X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fzd1211rw%2Fzd_ieee80211.h;h=26b79f19758751daadade34a7422595397950d4e;hb=5e5cddbc3f2936c9fefbae64633c522e242c350d;hp=c4f36d39642b1bdeccf8106415da7a337448acf9;hpb=b22364c8eec89e6b0c081a237f3b6348df87796f;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h
index c4f36d39642..26b79f19758 100644
--- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h
+++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h
@@ -1,7 +1,27 @@
+/* ZD1211 USB-WLAN driver for Linux
+ *
+ * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
+ * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
 #ifndef _ZD_IEEE80211_H
 #define _ZD_IEEE80211_H
 
-#include <net/ieee80211.h>
+#include <net/mac80211.h>
 
 /* Additional definitions from the standards.
  */
@@ -19,22 +39,7 @@ enum {
 	MAX_CHANNEL24 = 14,
 };
 
-struct channel_range {
-	u8 start;
-	u8 end; /* exclusive (channel must be less than end) */
-};
-
-struct iw_freq;
-
-int zd_geo_init(struct ieee80211_device *ieee, u8 regdomain);
-
-const struct channel_range *zd_channel_range(u8 regdomain);
-int zd_regdomain_supports_channel(u8 regdomain, u8 channel);
-int zd_regdomain_supported(u8 regdomain);
-
-/* for 2.4 GHz band */
-int zd_channel_to_freq(struct iw_freq *freq, u8 channel);
-int zd_find_channel(u8 *channel, const struct iw_freq *freq);
+void zd_geo_init(struct ieee80211_hw *hw, u8 regdomain);
 
 #define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
 
@@ -43,21 +48,25 @@ struct ofdm_plcp_header {
 	__le16 service;
 } __attribute__((packed));
 
-static inline u8 zd_ofdm_plcp_header_rate(
-	const struct ofdm_plcp_header *header)
+static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
 {
 	return header->prefix[0] & 0xf;
 }
 
-/* These are referred to as zd_rates */
-#define ZD_OFDM_RATE_6M		0xb
-#define ZD_OFDM_RATE_9M		0xf
-#define ZD_OFDM_RATE_12M	0xa
-#define ZD_OFDM_RATE_18M	0xe
-#define ZD_OFDM_RATE_24M	0x9
-#define ZD_OFDM_RATE_36M	0xd
-#define ZD_OFDM_RATE_48M	0x8
-#define ZD_OFDM_RATE_54M	0xc
+/* The following defines give the encoding of the 4-bit rate field in the
+ * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
+ * define the zd-rate values for OFDM.
+ *
+ * See the struct zd_ctrlset definition in zd_mac.h.
+ */
+#define ZD_OFDM_PLCP_RATE_6M	0xb
+#define ZD_OFDM_PLCP_RATE_9M	0xf
+#define ZD_OFDM_PLCP_RATE_12M	0xa
+#define ZD_OFDM_PLCP_RATE_18M	0xe
+#define ZD_OFDM_PLCP_RATE_24M	0x9
+#define ZD_OFDM_PLCP_RATE_36M	0xd
+#define ZD_OFDM_PLCP_RATE_48M	0x8
+#define ZD_OFDM_PLCP_RATE_54M	0xc
 
 struct cck_plcp_header {
 	u8 signal;
@@ -66,20 +75,21 @@ struct cck_plcp_header {
 	__le16 crc16;
 } __attribute__((packed));
 
-static inline u8 zd_cck_plcp_header_rate(const struct cck_plcp_header *header)
+static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
 {
 	return header->signal;
 }
 
-#define ZD_CCK_SIGNAL_1M	0x0a
-#define ZD_CCK_SIGNAL_2M	0x14
-#define ZD_CCK_SIGNAL_5M5	0x37
-#define ZD_CCK_SIGNAL_11M	0x6e
-
-enum ieee80211_std {
-	IEEE80211B = 0x01,
-	IEEE80211A = 0x02,
-	IEEE80211G = 0x04,
-};
+/* These defines give the encodings of the signal field in the 802.11b PLCP
+ * header. The signal field gives the bit rate of the following packet. Even
+ * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
+ * rate to stay consistent with Zydas and our use of the term.
+ *
+ * Notify that these values are *not* used in the zd-rates.
+ */
+#define ZD_CCK_PLCP_SIGNAL_1M	0x0a
+#define ZD_CCK_PLCP_SIGNAL_2M	0x14
+#define ZD_CCK_PLCP_SIGNAL_5M5	0x37
+#define ZD_CCK_PLCP_SIGNAL_11M	0x6e
 
 #endif /* _ZD_IEEE80211_H */