X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=a5f0aaaf0dd443863b6d0752e580cc6c5ffad515;hb=9927c68864e9c39cc317b4f559309ba29e642168;hp=a6676be87843ad43d0c0fc57ff441993ac7a3985;hpb=95b00786f3b8fa99f53931361beeb4c10504ad87;p=linux-2.6-omap-h63xx.git diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a6676be8784..a5f0aaaf0dd 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -179,7 +179,15 @@ config CHR_DEV_SCH say M here and read and . The module will be called ch.o. If unsure, say N. - + +config SCSI_ENCLOSURE + tristate "SCSI Enclosure Support" + depends on SCSI && ENCLOSURE_SERVICES + help + Enclosures are devices sitting on or in SCSI backplanes that + manage devices. If you have a disk cage, the chances are that + it has an enclosure device. Selecting this option will just allow + certain enclosure conditions to be reported and is not required. comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" depends on SCSI @@ -341,26 +349,15 @@ config ISCSI_TCP The userspace component needed to initialize the driver, documentation, and sample configuration files can be found here: - http://linux-iscsi.sf.net + http://open-iscsi.org config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" - depends on SGI_IP22 && SCSI + depends on SGI_HAS_WD93 && SCSI help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. -config SCSI_DECNCR - tristate "DEC NCR53C94 Scsi Driver" - depends on MACH_DECSTATION && SCSI && TC - help - Say Y here to support the NCR53C94 SCSI controller chips on IOASIC - based TURBOchannel DECstations and TURBOchannel PMAZ-A cards. - -config SCSI_DECSII - tristate "DEC SII Scsi Driver" - depends on MACH_DECSTATION && SCSI && 32BIT - config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" depends on PCI && SCSI @@ -573,10 +570,10 @@ config SCSI_ARCMSR_AER source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP - tristate "HighPoint RocketRAID 3xxx Controller support" + tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" depends on SCSI && PCI help - This option enables support for HighPoint RocketRAID 3xxx + This option enables support for HighPoint RocketRAID 3xxx/4xxx controllers. To compile this driver as a module, choose M here; the module @@ -732,7 +729,7 @@ config SCSI_GDTH This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) manufactured by Intel Corporation/ICP vortex GmbH. It is documented in the kernel source in and - + . To compile this driver as a module, choose M here: the module will be called gdth. @@ -1263,17 +1260,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT not allow targets to disconnect is not reasonable if there is more than 1 device on a SCSI bus. The normal answer therefore is N. -config SCSI_MCA_53C9X - tristate "NCR MCA 53C9x SCSI support" - depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP - help - Some MicroChannel machines, notably the NCR 35xx line, use a SCSI - controller based on the NCR 53C94. This driver will allow use of - the controller on the 3550, and very possibly others. - - To compile this driver as a module, choose M here: the - module will be called mca_53c9x. - config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI @@ -1288,17 +1274,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PSI240I - tristate "PSI240i support" - depends on ISA && SCSI - help - This is support for the PSI240i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called psi240i. - config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" depends on ISA && SCSI @@ -1359,21 +1334,6 @@ config SCSI_LPFC This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. -config SCSI_SEAGATE - tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI - select CHECK_SIGNATURE - ---help--- - These are 8-bit SCSI controllers; the ST-01 is also supported by - this driver. It is explained in section 3.9 of the SCSI-HOWTO, - available from . If it - doesn't work out of the box, you may have to change some macros at - compiletime, which are described in . - - To compile this driver as a module, choose M here: the - module will be called seagate. - -# definitely looks not 64bit safe: config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on (EISA || MCA) && SCSI @@ -1626,45 +1586,6 @@ config GVP11_SCSI To compile this driver as a module, choose M here: the module will be called gvp11. -config CYBERSTORM_SCSI - tristate "CyberStorm SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with an original (MkI) Phase5 Cyberstorm - accelerator board and the optional Cyberstorm SCSI controller, - answer Y. Otherwise, say N. - -config CYBERSTORMII_SCSI - tristate "CyberStorm Mk II SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board - and the optional Cyberstorm SCSI controller, say Y. Otherwise, - answer N. - -config BLZ2060_SCSI - tristate "Blizzard 2060 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Blizzard 2060 accelerator board - and want to use the onboard SCSI controller, say Y. Otherwise, - answer N. - -config BLZ1230_SCSI - tristate "Blizzard 1230IV/1260 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard - 1260 accelerator, and the optional SCSI module, say Y. Otherwise, - say N. - -config FASTLANE_SCSI - tristate "Fastlane SCSI support" - depends on ZORRO && SCSI - help - If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use - one in the near future, say Y to this question. Otherwise, say N. - config SCSI_A4000T tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" depends on AMIGA && SCSI && EXPERIMENTAL @@ -1692,15 +1613,6 @@ config SCSI_ZORRO7XX accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. -config OKTAGON_SCSI - tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" - depends on ZORRO && SCSI && EXPERIMENTAL - help - If you have the BSC Oktagon SCSI disk controller for the Amiga, say - Y to this question. If you're in doubt about whether you have one, - see the picture at - . - config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI @@ -1753,18 +1665,6 @@ config MAC_SCSI SCSI-HOWTO, available from . -config SCSI_MAC_ESP - tristate "Macintosh NCR53c9[46] SCSI" - depends on MAC && SCSI - help - This is the NCR 53c9x SCSI controller found on most of the 68040 - based Macintoshes. If you have one of these say Y and read the - SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called mac_esp. - config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y @@ -1805,6 +1705,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" depends on SUN3X && SCSI=y + select SCSI_SPI_ATTRS help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it.