X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Flibata-core.c;h=73b1f72b7e430989b261f1dd0c825d9ec02ad18e;hb=e872d4cace8681838e8d18d52c92f4870e980a08;hp=21d194c6ace38b8595b4d6fb6fcfe8fe2cdf341b;hpb=140fedb5f2efd1f23b26afb2d812004556ba9515;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 21d194c6ace..73b1f72b7e4 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1295,6 +1295,37 @@ err_out:
 	DPRINTK("EXIT, err\n");
 }
 
+
+static inline u8 ata_dev_knobble(struct ata_port *ap)
+{
+	return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
+}
+
+/**
+ * 	ata_dev_config - Run device specific handlers and check for
+ * 			 SATA->PATA bridges
+ * 	@ap: Bus 
+ * 	@i:  Device
+ *
+ * 	LOCKING:
+ */
+ 
+void ata_dev_config(struct ata_port *ap, unsigned int i)
+{
+	/* limit bridge transfers to udma5, 200 sectors */
+	if (ata_dev_knobble(ap)) {
+		printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
+			ap->id, ap->device->devno);
+		ap->udma_mask &= ATA_UDMA5;
+		ap->host->max_sectors = ATA_MAX_SECTORS;
+		ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
+		ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
+	}
+
+	if (ap->ops->dev_config)
+		ap->ops->dev_config(ap, &ap->device[i]);
+}
+
 /**
  *	ata_bus_probe - Reset and probe ATA bus
  *	@ap: Bus to probe
@@ -1322,8 +1353,7 @@ static int ata_bus_probe(struct ata_port *ap)
 		ata_dev_identify(ap, i);
 		if (ata_dev_present(&ap->device[i])) {
 			found = 1;
-			if (ap->ops->dev_config)
-				ap->ops->dev_config(ap, &ap->device[i]);
+			ata_dev_config(ap,i);
 		}
 	}
 
@@ -1378,7 +1408,9 @@ void __sata_phy_reset(struct ata_port *ap)
 	if (ap->flags & ATA_FLAG_SATA_RESET) {
 		/* issue phy wake/reset */
 		scr_write_flush(ap, SCR_CONTROL, 0x301);
-		udelay(400);			/* FIXME: a guess */
+		/* Couldn't find anything in SATA I/II specs, but
+		 * AHCI-1.1 10.4.2 says at least 1 ms. */
+		mdelay(1);
 	}
 	scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
 
@@ -1890,6 +1922,7 @@ static const char * ata_dma_blacklist [] = {
 	"HITACHI CDR-8335",
 	"HITACHI CDR-8435",
 	"Toshiba CD-ROM XM-6202B",
+	"TOSHIBA CD-ROM XM-1702BC",
 	"CD-532E-A",
 	"E-IDE CD-ROM CR-840",
 	"CD-ROM Drive/F5A",
@@ -1897,7 +1930,6 @@ static const char * ata_dma_blacklist [] = {
 	"SAMSUNG CD-ROM SC-148C",
 	"SAMSUNG CD-ROM SC",
 	"SanDisk SDP3B-64",
-	"SAMSUNG CD-ROM SN-124",
 	"ATAPI CD-ROM DRIVE 40X MAXIMUM",
 	"_NEC DV5800A",
 };
@@ -2577,7 +2609,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
 next_sg:
 	sg = &qc->sg[qc->cursg];
 
-next_page:
 	page = sg->page;
 	offset = sg->offset + qc->cursg_ofs;
 
@@ -2585,6 +2616,7 @@ next_page:
 	page = nth_page(page, (offset >> PAGE_SHIFT));
 	offset %= PAGE_SIZE;
 
+	/* don't overrun current sg */
 	count = min(sg->length - qc->cursg_ofs, bytes);
 
 	/* don't cross page boundaries */
@@ -2609,8 +2641,6 @@ next_page:
 	kunmap(page);
 
 	if (bytes) {
-		if (qc->cursg_ofs < sg->length)
-			goto next_page;
 		goto next_sg;
 	}
 }
@@ -2836,7 +2866,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
 	if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
 		struct scsi_cmnd *cmd = qc->scsicmd;
 
-		if (!scsi_eh_eflags_chk(cmd, SCSI_EH_CANCEL_CMD)) {
+		if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
 
 			/* finish completing original command */
 			__ata_qc_complete(qc);
@@ -3720,7 +3750,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
 	host->max_channel = 1;
 	host->unique_id = ata_unique_id++;
 	host->max_cmd_len = 12;
-	scsi_set_device(host, ent->dev);
+
 	scsi_assign_lock(host, &host_set->lock);
 
 	ap->flags = ATA_FLAG_PORT_DISABLED;
@@ -4408,6 +4438,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_release);
 EXPORT_SYMBOL_GPL(ata_host_intr);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_id_string);
+EXPORT_SYMBOL_GPL(ata_dev_config);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 #ifdef CONFIG_PCI