status & (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | IntrRxErr | IntrRxOverrun)) { - netdev_rx(dev, &work_done, work_to_do); + netdev_rx(dev, &work_done, budget); } if (np->intr_status & @@ -2250,16 +2250,13 @@ static int natsemi_poll(struct net_device *dev, int *budget) if (np->intr_status & IntrAbnormalSummary) netdev_error(dev, np->intr_status); - *budget -= work_done; - dev->quota -= work_done; - - if (work_done >= work_to_do) - return 1; + if (work_done >= budget) + return work_done; np->intr_status = readl(ioaddr + IntrStatus); } while (np->intr_status); - netif_rx_complete(dev); + netif_rx_complete(dev, napi); /* Reenable interrupts providing nothing is trying to shut * the chip down. */ @@ -2268,7 +2265,7 @@ static int natsemi_poll(struct net_device *dev, int *budget) natsemi_irq_enable(dev); spin_unlock(&np->lock); - return 0; + return work_done; } /* This routine is logically part of the interrupt handler, but separated @@ -2505,8 +2502,8 @@ static void __set_rx_mode(struct net_device *dev) memset(mc_filter, 0, sizeof(mc_filter)); for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { - int i = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff; - mc_filter[i/8] |= (1 << (i & 0x07)); + int b = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff; + mc_filter[b/8] |= (1 << (b & 0x07)); } rx_mode = RxFilterEnable | AcceptBroadcast | AcceptMulticast | AcceptMyPhys; @@ -3158,6 +3155,8 @@ static int netdev_close(struct net_device *dev) dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); + napi_disable(&np->napi); + /* * FIXME: what if someone tries to close a device * that is suspended? @@ -3253,7 +3252,7 @@ static void __devexit natsemi_remove1 (struct pci_dev *pdev) * disable_irq() to enforce synchronization. * * natsemi_poll: checks before reenabling interrupts. suspend * sets hands_off, disables interrupts and then waits with - * netif_poll_disable(). + * napi_disable(). * * Interrupts must be disabled, otherwise hands_off can cause irq storms. */ @@ -3279,7 +3278,7 @@ static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state) spin_unlock_irq(&np->lock); enable_irq(dev->irq); - netif_poll_disable(dev); + napi_disable(&np->napi); /* Update the error counts. */ __get_stats(dev); @@ -3320,6 +3319,8 @@ static int natsemi_resume (struct pci_dev *pdev) pci_enable_device(pdev); /* pci_power_on(pdev); */ + napi_enable(&np->napi); + natsemi_reset(dev); init_ring(dev); disable_irq(dev->irq); @@ -3333,7 +3334,6 @@ static int natsemi_resume (struct pci_dev *pdev) mod_timer(&np->timer, jiffies + 1*HZ); } netif_device_attach(dev); - netif_poll_enable(dev); out: rtnl_unlock(); return 0;