X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fath5k%2Freg.h;h=e557fe178bbf9401af6c7846118d0a7f46a16c84;hb=2bea2e4abf2fe8bc7384103aeaad91089109cfba;hp=7562bf173d3e08bcc462a7735ca7a83640c96cb8;hpb=7686ad5606f08d9dfb33a2087a36c8366366015b;p=linux-2.6-omap-h63xx.git diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 7562bf173d3..e557fe178bb 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -1,7 +1,7 @@ /* - * Copyright (c) 2007 Nick Kossifidis - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter - * Copyright (c) 2007 Michael Taylor + * Copyright (c) 2006-2008 Nick Kossifidis + * Copyright (c) 2004-2008 Reyk Floeter + * Copyright (c) 2007-2008 Michael Taylor * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -29,6 +29,10 @@ * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf + * + * This file also contains register values found on a memory dump of + * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal + * released by Atheros and on various debug messages found on the net. */ @@ -295,7 +299,7 @@ #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ #define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ -#define AR5K_ISR_BRSSI 0x00020000 +#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ @@ -303,46 +307,56 @@ #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ #define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ -#define AR5K_ISR_TIM 0x00800000 /* [5210] */ -#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */ -#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/ -#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ -#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ -#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */ +#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ +#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ +#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ +#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ /* * Secondary status registers [5211+] (0 - 4) * - * I guess from the names that these give the status for each - * queue, that's why only masks are defined here, haven't got - * any info about them (couldn't find them anywhere in ar5k code). + * These give the status for each QCU, only QCUs 0-9 are + * represented. */ #define AR5K_SISR0 0x0084 /* Register Address [5211+] */ #define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SISR0_QCU_TXOK_S 0 #define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SISR0_QCU_TXDESC_S 16 #define AR5K_SISR1 0x0088 /* Register Address [5211+] */ #define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SISR1_QCU_TXERR_S 0 #define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SISR1_QCU_TXEOL_S 16 #define AR5K_SISR2 0x008c /* Register Address [5211+] */ #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SISR2_QCU_TXURN_S 0 #define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ #define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */ +#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */ #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ #define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SISR3_QCBORN_S 0 #define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SISR3_QCBRURN_S 16 #define AR5K_SISR4 0x0094 /* Register Address [5211+] */ #define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SISR4_QTRIG_S 0 /* * Shadow read-and-clear interrupt status registers [5211+] @@ -379,7 +393,7 @@ #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ #define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ -#define AR5K_IMR_BRSSI 0x00020000 +#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ @@ -387,12 +401,14 @@ #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ #define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ -#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */ +#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ -#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ -#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ -#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */ +#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ +#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ +#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ /* * Secondary interrupt mask registers [5211+] (0 - 4) @@ -414,13 +430,14 @@ #define AR5K_SIMR2_QCU_TXURN_S 0 #define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ #define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */ +#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */ #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ #define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ #define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ #define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ @@ -586,15 +603,15 @@ #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ -#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ -#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ -#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ +#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ -#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */ -#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */ +#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ +#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ #define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ -#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */ -#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ #define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ #define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ #define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ @@ -663,6 +680,7 @@ #define AR5K_DCU_LCL_IFS_CW_MAX_S 10 #define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ #define AR5K_DCU_LCL_IFS_AIFS_S 20 +#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ #define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) /* @@ -691,11 +709,7 @@ /* * DCU misc registers [5211+] * - * For some of the registers i couldn't find in the code - * (only backoff stuff is there realy) i tried to match the - * names with 802.11e parameters etc, so i guess VIRTCOL here - * means Virtual Collision and HCFPOLL means Hybrid Coordination - * factor Poll (CF- Poll). Arbiter lockout control controls the + * Note: Arbiter lockout control controls the * behaviour on low priority queues when we have multiple queues * with pending frames. Intra-frame lockout means we wait until * the queue's current frame transmits (with post frame backoff and bursting) @@ -705,15 +719,20 @@ * No lockout means there is no special handling. */ #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ -#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series + station RTS/data failure count + reset policy (?) */ +#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series + CW reset policy */ +#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ #define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ #define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ #define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ -#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 -#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 -#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 #define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 @@ -768,8 +787,9 @@ #define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 #define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ @@ -820,8 +840,6 @@ #define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ #define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ #define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ -#define AR5K_RESET_CTL_CHIP (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA | \ - AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY) /* * Sleep control register @@ -833,9 +851,11 @@ #define AR5K_SLEEP_CTL_SLE_S 16 #define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ -#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 +#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ -/* more bits */ +#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ +#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ +#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ /* * Interrupt pending register @@ -851,27 +871,28 @@ /* * PCI configuration register + * TODO: Fix LED stuff */ #define AR5K_PCICFG 0x4010 /* Register Address */ #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ -#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ #define AR5K_PCICFG_EESIZE_S 3 #define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ #define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ #define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ -#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */ +#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ #define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ #define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ #define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ #define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ #define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ -#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */ -#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */ +#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ +#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ -#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */ +#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ @@ -884,7 +905,8 @@ #define AR5K_PCICFG_LEDSTATE \ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) -#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 /* * "General Purpose Input/Output" (GPIO) control register @@ -906,8 +928,8 @@ #define AR5K_GPIOCR 0x4014 /* Register Address */ #define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ -#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */ -#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */ +#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ +#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ #define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ #define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ #define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ @@ -925,7 +947,6 @@ #define AR5K_GPIODI 0x401c #define AR5K_GPIODI_M 0x0000002f - /* * Silicon revision register */ @@ -935,7 +956,59 @@ #define AR5K_SREV_VER 0x000000ff /* Mask for version */ #define AR5K_SREV_VER_S 4 +/* + * TXE write posting register + */ +#define AR5K_TXEPOST 0x4028 + +/* + * QCU sleep mask + */ +#define AR5K_QCU_SLEEP_MASK 0x402c + +/* 0x4068 is compression buffer configuration + * register on 5414 and pm configuration register + * on 5424 and newer pci-e chips. */ + +/* + * Compression buffer configuration + * register (enable/disable) [5414] + */ +#define AR5K_5414_CBCFG 0x4068 +#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ + +/* + * PCI-E Power managment configuration + * and status register [5424+] + */ +#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ +/* Only 5424 */ +#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 + when d2_sleep_en is asserted */ +#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ +#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ +#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes + down */ +/* Wake On Wireless */ +#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ +#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ +#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ +#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 +#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 +#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 +#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 + +/* + * PCI-E Workaround enable register + */ +#define AR5K_PCIE_WAEN 0x407c +/* + * PCI-E Serializer/Desirializer + * registers + */ +#define AR5K_PCIE_SERDES 0x4080 +#define AR5K_PCIE_SERDES_RESET 0x4084 /*====EEPROM REGISTERS====*/ @@ -976,98 +1049,6 @@ */ #define AR5K_EEPROM_BASE 0x6000 -/* - * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) - */ -#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ -#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ -#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ -#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ -#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ - -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 -#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ -#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ -#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -#define AR5K_EEPROM_INFO_CKSUM 0xffff -#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) - -#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ -#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ -#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ -#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 -#define AR5K_EEPROM_VERSION_4_4 0x4004 -#define AR5K_EEPROM_VERSION_4_5 0x4005 -#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x4007 - -#define AR5K_EEPROM_MODE_11A 0 -#define AR5K_EEPROM_MODE_11B 1 -#define AR5K_EEPROM_MODE_11G 2 - -#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ -#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) -#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) -#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ -#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ -#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ -#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ - -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - -/* Newer EEPROMs are using a different offset */ -#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ - (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) - -#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) - -/* calibration settings */ -#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) -#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) -#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) -#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ - -/* [3.1 - 3.3] */ -#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec -#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed - -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 0x00c4 -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) -#define AR5K_EEPROM_MISC1 0x00c5 -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) - /* * EEPROM data register */ @@ -1100,13 +1081,27 @@ * EEPROM config register */ #define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ -#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001 +#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ +#define AR5K_EEPROM_CFG_SIZE_AUTO 0 +#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 +#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 +#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 #define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ #define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ -#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */ +#define AR5K_EEPROM_CFG_CLK_RATE_S 3 +#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 +#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 +#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ +#define AR5K_EEPROM_CFG_PROT_KEY_S 8 #define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ +/* + * TODO: Wake On Wireless registers + * Range 0x7000 - 0x7ce0 + */ + /* * Protocol Control Unit (PCU) registers */ @@ -1139,11 +1134,13 @@ #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ #define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ #define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ -#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */ -#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ +#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ #define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ -#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ #define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ +#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ +#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ /* * First BSSID register (MAC address, lower 32bits) @@ -1402,16 +1399,16 @@ #define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 #define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) -#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ #define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 #define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) -#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */ -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ @@ -1420,12 +1417,15 @@ #define AR5K_DIAG_SW_SCRAM_SEED_S 10 #define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 -#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 +#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ #define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) -#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 +#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ #define AR5K_DIAG_SW_OBSPT_S 18 -/* more bits */ +#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ +#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ +#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ +#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ /* * TSF (clock) register (lower 32 bits) @@ -1636,16 +1636,16 @@ * * XXX: PCDAC steps (0.5dbm) or DBM ? * - * XXX: Mask changes for newer chips to 7f - * like tx power table ? */ #define AR5K_TXPC 0x80e8 /* Register Address */ -#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */ +#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ #define AR5K_TXPC_ACK_S 0 -#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */ +#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ #define AR5K_TXPC_CTS_S 8 -#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */ -#define AR5K_TXPC_CHIRP_S 22 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ +#define AR5K_TXPC_CHIRP_S 16 +#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ +#define AR5K_TXPC_DOPPLER_S 24 /* * Profile count registers @@ -1656,14 +1656,19 @@ #define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ /* - * Quiet (period) control registers (?) + * Quiet period control registers */ #define AR5K_QUIET_CTL1 0x80fc /* Register Address */ -#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */ -#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ +#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ + #define AR5K_QUIET_CTL2 0x8100 /* Register Address */ -#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */ -#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ +#define AR5K_QUIET_CTL2_QT_PER_S 0 +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ +#define AR5K_QUIET_CTL2_QT_DUR_S 16 /* * TSF parameter register @@ -1673,12 +1678,15 @@ #define AR5K_TSF_PARM_INC_S 0 /* - * QoS register (?) + * QoS NOACK policy */ -#define AR5K_QOS 0x8108 /* Register Address */ -#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */ -#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */ -#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */ +#define AR5K_QOS_NOACK 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ +#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ +#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ +#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8 /* * PHY error filter register @@ -1702,29 +1710,15 @@ /* * MIC QoS control register (?) */ -#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ -#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */ -#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */ -#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */ -#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */ -#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */ -#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */ -#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */ -#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */ -#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ /* * MIC QoS select register (?) */ -#define AR5K_MIC_QOS_SEL 0x811c -#define AR5K_MIC_QOS_SEL_0 0x00000001 -#define AR5K_MIC_QOS_SEL_1 0x00000010 -#define AR5K_MIC_QOS_SEL_2 0x00000100 -#define AR5K_MIC_QOS_SEL_3 0x00001000 -#define AR5K_MIC_QOS_SEL_4 0x00010000 -#define AR5K_MIC_QOS_SEL_5 0x00100000 -#define AR5K_MIC_QOS_SEL_6 0x01000000 -#define AR5K_MIC_QOS_SEL_7 0x10000000 +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) /* * Misc mode control register (?) @@ -1758,6 +1752,11 @@ */ #define AR5K_TSF_THRES 0x813c +/* + * TODO: Wake On Wireless registers + * Range: 0x8147 - 0x818c + */ + /* * Rate -> ACK SIFS mapping table (32 entries) */ @@ -1873,7 +1872,8 @@ */ #define AR5K_PHY_TURBO 0x9804 /* Register Address */ #define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ -#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ +#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ /* * PHY agility command register @@ -1883,6 +1883,11 @@ #define AR5K_PHY_TST1 0x9808 #define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ #define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC_S 1 +#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ +#define AR5K_PHY_TST1_TXSRC_ALT_S 7 + /* * PHY timing register 3 [5112+] @@ -1907,15 +1912,23 @@ /* * PHY RF control registers - * (i think these are delay times, - * these calibration values exist - * in EEPROM) */ #define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ -#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 #define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0 + +#define AR5K_PHY_ADC_CTL 0x982c +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 +#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 +#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 +#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 #define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ @@ -1937,35 +1950,43 @@ * PHY settling register */ #define AR5K_PHY_SETTLING 0x9844 /* Register Address */ -#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */ -#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ +#define AR5K_PHY_SETTLING_AGC_S 0 +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */ +#define AR5K_PHY_SETTLINK_SWITCH_S 7 /* * PHY Gain registers */ #define AR5K_PHY_GAIN 0x9848 /* Register Address */ -#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 +#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 +#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 #define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ /* - * Desired size register + * Desired ADC/PGA size register * (for more infos read ANI patent) */ #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ -#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ -#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ -#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 /* * PHY signal register * (for more infos read ANI patent) */ #define AR5K_PHY_SIG 0x9858 /* Register Address */ -#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ #define AR5K_PHY_SIG_FIRSTEP_S 12 -#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */ +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ #define AR5K_PHY_SIG_FIRPWR_S 18 /* @@ -1973,9 +1994,9 @@ * (for more infos read ANI patent) */ #define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ -#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ #define AR5K_PHY_AGCCOARSE_LO_S 7 -#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */ +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ #define AR5K_PHY_AGCCOARSE_HI_S 15 /* @@ -1984,6 +2005,8 @@ #define AR5K_PHY_AGCCTL 0x9860 /* Register address */ #define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ #define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ +#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ /* * PHY noise floor status register @@ -1994,7 +2017,10 @@ #define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) #define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) -#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62_S 12 +#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */ +#define AR5K_PHY_NF_MINCCA_PWR_S 19 /* * PHY ADC saturation register [5110] @@ -2034,24 +2060,31 @@ */ #define AR5K_PHY_SCR 0x9870 #define AR5K_PHY_SCR_32MHZ 0x0000001f + #define AR5K_PHY_SLMT 0x9874 #define AR5K_PHY_SLMT_32MHZ 0x0000007f + #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e + /* * PHY PLL (Phase Locked Loop) control register */ #define AR5K_PHY_PLL 0x987c -#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */ -#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */ +#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ +/* 40MHz -> 5GHz band */ +#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 #define AR5K_PHY_PLL_40MHZ_5212 0x000000aa +#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 #define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) -#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */ +/* 44MHz -> 2.4GHz band */ +#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 #define AR5K_PHY_PLL_44MHZ_5212 0x000000ab #define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) + #define AR5K_PHY_PLL_RF5111 0x00000000 #define AR5K_PHY_PLL_RF5112 0x00000040 #define AR5K_PHY_PLL_HALF_RATE 0x00000100 @@ -2117,6 +2150,19 @@ #define AR5K_PHY_RFSTG 0x98d4 #define AR5K_PHY_RFSTG_DISABLE 0x00000021 +/* + * BIN masks (?) + */ +#define AR5K_PHY_BIN_MASK_1 0x9900 +#define AR5K_PHY_BIN_MASK_2 0x9904 +#define AR5K_PHY_BIN_MASK_3 0x9908 + +#define AR5K_PHY_BIN_MASK_CTL 0x990c +#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 +#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 +#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 + /* * PHY Antenna control register */ @@ -2164,6 +2210,7 @@ #define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ @@ -2210,7 +2257,6 @@ #define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ #define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ - /* * PHY TX rate power registers [5112+] */ @@ -2232,6 +2278,8 @@ #define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 #define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ +#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 +#define AR5K_PHY_FRAME_CTL_EMU_S 31 /*---[5110/5111]---*/ #define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ #define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ @@ -2250,48 +2298,36 @@ * PHY radar detection register [5111+] */ #define AR5K_PHY_RADAR 0x9954 - -/* Radar enable ........ ........ ........ .......1 */ #define AR5K_PHY_RADAR_ENABLE 0x00000001 -#define AR5K_PHY_RADAR_DISABLE 0x00000000 -#define AR5K_PHY_RADAR_ENABLE_S 0 - -/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1... -at power on. */ -#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188 - -/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1 -after DFS is enabled */ -#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d - -/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........ - * power out threshold. - * 7-bits, standard power range {0..127} in 1/2 dBm units. */ -#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000 -#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24 - -/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........ - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000 -#define AR5K_PHY_RADAR_RADARRSSITHR_S 18 - -/* Pulse height threshold ........ ......11 1111.... ........ - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000 -#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12 - -/* Pulse RSSI/SNR threshold ........ ........ ....1111 11...... - * 6-bits, dBm range {0..63} in dBm units. */ -#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0 -#define AR5K_PHY_RADAR_PULSERSSITHR_S 6 - -/* Inband threshold ........ ........ ........ ..11111. - * 5-bits, units unknown {0..31} (? MHz ?) */ -#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e +#define AR5K_PHY_RADAR_DISABLE 0x00000000 +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold + 5-bits, units unknown {0..31} + (? MHz ?) */ #define AR5K_PHY_RADAR_INBANDTHR_S 1 +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PRSSI_THR_S 6 + +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 + +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_RSSI_THR_S 18 + +#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response + filter power out threshold. + 7-bits, standard power range + {0..127} in 1/2 dBm units. */ +#define AR5K_PHY_RADAR_FIRPWR_THRS 24 + /* - * PHY antenna switch table registers [5110] + * PHY antenna switch table registers */ #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 @@ -2302,25 +2338,65 @@ after DFS is enabled */ #define AR5K_PHY_NFTHRES 0x9968 /* - * PHY clock sleep registers [5112+] + * Sigma Delta register (?) [5213] */ -#define AR5K_PHY_SCLOCK 0x99f0 -#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c -#define AR5K_PHY_SDELAY 0x99f4 -#define AR5K_PHY_SDELAY_32MHZ 0x000000ff -#define AR5K_PHY_SPENDING 0x99f8 -#define AR5K_PHY_SPENDING_14 0x00000014 -#define AR5K_PHY_SPENDING_18 0x00000018 -#define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 -/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ -/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ -#define AR5K_PHY_SPENDING_RF5413 0x00000014 -#define AR5K_PHY_SPENDING_RF2413 0x00000014 -#define AR5K_PHY_SPENDING_RF2425 0x00000018 +#define AR5K_PHY_SIGMA_DELTA 0x996C +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 +#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 +#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 +#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 +#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 + +/* + * RF restart register [5112+] (?) + */ +#define AR5K_PHY_RESTART 0x9970 /* restart */ +#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ +#define AR5K_PHY_RESTART_DIV_GC_S 18 + +/* + * RF Bus access request register (for synth-oly channel switching) + */ +#define AR5K_PHY_RFBUS_REQ 0x997C +#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 + +/* + * Spur mitigation masks (?) + */ +#define AR5K_PHY_TIMING_7 0x9980 +#define AR5K_PHY_TIMING_8 0x9984 +#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 + +#define AR5K_PHY_BIN_MASK2_1 0x9988 +#define AR5K_PHY_BIN_MASK2_2 0x998c +#define AR5K_PHY_BIN_MASK2_3 0x9990 + +#define AR5K_PHY_BIN_MASK2_4 0x9994 +#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 + +#define AR_PHY_TIMING_9 0x9998 +#define AR_PHY_TIMING_10 0x999c +#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff +#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0 + +/* + * Spur mitigation control + */ +#define AR_PHY_TIMING_11 0x99a0 /* Register address */ +#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ +#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 +#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ +#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20 +#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ +#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ /* - * Misc PHY/radio registers [5110 - 5111] + * Gain tables */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) @@ -2340,9 +2416,10 @@ after DFS is enabled */ #define AR5K_PHY_CURRENT_RSSI 0x9c1c /* - * PHY RF Bus grant register (?) + * PHY RF Bus grant register */ #define AR5K_PHY_RFBUS_GRANT 0x9c20 +#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 /* * PHY ADC test register @@ -2385,6 +2462,31 @@ after DFS is enabled */ #define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 #define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 +/* + * Heavy clip enable register + */ +#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 + +/* + * PHY clock sleep registers [5112+] + */ +#define AR5K_PHY_SCLOCK 0x99f0 +#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c +#define AR5K_PHY_SDELAY 0x99f4 +#define AR5K_PHY_SDELAY_32MHZ 0x000000ff +#define AR5K_PHY_SPENDING 0x99f8 +#define AR5K_PHY_SPENDING_14 0x00000014 +#define AR5K_PHY_SPENDING_18 0x00000018 +#define AR5K_PHY_SPENDING_RF5111 0x00000018 +#define AR5K_PHY_SPENDING_RF5112 0x00000014 +/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ +/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ +#define AR5K_PHY_SPENDING_RF5413 0x00000018 +#define AR5K_PHY_SPENDING_RF2413 0x00000018 +#define AR5K_PHY_SPENDING_RF2316 0x00000018 +#define AR5K_PHY_SPENDING_RF2317 0x00000018 +#define AR5K_PHY_SPENDING_RF2425 0x00000014 + /* * PHY PAPD I (power?) table (?) * (92! entries) @@ -2436,10 +2538,47 @@ after DFS is enabled */ #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 +/* Same address is used for antenna diversity activation */ +#define AR5K_PHY_FAST_ANT_DIV 0xa208 +#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 + /* * PHY 2GHz gain register [5111+] */ -#define AR5K_PHY_GAIN_2GHZ 0xa20c -#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 +#define AR5K_PHY_GAIN_2GHZ 0xa20c +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 -#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c +#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c + +#define AR5K_PHY_CCK_RX_CTL_4 0xa21c +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 + +#define AR5K_PHY_DAG_CCK_CTL 0xa228 +#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 + +#define AR5K_PHY_FAST_ADC 0xa24c + +#define AR5K_PHY_BLUETOOTH 0xa254 + +/* + * Transmit Power Control register + * [2413+] + */ +#define AR5K_PHY_TPC_RG1 0xa258 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 + +#define AR5K_PHY_TPC_RG5 0xa26C +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22