X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fne3210.c;h=0fa8e4d2276993984075a7e763f921470534e8b9;hb=bef363a1e07a913508cf10ab2d7e2b11e6313257;hp=73501d846588bb58126e3eb59edb9b92d567be96;hpb=2fc2991175bf77395e6b15fe6b2304d3bf72da40;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 73501d84658..0fa8e4d2276 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -14,10 +14,10 @@
 	2) The existing myriad of other Linux 8390 drivers by Donald Becker.
 	3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
 
-	The NE3210 is an EISA shared memory NS8390 implementation.  Shared 
+	The NE3210 is an EISA shared memory NS8390 implementation.  Shared
 	memory address > 1MB should work with this driver.
 
-	Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched 
+	Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
 	around (or perhaps there are some defective/backwards cards ???)
 
 	This driver WILL NOT WORK FOR THE NE3200 - it is completely different
@@ -133,7 +133,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 		edev->slot, ifmap[port_index]);
 	for(i = 0; i < ETHER_ADDR_LEN; i++)
 		printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
-	
+
 
 	/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
 	dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
@@ -161,13 +161,13 @@ static int __init ne3210_eisa_probe (struct device *device)
 			goto out3;
 		}
 	}
-	
+
 	if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
 		printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
 			phys_mem);
 		goto out3;
 	}
-	
+
 	printk("%dkB memory at physical address %#lx\n",
 	       NE3210_STOP_PG/4, phys_mem);
 
@@ -210,7 +210,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 
 	if ((retval = register_netdev (dev)))
 		goto out5;
-		
+
 	NS8390_init(dev, 0);
 	return 0;
 
@@ -226,7 +226,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 	release_region (ioaddr, NE3210_IO_EXTENT);
  out:
 	free_netdev (dev);
-	
+
 	return retval;
 }
 
@@ -289,7 +289,7 @@ ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_
 	hdr->count = (hdr->count + 3) & ~3;     /* Round up allocation. */
 }
 
-/*	
+/*
  *	Block input and output are easy on shared memory ethercards, the only
  *	complication is when the ring buffer wraps. The count will already
  *	be rounded up to a doubleword value via ne3210_get_8390_hdr() above.