X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fseeq8005.c;h=48c64fb20eecf164b9022aae727e6dc86e8f5290;hb=fd55cd3d3a8e57b6fac5966a23aca3cf6035b34c;hp=0d6c95c7aedf9b6accd679bd2c29869eeb20e191;hpb=f1ff0fdc353ca00ff43b7b039944b8070da22242;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 0d6c95c7aed..48c64fb20ee 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -67,7 +67,6 @@ static unsigned int net_debug = NET_DEBUG;
 
 /* Information that need to be kept for each board. */
 struct net_local {
-	struct net_device_stats stats;
 	unsigned short receive_ptr;		/* What address in packet memory do we expect a recv_pkt_header? */
 	long open_time;				/* Useless example local info. */
 };
@@ -86,7 +85,6 @@ static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t seeq8005_interrupt(int irq, void *dev_id);
 static void seeq8005_rx(struct net_device *dev);
 static int seeq8005_close(struct net_device *dev);
-static struct net_device_stats *seeq8005_get_stats(struct net_device *dev);
 static void set_multicast_list(struct net_device *dev);
 
 /* Example routines you must write ;->. */
@@ -160,6 +158,7 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
 	int old_dmaar;
 	int old_rear;
 	int retval;
+	DECLARE_MAC_BUF(mac);
 
 	if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005"))
 		return -ENODEV;
@@ -303,7 +302,8 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
 
 	/* Retrieve and print the ethernet address. */
 	for (i = 0; i < 6; i++)
-		printk(" %2.2x", dev->dev_addr[i] = SA_prom[i+6]);
+		dev->dev_addr[i] = SA_prom[i+6];
+	printk("%s", print_mac(mac, dev->dev_addr));
 
 	if (dev->irq == 0xff)
 		;			/* Do nothing: a user-level program will set it. */
@@ -338,7 +338,6 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
 	dev->hard_start_xmit 	= seeq8005_send_packet;
 	dev->tx_timeout		= seeq8005_timeout;
 	dev->watchdog_timeo	= HZ/20;
-	dev->get_stats		= seeq8005_get_stats;
 	dev->set_multicast_list = set_multicast_list;
 	dev->flags &= ~IFF_MULTICAST;
 
@@ -391,7 +390,6 @@ static void seeq8005_timeout(struct net_device *dev)
 
 static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
-	struct net_local *lp = netdev_priv(dev);
 	short length = skb->len;
 	unsigned char *buf;
 
@@ -407,7 +405,7 @@ static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	hardware_send_packet(dev, buf, length);
 	dev->trans_start = jiffies;
-	lp->stats.tx_bytes += length;
+	dev->stats.tx_bytes += length;
 	dev_kfree_skb (skb);
 	/* You might need to clean up and record Tx statistics here. */
 
@@ -463,7 +461,7 @@ static irqreturn_t seeq8005_interrupt(int irq, void *dev_id)
 		if (status & SEEQSTAT_TX_INT) {
 			handled = 1;
 			outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
-			lp->stats.tx_packets++;
+			dev->stats.tx_packets++;
 			netif_wake_queue(dev);	/* Inform upper layers. */
 		}
 		if (status & SEEQSTAT_RX_INT) {
@@ -531,11 +529,11 @@ static void seeq8005_rx(struct net_device *dev)
 		}
 
 		if (pkt_hdr & SEEQPKTS_ANY_ERROR) {				/* There was an error. */
-			lp->stats.rx_errors++;
-			if (pkt_hdr & SEEQPKTS_SHORT) lp->stats.rx_frame_errors++;
-			if (pkt_hdr & SEEQPKTS_DRIB) lp->stats.rx_frame_errors++;
-			if (pkt_hdr & SEEQPKTS_OVERSIZE) lp->stats.rx_over_errors++;
-			if (pkt_hdr & SEEQPKTS_CRC_ERR) lp->stats.rx_crc_errors++;
+			dev->stats.rx_errors++;
+			if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++;
+			if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++;
+			if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++;
+			if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++;
 			/* skip over this packet */
 			outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
 			outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA);
@@ -547,10 +545,9 @@ static void seeq8005_rx(struct net_device *dev)
 			skb = dev_alloc_skb(pkt_len);
 			if (skb == NULL) {
 				printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-				lp->stats.rx_dropped++;
+				dev->stats.rx_dropped++;
 				break;
 			}
-			skb->dev = dev;
 			skb_reserve(skb, 2);	/* align data on 16 byte */
 			buf = skb_put(skb,pkt_len);
 
@@ -568,8 +565,8 @@ static void seeq8005_rx(struct net_device *dev)
 			skb->protocol=eth_type_trans(skb,dev);
 			netif_rx(skb);
 			dev->last_rx = jiffies;
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes += pkt_len;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
 		}
 	} while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN));
 
@@ -600,15 +597,6 @@ static int seeq8005_close(struct net_device *dev)
 
 }
 
-/* Get the current statistics.	This may be called with the card open or
-   closed. */
-static struct net_device_stats *seeq8005_get_stats(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-
-	return &lp->stats;
-}
-
 /* Set or clear the multicast filter for this adaptor.
    num_addrs == -1	Promiscuous mode, receive all packets
    num_addrs == 0	Normal mode, clear multicast list