X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fparisc%2Fdino.c;h=fd56128525d1b11e01bc71624025258957da15dd;hb=1de765c1e940e23d83ec57035769e8af003f8796;hp=6e8ed0c81a6cbd5883fafa74b940e77077d9cee7;hpb=875999c5539999f61a45620aae0c3e5fb1d2b035;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 6e8ed0c81a6..fd56128525d 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -43,7 +43,6 @@
 **       for PCI drivers devices which implement/use MMIO registers.
 */
 
-#include <linux/config.h>
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -181,7 +180,7 @@ static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where,
 	void __iomem *base_addr = d->hba.base_addr;
 	unsigned long flags;
 
-	DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+	DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
 									size);
 	spin_lock_irqsave(&d->dinosaur_pen, flags);
 
@@ -216,7 +215,7 @@ static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where,
 	void __iomem *base_addr = d->hba.base_addr;
 	unsigned long flags;
 
-	DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+	DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
 									size);
 	spin_lock_irqsave(&d->dinosaur_pen, flags);
 
@@ -299,10 +298,10 @@ struct pci_port_ops dino_port_ops = {
 
 static void dino_disable_irq(unsigned int irq)
 {
-	struct dino_device *dino_dev = irq_desc[irq].handler_data;
+	struct dino_device *dino_dev = irq_desc[irq].chip_data;
 	int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
 
-	DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
+	DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, irq);
 
 	/* Clear the matching bit in the IMR register */
 	dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -311,11 +310,11 @@ static void dino_disable_irq(unsigned int irq)
 
 static void dino_enable_irq(unsigned int irq)
 {
-	struct dino_device *dino_dev = irq_desc[irq].handler_data;
+	struct dino_device *dino_dev = irq_desc[irq].chip_data;
 	int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
 	u32 tmp;
 
-	DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
+	DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, irq);
 
 	/*
 	** clear pending IRQ bits
@@ -341,7 +340,7 @@ static void dino_enable_irq(unsigned int irq)
 	tmp = __raw_readl(dino_dev->hba.base_addr+DINO_ILR);
 	if (tmp & DINO_MASK_IRQ(local_irq)) {
 		DBG(KERN_WARNING "%s(): IRQ asserted! (ILR 0x%x)\n",
-				__FUNCTION__, tmp);
+				__func__, tmp);
 		gsc_writel(dino_dev->txn_data, dino_dev->txn_addr);
 	}
 }
@@ -369,8 +368,7 @@ static struct hw_interrupt_type dino_interrupt_type = {
  * ilr_loop counter is a kluge to prevent a "stuck" IRQ line from
  * wedging the CPU. Could be removed or made optional at some point.
  */
-static irqreturn_t
-dino_isr(int irq, void *intr_dev, struct pt_regs *regs)
+static irqreturn_t dino_isr(int irq, void *intr_dev)
 {
 	struct dino_device *dino_dev = intr_dev;
 	u32 mask;
@@ -390,8 +388,8 @@ ilr_again:
 		int local_irq = __ffs(mask);
 		int irq = dino_dev->global_irq[local_irq];
 		DBG(KERN_DEBUG "%s(%d, %p) mask 0x%x\n",
-			__FUNCTION__, irq, intr_dev, mask);
-		__do_IRQ(irq, regs);
+			__func__, irq, intr_dev, mask);
+		__do_IRQ(irq);
 		mask &= ~(1 << local_irq);
 	} while (mask);
 
@@ -498,7 +496,6 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
 		list_for_each_safe(ln, tmp_ln, &bus->devices) {
 			struct pci_dev *dev = pci_dev_b(ln);
 
-			list_del(&dev->global_list);
 			list_del(&dev->bus_list);
 		}
 			
@@ -569,7 +566,7 @@ dino_fixup_bus(struct pci_bus *bus)
 	int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num);
 
 	DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
-	    __FUNCTION__, bus, bus->secondary, 
+	    __func__, bus, bus->secondary,
 	    bus->bridge->platform_data);
 
 	/* Firmware doesn't set up card-mode dino, so we have to */