X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fpcmcia%2Fsa1100_shannon.c;h=46d8c1977c2a44592652fc4abfb9ce1aeb1ca3fa;hb=058ddee5625ade9e9e011b9ae155ac3b8d4eda3a;hp=9456f5478d09251178534d354a947ffd38032be3;hpb=ef29498655b18d2bfd69048e20835d19333981ab;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 9456f5478d0..46d8c1977c2 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -9,9 +9,9 @@
 #include <linux/device.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/shannon.h>
+#include <mach/shannon.h>
 #include <asm/irq.h>
 #include "sa1100_generic.h"
 
@@ -73,19 +73,19 @@ shannon_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 {
 	switch (state->Vcc) {
 	case 0:	/* power off */
-		printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+		printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
 		break;
 	case 50:
-		printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+		printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
 	case 33:
 		break;
 	default:
 		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-		       __FUNCTION__, state->Vcc);
+		       __func__, state->Vcc);
 		return -1;
 	}
 
-	printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+	printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
 	
 	/* Silently ignore Vpp, output enable, speaker enable. */