X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fide-scsi.c;h=b4ba40436c4f933a5848c998e918633bf3ee20a2;hb=85e39035ca381846b031690f4d1ac1f0660da0a2;hp=461331d3dc45f041fd23bb8c02cc0f87b6737fe8;hpb=7db9cbb3748c46b80e5c99ffa91945b8dd4ed5e5;p=linux-2.6-omap-h63xx.git diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 461331d3dc4..b4ba40436c4 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include @@ -83,7 +82,6 @@ typedef struct ide_scsi_obj { struct gendisk *disk; struct Scsi_Host *host; - struct ide_atapi_pc *pc; /* Current packet command */ unsigned long transform; /* SCSI cmd translation layer */ unsigned long log; /* log flags */ } idescsi_scsi_t; @@ -131,50 +129,6 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) return scsihost_to_idescsi(ide_drive->driver_data); } -/* - * PIO data transfer routine using the scatter gather table. - */ -static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; - char *buf; - int count; - - while (bcount) { - count = min(pc->sg->length - pc->b_count, bcount); - if (PageHighMem(sg_page(pc->sg))) { - unsigned long flags; - - local_irq_save(flags); - buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - xf(drive, NULL, buf + pc->b_count, count); - kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = sg_virt(pc->sg); - xf(drive, NULL, buf + pc->b_count, count); - } - bcount -= count; pc->b_count += count; - if (pc->b_count == pc->sg->length) { - if (!--pc->sg_cnt) - break; - pc->sg = sg_next(pc->sg); - pc->b_count = 0; - } - } - - if (bcount) { - printk(KERN_ERR "%s: scatter gather table too small, %s\n", - drive->name, write ? "padding with zeros" - : "discarding data"); - ide_pad_transfer(drive, write, bcount); - } -} - static void ide_scsi_hex_dump(u8 *data, int len) { print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); @@ -182,10 +136,10 @@ static void ide_scsi_hex_dump(u8 *data, int len) static int idescsi_end_request(ide_drive_t *, int, int); -static void ide_scsi_callback(ide_drive_t *drive) +static void ide_scsi_callback(ide_drive_t *drive, int dsc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; + struct ide_atapi_pc *pc = drive->pc; if (pc->flags & PC_FLAG_TIMEDOUT) debug_log("%s: got timed out packet %lu at %lu\n", __func__, @@ -244,9 +198,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { ide_hwif_t *hwif = drive->hwif; - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) /* force an abort */ - hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE); + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); rq->errors++; @@ -312,47 +266,23 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) spin_unlock_irqrestore(host->host_lock, flags); kfree(pc); blk_put_request(rq); - scsi->pc = NULL; + drive->pc = NULL; return 0; } -static inline unsigned long get_timeout(struct ide_atapi_pc *pc) -{ - return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); -} - -static int idescsi_expiry(ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - - debug_log("%s called for %lu at %lu\n", __func__, - pc->scsi_cmd->serial_number, jiffies); - - pc->flags |= PC_FLAG_TIMEDOUT; - - return 0; /* we do not want the ide subsystem to retry */ -} - /* * Our interrupt handler. */ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) { - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - - return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc), - idescsi_expiry, NULL, NULL, NULL, - ide_scsi_io_buffers); + return ide_pc_intr(drive, idescsi_pc_intr); } static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) { - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - - return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr, - get_timeout(scsi->pc), idescsi_expiry); + return ide_transfer_pc(drive, idescsi_pc_intr, + ide_scsi_get_timeout(drive->pc), + ide_scsi_expiry); } static inline int idescsi_set_direction(struct ide_atapi_pc *pc) @@ -397,13 +327,11 @@ static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc) static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - /* Set the current packet command */ - scsi->pc = pc; + drive->pc = pc; - return ide_issue_pc(drive, pc, idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); + return ide_issue_pc(drive, idescsi_transfer_pc, + ide_scsi_get_timeout(pc), ide_scsi_expiry); } /* @@ -430,21 +358,41 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r } #ifdef CONFIG_IDE_PROC_FS -static void idescsi_add_settings(ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); - ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); -} -#else -static inline void idescsi_add_settings(ide_drive_t *drive) { ; } +#define ide_scsi_devset_get(name, field) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ + return scsi->field; \ +} + +#define ide_scsi_devset_set(name, field) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ + scsi->field = arg; \ + return 0; \ +} + +#define ide_scsi_devset_rw_field(_name, _field) \ +ide_scsi_devset_get(_name, _field); \ +ide_scsi_devset_set(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name); + +ide_devset_rw_field(bios_cyl, bios_cyl); +ide_devset_rw_field(bios_head, bios_head); +ide_devset_rw_field(bios_sect, bios_sect); + +ide_scsi_devset_rw_field(transform, transform); +ide_scsi_devset_rw_field(log, log); + +static const struct ide_proc_devset idescsi_settings[] = { + IDE_PROC_DEVSET(bios_cyl, 0, 1023), + IDE_PROC_DEVSET(bios_head, 0, 255), + IDE_PROC_DEVSET(bios_sect, 0, 63), + IDE_PROC_DEVSET(log, 0, 1), + IDE_PROC_DEVSET(transform, 0, 3), + { 0 }, +}; #endif /* @@ -452,16 +400,18 @@ static inline void idescsi_add_settings(ide_drive_t *drive) { ; } */ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) { - if (drive->id && (drive->id->config & 0x0060) == 0x20) + if ((drive->id[ATA_ID_CONFIG] & 0x0060) == 0x20) set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags); clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); #if IDESCSI_DEBUG_LOG set_bit(IDESCSI_LOG_CMD, &scsi->log); #endif /* IDESCSI_DEBUG_LOG */ - drive->pc_callback = ide_scsi_callback; + drive->pc_callback = ide_scsi_callback; + drive->pc_update_buffers = NULL; + drive->pc_io_buffers = ide_io_buffers; - idescsi_add_settings(drive); + ide_proc_register_driver(drive, scsi->driver); } static void ide_scsi_remove(ide_drive_t *drive) @@ -503,12 +453,12 @@ static ide_driver_t idescsi_driver = { .remove = ide_scsi_remove, .version = IDESCSI_VERSION, .media = ide_scsi, - .supports_dsc_overlap = 0, .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, #ifdef CONFIG_IDE_PROC_FS .proc = idescsi_proc, + .settings = idescsi_settings, #endif }; @@ -612,7 +562,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, pc->req_xfer = pc->buf_size = scsi_bufflen(cmd); pc->scsi_cmd = cmd; pc->done = done; - pc->timeout = jiffies + cmd->timeout_per_command; + pc->timeout = jiffies + cmd->request->timeout; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); @@ -647,6 +597,8 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) int busy; int ret = FAILED; + struct ide_atapi_pc *pc; + /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) @@ -667,26 +619,27 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) spin_lock_irq(&ide_lock); /* If there is no pc running we're done (our interrupt took care of it) */ - if (!scsi->pc) { + pc = drive->pc; + if (pc == NULL) { ret = SUCCESS; goto ide_unlock; } /* It's somewhere in flight. Does ide subsystem agree? */ - if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy && - elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) { + if (pc->scsi_cmd->serial_number == cmd->serial_number && !busy && + elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != pc->rq) { /* * FIXME - not sure this condition can ever occur */ printk (KERN_ERR "ide-scsi: cmd aborted!\n"); - if (blk_sense_request(scsi->pc->rq)) - kfree(scsi->pc->buf); + if (blk_sense_request(pc->rq)) + kfree(pc->buf); /* we need to call blk_put_request twice. */ - blk_put_request(scsi->pc->rq); - blk_put_request(scsi->pc->rq); - kfree(scsi->pc); - scsi->pc = NULL; + blk_put_request(pc->rq); + blk_put_request(pc->rq); + kfree(pc); + drive->pc = NULL; ret = SUCCESS; } @@ -708,6 +661,8 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) int ready = 0; int ret = SUCCESS; + struct ide_atapi_pc *pc; + /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) @@ -722,7 +677,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) spin_lock_irq(cmd->device->host->host_lock); spin_lock(&ide_lock); - if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { + pc = drive->pc; + + if (pc == NULL || (req = pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n"); spin_unlock(&ide_lock); spin_unlock_irq(cmd->device->host->host_lock); @@ -733,9 +690,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) if (__blk_end_request(req, -EIO, 0)) BUG(); if (blk_sense_request(req)) - kfree(scsi->pc->buf); - kfree(scsi->pc); - scsi->pc = NULL; + kfree(pc->buf); + kfree(pc); + drive->pc = NULL; blk_put_request(req); /* now nuke the drive queue */ @@ -811,6 +768,7 @@ static int ide_scsi_probe(ide_drive_t *drive) struct gendisk *g; static int warned; int err = -ENOMEM; + u16 last_lun; if (!warned && drive->media == ide_cdrom) { printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n"); @@ -821,7 +779,6 @@ static int ide_scsi_probe(ide_drive_t *drive) return -ENODEV; if (!strstr("ide-scsi", drive->driver_req) || - !drive->present || drive->media == ide_disk || !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) return -ENODEV; @@ -836,12 +793,12 @@ static int ide_scsi_probe(ide_drive_t *drive) host->max_id = 1; - if (drive->id->last_lun) - debug_log("%s: id->last_lun=%u\n", drive->name, - drive->id->last_lun); + last_lun = drive->id[ATA_ID_LAST_LUN]; + if (last_lun) + debug_log("%s: last_lun=%u\n", drive->name, last_lun); - if ((drive->id->last_lun & 0x7) != 7) - host->max_lun = (drive->id->last_lun & 0x7) + 1; + if ((last_lun & 7) != 7) + host->max_lun = (last_lun & 7) + 1; else host->max_lun = 1; @@ -852,7 +809,6 @@ static int ide_scsi_probe(ide_drive_t *drive) idescsi->host = host; idescsi->disk = g; g->private_data = &idescsi->driver; - ide_proc_register_driver(drive, &idescsi_driver); err = 0; idescsi_setup(drive, idescsi); g->fops = &idescsi_ops;