X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F8250_gsc.c;h=4eb7437a404a5fa5e4c4d8087d040a55891a2eb8;hb=51dd660a2cd6eab4d470cfe1009c7f473832b786;hp=8b4947933d9bcf74d4717a030ec1dd4935d77e4b;hpb=3d5271f9883cba7b54762bc4fe027d4172f06db7;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 8b4947933d9..4eb7437a404 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -22,12 +22,10 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/io.h>
-#include <asm/serial.h> /* for LASI_BASE_BAUD */
 
 #include "8250.h"
 
-static int __init 
-serial_init_chip(struct parisc_device *dev)
+static int __init serial_init_chip(struct parisc_device *dev)
 {
 	struct uart_port port;
 	unsigned long address;
@@ -39,33 +37,36 @@ serial_init_chip(struct parisc_device *dev)
 		 * what we have here is a missing parent device, so tell
 		 * the user what they're missing.
 		 */
-		if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
-			printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
+		if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
+			printk(KERN_INFO
+				"Serial: device 0x%lx not configured.\n"
 				"Enable support for Wax, Lasi, Asp or Dino.\n",
 				dev->hpa.start);
-		}
 		return -ENODEV;
 	}
 
 	address = dev->hpa.start;
-	if (dev->id.sversion != 0x8d) {
+	if (dev->id.sversion != 0x8d)
 		address += 0x800;
-	}
 
-	memset(&port, 0, sizeof(struct uart_port));
-	port.mapbase = address;
-	port.irq = dev->irq;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-	port.uartclk = LASI_BASE_BAUD * 16;
-	port.dev = &dev->dev;
+	memset(&port, 0, sizeof(port));
+	port.iotype	= UPIO_MEM;
+	/* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
+	port.uartclk	= 7272727;
+	port.mapbase	= address;
+	port.membase	= ioremap_nocache(address, 16);
+	port.irq	= dev->irq;
+	port.flags	= UPF_BOOT_AUTOCONF;
+	port.dev	= &dev->dev;
 
 	err = serial8250_register_port(&port);
 	if (err < 0) {
-		printk(KERN_WARNING "serial8250_register_port returned error %d\n", err);
+		printk(KERN_WARNING
+			"serial8250_register_port returned error %d\n", err);
+		iounmap(port.membase);
 		return err;
 	}
-        
+
 	return 0;
 }