X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F21285.c;h=6a48dfa1efe8552fcaa8453d0800a2d58437c764;hb=b0a239da17beb34354181bebb744c0b0d534967f;hp=221999bcf8fe3809b943e4f11c53ba4529810f52;hpb=a62e68488dd5ddb07776555fd7e0435c6d021ac1;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 221999bcf8f..6a48dfa1efe 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/char/21285.c
+ * linux/drivers/serial/21285.c
  *
  * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
  *
@@ -7,7 +7,6 @@
  *
  *  $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
@@ -86,7 +85,7 @@ static void serial21285_enable_ms(struct uart_port *port)
 {
 }
 
-static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
 	struct tty_struct *tty = port->info->tty;
@@ -124,7 +123,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
 	struct circ_buf *xmit = &port->info->xmit;
@@ -215,8 +214,8 @@ static void serial21285_shutdown(struct uart_port *port)
 }
 
 static void
-serial21285_set_termios(struct uart_port *port, struct termios *termios,
-			struct termios *old)
+serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
+			struct ktermios *old)
 {
 	unsigned long flags;
 	unsigned int baud, quot, h_lcr;
@@ -278,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct termios *termios,
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
 
+	tty_encode_baud_rate(tty,  baud, baud);
+
 	/*
 	 * Which character status flags should we ignore?
 	 */
@@ -362,11 +363,11 @@ static struct uart_ops serial21285_ops = {
 
 static struct uart_port serial21285_port = {
 	.mapbase	= 0x42000160,
-	.iotype		= SERIAL_IO_MEM,
+	.iotype		= UPIO_MEM,
 	.irq		= NO_IRQ,
 	.fifosize	= 16,
 	.ops		= &serial21285_ops,
-	.flags		= ASYNC_BOOT_AUTOCONF,
+	.flags		= UPF_BOOT_AUTOCONF,
 };
 
 static void serial21285_setup_ports(void)
@@ -375,23 +376,18 @@ static void serial21285_setup_ports(void)
 }
 
 #ifdef CONFIG_SERIAL_21285_CONSOLE
+static void serial21285_console_putchar(struct uart_port *port, int ch)
+{
+	while (*CSR_UARTFLG & 0x20)
+		barrier();
+	*CSR_UARTDR = ch;
+}
 
 static void
 serial21285_console_write(struct console *co, const char *s,
 			  unsigned int count)
 {
-	int i;
-
-	for (i = 0; i < count; i++) {
-		while (*CSR_UARTFLG & 0x20)
-			barrier();
-		*CSR_UARTDR = s[i];
-		if (s[i] == '\n') {
-			while (*CSR_UARTFLG & 0x20)
-				barrier();
-			*CSR_UARTDR = '\r';
-		}
-	}
+	uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
 }
 
 static void __init
@@ -484,7 +480,6 @@ static struct uart_driver serial21285_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "ttyFB",
 	.dev_name		= "ttyFB",
-	.devfs_name             = "ttyFB",
 	.major			= SERIAL_21285_MAJOR,
 	.minor			= SERIAL_21285_MINOR,
 	.nr			= 1,