X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fscsi_scan.c;h=18486b51668da7a3591c3112e4eb18ca123a0c8b;hb=574c3fdae3890e60f8bc59e8107686944ba1e446;hp=34d0de6cd51123cb42d7cda2bc4b62a2f5151c9b;hpb=b262e60309e1b0eb25d300c7e739427d5316abb1;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 34d0de6cd51..18486b51668 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -216,7 +216,7 @@ static void scsi_unlock_floptical(struct scsi_device *sdev,
 	scsi_cmd[4] = 0x2a;     /* size */
 	scsi_cmd[5] = 0;
 	scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
-			 SCSI_TIMEOUT, 3);
+			 SCSI_TIMEOUT, 3, NULL);
 }
 
 /**
@@ -419,6 +419,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 	dev->type = &scsi_target_type;
 	starget->id = id;
 	starget->channel = channel;
+	starget->can_queue = 0;
 	INIT_LIST_HEAD(&starget->siblings);
 	INIT_LIST_HEAD(&starget->devices);
 	starget->state = STARGET_CREATED;
@@ -572,6 +573,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 	/* Each pass gets up to three chances to ignore Unit Attention */
 	for (count = 0; count < 3; ++count) {
+		int resid;
+
 		memset(scsi_cmd, 0, 6);
 		scsi_cmd[0] = INQUIRY;
 		scsi_cmd[4] = (unsigned char) try_inquiry_len;
@@ -580,7 +583,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 		result = scsi_execute_req(sdev,  scsi_cmd, DMA_FROM_DEVICE,
 					  inq_result, try_inquiry_len, &sshdr,
-					  HZ / 2 + HZ * scsi_inq_timeout, 3);
+					  HZ / 2 + HZ * scsi_inq_timeout, 3,
+					  &resid);
 
 		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
 				"with code 0x%x\n",
@@ -601,6 +605,14 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 				    (sshdr.ascq == 0))
 					continue;
 			}
+		} else {
+			/*
+			 * if nothing was transferred, we try
+			 * again. It's a workaround for some USB
+			 * devices.
+			 */
+			if (resid == try_inquiry_len)
+				continue;
 		}
 		break;
 	}
@@ -730,6 +742,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		int *bflags, int async)
 {
+	int ret;
+
 	/*
 	 * XXX do not save the inquiry, since it can change underneath us,
 	 * save just vendor/model/rev.
@@ -885,7 +899,17 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 	/* set the device running here so that slave configure
 	 * may do I/O */
-	scsi_device_set_state(sdev, SDEV_RUNNING);
+	ret = scsi_device_set_state(sdev, SDEV_RUNNING);
+	if (ret) {
+		ret = scsi_device_set_state(sdev, SDEV_BLOCK);
+
+		if (ret) {
+			sdev_printk(KERN_ERR, sdev,
+				    "in wrong state %s to complete scan\n",
+				    scsi_device_state_name(sdev->sdev_state));
+			return SCSI_SCAN_NO_RESPONSE;
+		}
+	}
 
 	if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
 		sdev->use_192_bytes_for_3f = 1;
@@ -899,7 +923,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	transport_configure_device(&sdev->sdev_gendev);
 
 	if (sdev->host->hostt->slave_configure) {
-		int ret = sdev->host->hostt->slave_configure(sdev);
+		ret = sdev->host->hostt->slave_configure(sdev);
 		if (ret) {
 			/*
 			 * if LLDD reports slave not present, don't clutter
@@ -994,7 +1018,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 */
 	sdev = scsi_device_lookup_by_target(starget, lun);
 	if (sdev) {
-		if (rescan || sdev->sdev_state != SDEV_CREATED) {
+		if (rescan || !scsi_device_created(sdev)) {
 			SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
 				"scsi scan: device exists on %s\n",
 				sdev->sdev_gendev.bus_id));
@@ -1377,7 +1401,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 
 		result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
 					  lun_data, length, &sshdr,
-					  SCSI_TIMEOUT + 4 * HZ, 3);
+					  SCSI_TIMEOUT + 4 * HZ, 3, NULL);
 
 		SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
 				" %s (try %d) result 0x%x\n", result
@@ -1467,7 +1491,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	kfree(lun_data);
  out:
 	scsi_device_put(sdev);
-	if (sdev->sdev_state == SDEV_CREATED)
+	if (scsi_device_created(sdev))
 		/*
 		 * the sdev we used didn't appear in the report luns scan
 		 */