X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2Fioc4_serial.c;h=6bab63cd5b2910298b1d547b87f3c01c2311f4cd;hb=acee709cab689ec7703770e8b8cb5cc3a4abcb31;hp=0c179384fb0cae34049bda432e8f349a910d3694;hpb=f630fe2817601314b2eb7ca5ddc23c7834646731;p=linux-2.6-omap-h63xx.git diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 0c179384fb0..6bab63cd5b2 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -889,7 +889,7 @@ static int inline port_init(struct ioc4_port *port) ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", - __FUNCTION__, ring_pci_addr)); + __func__, ring_pci_addr)); writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); @@ -1028,7 +1028,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg) spin_lock_irqsave(&soft->is_ir_lock, flag); printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " "other_ir 0x%x other_ies 0x%x mask 0x%x\n", - __FUNCTION__, __LINE__, + __func__, __LINE__, (void *)mem, readl(&mem->sio_ir.raw), readl(&mem->sio_ies.raw), readl(&mem->other_ir.raw), @@ -1155,14 +1155,14 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd) (TOTAL_RING_BUF_SIZE - 1)) == 0)); DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " "ip_dma_ringbuf 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_cpu_ringbuf, (void *)port->ip_dma_ringbuf)); port->ip_inring = RING(port, RX_0_OR_2); port->ip_outring = RING(port, TX_0_OR_2); } DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", - __FUNCTION__, + __func__, port_number, (void *)port, (void *)control)); DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", (void *)port->ip_serial_regs, @@ -1173,7 +1173,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd) DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " "outring 0x%p\n", - __FUNCTION__, + __func__, port_number, (void *)port, (void *)port->ip_inring, (void *)port->ip_outring)); @@ -1317,7 +1317,7 @@ config_port(struct ioc4_port *port, int spiniter = 0; DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", - __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd)); + __func__, baud, byte_size, stop_bits, parenb, parodd)); if (set_baud(port, baud)) return 1; @@ -1635,7 +1635,7 @@ static void transmit_chars(struct uart_port *the_port) return; info = the_port->info; - tty = info->tty; + tty = info->port.tty; if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) { /* Nothing to do or hw stopped */ @@ -1725,7 +1725,7 @@ ioc4_change_speed(struct uart_port *the_port, } baud = uart_get_baud_rate(the_port, new_termios, old_termios, MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud)); + DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); /* default is 9600 */ if (!baud) @@ -1738,14 +1738,14 @@ ioc4_change_speed(struct uart_port *the_port, the_port->ignore_status_mask = N_ALL_INPUT; - info->tty->low_latency = 1; + info->port.tty->low_latency = 1; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(info->port.tty)) the_port->ignore_status_mask &= ~(N_PARITY_ERROR | N_FRAMING_ERROR); - if (I_IGNBRK(info->tty)) { + if (I_IGNBRK(info->port.tty)) { the_port->ignore_status_mask &= ~N_BREAK; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(info->port.tty)) the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; } if (!(cflag & CREAD)) { @@ -1765,7 +1765,7 @@ ioc4_change_speed(struct uart_port *the_port, DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " "config_port(baud %d data %d stop %d p enable %d parity %d)," " notification 0x%x\n", - __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop, + __func__, (void *)port, cflag, baud, new_data, new_stop, new_parity_enable, new_parity, the_port->ignore_status_mask)); if ((config_port(port, baud, /* baud */ @@ -1801,7 +1801,8 @@ static inline int ic4_startup_local(struct uart_port *the_port) ioc4_set_proto(port, the_port->mapbase); /* set the speed of the serial port */ - ioc4_change_speed(the_port, info->tty->termios, (struct ktermios *)0); + ioc4_change_speed(the_port, info->port.tty->termios, + (struct ktermios *)0); return 0; } @@ -2346,11 +2347,11 @@ static void receive_chars(struct uart_port *the_port) /* Make sure all the pointers are "good" ones */ if (!info) return; - if (!info->tty) + if (!info->port.tty) return; spin_lock_irqsave(&the_port->lock, pflags); - tty = info->tty; + tty = info->port.tty; request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); @@ -2440,8 +2441,8 @@ static void ic4_shutdown(struct uart_port *the_port) wake_up_interruptible(&info->delta_msr_wait); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); spin_lock_irqsave(&the_port->lock, port_flags); set_notification(port, N_ALL, 0); @@ -2715,7 +2716,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", - __FUNCTION__, pdev, (void *)control)); + __func__, pdev, (void *)control)); if (!control) return -ENODEV; @@ -2734,7 +2735,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) port->ip_all_ports[port_type_idx] = the_port; DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", - __FUNCTION__, (void *)the_port, + __func__, (void *)the_port, (void *)port, port_type == PROTO_RS232 ? "rs232" : "rs422")); @@ -2752,7 +2753,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) if (uart_add_one_port(u_driver, the_port) < 0) { printk(KERN_WARNING "%s: unable to add port %d bus %d\n", - __FUNCTION__, the_port->line, pdev->bus->number); + __func__, the_port->line, pdev->bus->number); } else { DPRINT_CONFIG( ("IOC4 serial port %d irq = %d, bus %d\n", @@ -2777,7 +2778,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) int ret = 0; - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, idd->idd_pci_id)); /* PCI-RT does not bring out serial connections. @@ -2806,7 +2807,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) goto out2; } DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __FUNCTION__, (void *)idd->idd_misc_regs, + __func__, (void *)idd->idd_misc_regs, (void *)serial)); /* Get memory for the new card */ @@ -2858,7 +2859,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) } else { printk(KERN_WARNING "%s : request_irq fails for IRQ 0x%x\n ", - __FUNCTION__, idd->idd_pdev->irq); + __func__, idd->idd_pdev->irq); } ret = ioc4_attach_local(idd); if (ret) @@ -2911,13 +2912,13 @@ int ioc4_serial_init(void) if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs232 IOC4 serial driver\n", - __FUNCTION__); + __func__); return ret; } if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs422 IOC4 serial driver\n", - __FUNCTION__); + __func__); return ret; }