X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fspi%2Fspi_s3c24xx_gpio.c;h=82ae7d7eca386bafffa0c7ee7eb8b4c1388630dc;hb=e5e54bc86a1fed9849b22fd736c30b23c4719046;hp=eda53ed04cbc9cbefc3569762a5ce965c669a243;hpb=975a8e3ed2b9eab9f062a1e0ba7fe180e15204e1;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index eda53ed04cb..82ae7d7eca3 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -73,6 +73,19 @@ static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
 	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
 }
 
+static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+
 static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
 {
 	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
@@ -83,10 +96,10 @@ static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
 
 static int s3c2410_spigpio_probe(struct platform_device *dev)
 {
+	struct s3c2410_spigpio_info *info;
 	struct spi_master	*master;
 	struct s3c2410_spigpio  *sp;
 	int ret;
-	int i;
 
 	master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
 	if (master == NULL) {
@@ -100,38 +113,35 @@ static int s3c2410_spigpio_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, sp);
 
 	/* copy in the plkatform data */
-	sp->info = dev->dev.platform_data;
+	info = sp->info = dev->dev.platform_data;
 
 	/* setup spi bitbang adaptor */
 	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.master->bus_num = info->bus_num;
 	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
 	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3;
+
+	/* set state of spi pins, always assume that the clock is
+	 * available, but do check the MOSI and MISO. */
+	s3c2410_gpio_setpin(info->pin_clk, 0);
+	s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT);
 
-	/* set state of spi pins */
-	s3c2410_gpio_setpin(sp->info->pin_clk, 0);
-	s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+	if (info->pin_mosi < S3C2410_GPH10) {
+		s3c2410_gpio_setpin(info->pin_mosi, 0);
+		s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT);
+	}
 
-	s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+	if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10)
+		s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT);
 
 	ret = spi_bitbang_start(&sp->bitbang);
 	if (ret)
 		goto err_no_bitbang;
 
-	/* register the chips to go with the board */
-
-	for (i = 0; i < sp->info->board_size; i++) {
-		dev_info(&dev->dev, "registering %p: %s\n",
-			 &sp->info->board_info[i],
-			 sp->info->board_info[i].modalias);
-
-		sp->info->board_info[i].controller_data = sp;
-		spi_new_device(master, sp->info->board_info + i);
-	}
-
 	return 0;
 
  err_no_bitbang:
@@ -165,7 +175,7 @@ static struct platform_driver s3c2410_spigpio_drv = {
         .suspend	= s3c2410_spigpio_suspend,
         .resume		= s3c2410_spigpio_resume,
         .driver		= {
-		.name	= "s3c24xx-spi-gpio",
+		.name	= "spi_s3c24xx_gpio",
 		.owner	= THIS_MODULE,
         },
 };