X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fne.c;h=874d291cbaed8447f994f6ac1f4f17d78be122cc;hb=5f3b28781cbc030351e2fa0712602afbea592aae;hp=32ae91b0b61174e91a4303117880912d2d7e24b3;hpb=f0e93c10faf08e8840a0b7a44abccb520ead12df;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 32ae91b0b61..874d291cbae 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -56,10 +56,6 @@ static const char version2[] =
 #include <asm/system.h>
 #include <asm/io.h>
 
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-#include <asm/tx4938/rbtx4938.h>
-#endif
-
 #include "8390.h"
 
 #define DRV_NAME "ne"
@@ -78,8 +74,13 @@ static const char version2[] =
 /* Do we have a non std. amount of memory? (in units of 256 byte pages) */
 /* #define PACKETBUF_MEMSIZE	0x40 */
 
+#if !defined(MODULE) && (defined(CONFIG_ISA) || defined(CONFIG_M32R))
+/* Do we need a portlist for the ISA auto-probe ? */
+#define NEEDS_PORTLIST
+#endif
+
 /* A zero-terminated list of I/O addresses to be probed at boot. */
-#ifndef MODULE
+#ifdef NEEDS_PORTLIST
 static unsigned int netcard_portlist[] __initdata = {
 	0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0
 };
@@ -186,12 +187,10 @@ static void ne_block_output(struct net_device *dev, const int count,
 static int __init do_ne_probe(struct net_device *dev)
 {
 	unsigned long base_addr = dev->base_addr;
-#ifndef MODULE
+#ifdef NEEDS_PORTLIST
 	int orig_irq = dev->irq;
 #endif
 
-	SET_MODULE_OWNER(dev);
-
 	/* First check any supplied i/o locations. User knows best. <cough> */
 	if (base_addr > 0x1ff)	/* Check a single specified location. */
 		return ne_probe1(dev, base_addr);
@@ -202,7 +201,7 @@ static int __init do_ne_probe(struct net_device *dev)
 	if (isapnp_present() && (ne_probe_isapnp(dev) == 0))
 		return 0;
 
-#ifndef MODULE
+#ifdef NEEDS_PORTLIST
 	/* Last resort. The semi-risky ISA auto-probe. */
 	for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) {
 		int ioaddr = netcard_portlist[base_addr];
@@ -227,10 +226,6 @@ struct net_device * __init ne_probe(int unit)
 	sprintf(dev->name, "eth%d", unit);
 	netdev_boot_setup_check(dev);
 
-#ifdef CONFIG_TOSHIBA_RBTX4938
-	dev->base_addr = RBTX4938_RTL_8019_BASE;
-	dev->irq = RBTX4938_RTL_8019_IRQ;
-#endif
 	err = do_ne_probe(dev);
 	if (err)
 		goto out;
@@ -296,6 +291,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 	int neX000, ctron, copam, bad_card;
 	int reg0, ret;
 	static unsigned version_printed;
+	DECLARE_MAC_BUF(mac);
 
 	if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
 		return -EBUSY;
@@ -380,7 +376,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 			{E8390_RREAD+E8390_START, E8390_CMD},
 		};
 
-		for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
+		for (i = 0; i < ARRAY_SIZE(program_seq); i++)
 			outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
 
 	}
@@ -508,16 +504,14 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 	for (i = 0 ; i < ETHER_ADDR_LEN ; i++) {
 		dev->dev_addr[i] = SA_prom[i]
 			= inb_p(ioaddr + EN1_PHYS_SHIFT(i));
-		printk(" %2.2x", SA_prom[i]);
 	}
 #else
 	for(i = 0; i < ETHER_ADDR_LEN; i++) {
-		printk(" %2.2x", SA_prom[i]);
 		dev->dev_addr[i] = SA_prom[i];
 	}
 #endif
 
-	printk("\n");
+	printk("%s\n", print_mac(mac, dev->dev_addr));
 
 	ei_status.name = name;
 	ei_status.tx_start_page = start_page;