X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2FKconfig;h=2978c09860eeff81cbedebf0c52ca8e142bf946c;hb=1863100a0244828f78e5e47b22b93ca912e80963;hp=0b71e7d18903ddd6d36e1d859cde23beee02c891;hpb=f1877fb2967ec8c0c6e946cc24c253bb52ce4d06;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b71e7d1890..2978c09860e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS
 	  say N here to save some memory. You can also say Y if you have an
 	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
 
-config SERIAL_8250_SHARE_IRQ
-	bool "Support for sharing serial interrupts"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some serial boards have hardware support which allows multiple dumb
-	  serial ports on the same board to share a single IRQ. To enable
-	  support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
-	bool "Autodetect IRQ on standard ports (unsafe)"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Say Y here if you want the kernel to try to guess which IRQ
-	  to use for your serial port.
-
-	  This is considered unsafe; it is far better to configure the IRQ in
-	  a boot script using the setserial command.
-
-	  If unsure, say N.
-
-config SERIAL_8250_RSA
-	bool "Support RSA serial ports"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  ::: To be written :::
-
 #
 # Multi-port serial cards
 #
@@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_accent.
 
-
 config SERIAL_8250_BOCA
 	tristate "Support Boca cards"
 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -210,6 +183,17 @@ config SERIAL_8250_BOCA
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_boca.
 
+config SERIAL_8250_EXAR_ST16C554
+	tristate "Support Exar ST16C554/554D Quad UART"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
+	  tinkering with your Envoy TU301, or have a machine with this UART,
+	  say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_exar_st16c554.
+
 config SERIAL_8250_HUB6
 	tristate "Support Hub6 cards"
 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -219,6 +203,32 @@ config SERIAL_8250_HUB6
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_hub6.
 
+config SERIAL_8250_SHARE_IRQ
+	bool "Support for sharing serial interrupts"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Some serial boards have hardware support which allows multiple dumb
+	  serial ports on the same board to share a single IRQ. To enable
+	  support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+	bool "Autodetect IRQ on standard ports (unsafe)"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Say Y here if you want the kernel to try to guess which IRQ
+	  to use for your serial port.
+
+	  This is considered unsafe; it is far better to configure the IRQ in
+	  a boot script using the setserial command.
+
+	  If unsure, say N.
+
+config SERIAL_8250_RSA
+	bool "Support RSA serial ports"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  ::: To be written :::
+
 config SERIAL_8250_MCA
 	tristate "Support 8250-type ports on MCA buses"
 	depends on SERIAL_8250 != n && MCA
@@ -511,6 +521,25 @@ config SERIAL_IMX_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+config SERIAL_UARTLITE
+	tristate "Xilinx uartlite serial port support"
+	depends on PPC32
+	select SERIAL_CORE
+	help
+	  Say Y here if you want to use the Xilinx uartlite serial controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uartlite.ko.
+
+config SERIAL_UARTLITE_CONSOLE
+	bool "Support for console on Xilinx uartlite serial port"
+	depends on SERIAL_UARTLITE=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Say Y here if you wish to use a Xilinx uartlite as the system
+	  console (the system console is the device which receives all kernel
+	  messages and warnings and which allows logins in single user mode).
+
 config SERIAL_SUNCORE
 	bool
 	depends on SPARC
@@ -634,7 +663,7 @@ config V850E_UART
 
 config V850E_UARTB
         bool
-	depends V850E_UART && V850E_ME2
+	depends on V850E_UART && V850E_ME2
 	default y
 
 config V850E_UART_CONSOLE
@@ -880,7 +909,7 @@ config SERIAL_M32R_PLDSIO
 
 config SERIAL_TXX9
 	bool "TMPTX39XX/49XX SIO support"
-	depends HAS_TXX9_SERIAL
+	depends on HAS_TXX9_SERIAL
 	select SERIAL_CORE
 	default y