X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fzd1211rw%2Fzd_chip.c;h=0acb5c345734760645025d36a7d289504ec93611;hb=95237b80a3021ce5abb4d9ad330355549026f9c3;hp=99e5b03b3f514043802a457059bfadafc1770cc9;hpb=4f4ae0d42680889c62db4e1f3e6b4aa7787a7257;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 99e5b03b3f5..0acb5c34573 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -771,10 +771,10 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip)
 {
 	static const struct zd_ioreq32 ioreqs[] = {
 		{ CR_ZD1211B_RETRY_MAX,		0x02020202 },
-		{ CR_ZD1211B_TX_PWR_CTL4,	0x007f003f },
-		{ CR_ZD1211B_TX_PWR_CTL3,	0x007f003f },
-		{ CR_ZD1211B_TX_PWR_CTL2,       0x003f001f },
-		{ CR_ZD1211B_TX_PWR_CTL1,       0x001f000f },
+		{ CR_ZD1211B_CWIN_MAX_MIN_AC0,	0x007f003f },
+		{ CR_ZD1211B_CWIN_MAX_MIN_AC1,	0x007f003f },
+		{ CR_ZD1211B_CWIN_MAX_MIN_AC2,  0x003f001f },
+		{ CR_ZD1211B_CWIN_MAX_MIN_AC3,  0x001f000f },
 		{ CR_ZD1211B_AIFS_CTL1,		0x00280028 },
 		{ CR_ZD1211B_AIFS_CTL2,		0x008C003C },
 		{ CR_ZD1211B_TXOP,		0x01800824 },
@@ -809,6 +809,7 @@ static int hw_init_hmac(struct zd_chip *chip)
 		{ CR_AFTER_PNP,			0x1 },
 		{ CR_WEP_PROTECT,		0x114 },
 		{ CR_IFS_VALUE,			IFS_VALUE_DEFAULT },
+		{ CR_CAM_MODE,			MODE_AP_WDS},
 	};
 
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
@@ -986,7 +987,7 @@ static int print_fw_version(struct zd_chip *chip)
 	return 0;
 }
 
-static int set_mandatory_rates(struct zd_chip *chip, int mode)
+static int set_mandatory_rates(struct zd_chip *chip, int gmode)
 {
 	u32 rates;
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
@@ -994,17 +995,12 @@ static int set_mandatory_rates(struct zd_chip *chip, int mode)
 	 * that the device is supporting. Until further notice we should try
 	 * to support 802.11g also for full speed USB.
 	 */
-	switch (mode) {
-	case MODE_IEEE80211B:
+	if (!gmode)
 		rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M;
-		break;
-	case MODE_IEEE80211G:
+	else
 		rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M|
 			CR_RATE_6M|CR_RATE_12M|CR_RATE_24M;
-		break;
-	default:
-		return -EINVAL;
-	}
+
 	return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL);
 }
 
@@ -1108,7 +1104,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
 	 * It might be discussed, whether we should suppport pure b mode for
 	 * full speed USB.
 	 */
-	r = set_mandatory_rates(chip, MODE_IEEE80211G);
+	r = set_mandatory_rates(chip, 1);
 	if (r)
 		goto out;
 	/* Disabling interrupts is certainly a smart thing here.