X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fgadget%2Fm66592-udc.c;h=ee6b35fa870f9ef6ff9807b2abf33a7400da4861;hb=f34c32f13ce8c539f3f582562358e39a86b00e83;hp=700dda8a91579666cf04af70416e2dae6fb01912;hpb=5e16e3f0e24dadb79b96b6134cd3303f0d42f0c5;p=linux-2.6-omap-h63xx.git diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 700dda8a915..ee6b35fa870 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include "m66592-udc.h" @@ -35,10 +35,16 @@ MODULE_DESCRIPTION("M66592 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:m66592_udc"); -#define DRIVER_VERSION "29 May 2007" +#define DRIVER_VERSION "18 Oct 2007" /* module parameters */ +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +static unsigned short endian = M66592_LITTLE; +module_param(endian, ushort, 0644); +MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)"); +#else static unsigned short clock = M66592_XTAL24; module_param(clock, ushort, 0644); MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 " @@ -56,6 +62,7 @@ static unsigned short irq_sense = M66592_INTL; module_param(irq_sense, ushort, 0644); MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 " "(default=2)"); +#endif static const char udc_name[] = "m66592_udc"; static const char *m66592_ep_name[] = { @@ -141,7 +148,7 @@ static inline u16 control_reg_get_pid(struct m66592 *m66592, u16 pipenum) offset = get_pipectr_addr(pipenum); pid = m66592_read(m66592, offset) & M66592_PID; } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + pr_err("unexpect pipe num (%d)\n", pipenum); return pid; } @@ -157,7 +164,7 @@ static inline void control_reg_set_pid(struct m66592 *m66592, u16 pipenum, offset = get_pipectr_addr(pipenum); m66592_mdfy(m66592, pid, M66592_PID, offset); } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + pr_err("unexpect pipe num (%d)\n", pipenum); } static inline void pipe_start(struct m66592 *m66592, u16 pipenum) @@ -186,7 +193,7 @@ static inline u16 control_reg_get(struct m66592 *m66592, u16 pipenum) offset = get_pipectr_addr(pipenum); ret = m66592_read(m66592, offset); } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + pr_err("unexpect pipe num (%d)\n", pipenum); return ret; } @@ -203,7 +210,7 @@ static inline void control_reg_sqclr(struct m66592 *m66592, u16 pipenum) offset = get_pipectr_addr(pipenum); m66592_bset(m66592, M66592_SQCLR, offset); } else - printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum); + pr_err("unexpect pipe num(%d)\n", pipenum); } static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum) @@ -285,7 +292,7 @@ static int pipe_buffer_setting(struct m66592 *m66592, break; } if (m66592->bi_bufnum > M66592_MAX_BUFNUM) { - printk(KERN_ERR "m66592 pipe memory is insufficient(%d)\n", + pr_err("m66592 pipe memory is insufficient(%d)\n", m66592->bi_bufnum); return -ENOMEM; } @@ -326,7 +333,7 @@ static void pipe_buffer_release(struct m66592 *m66592, if (info->type == M66592_BULK) m66592->bulk--; } else - printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n", + pr_err("ep_release: unexpect pipenum (%d)\n", info->pipe); } @@ -360,6 +367,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D0FIFOSEL; ep->fifoctr = M66592_D0FIFOCTR; ep->fifotrn = M66592_D0FIFOTRN; +#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) } else if (m66592->num_dma == 1) { m66592->num_dma++; ep->use_dma = 1; @@ -367,6 +375,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D1FIFOSEL; ep->fifoctr = M66592_D1FIFOCTR; ep->fifotrn = M66592_D1FIFOTRN; +#endif } else { ep->use_dma = 0; ep->fifoaddr = M66592_CFIFO; @@ -422,7 +431,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, case USB_ENDPOINT_XFER_BULK: if (m66592->bulk >= M66592_MAX_NUM_BULK) { if (m66592->isochronous >= M66592_MAX_NUM_ISOC) { - printk(KERN_ERR "bulk pipe is insufficient\n"); + pr_err("bulk pipe is insufficient\n"); return -ENODEV; } else { info.pipe = M66592_BASE_PIPENUM_ISOC @@ -438,7 +447,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, break; case USB_ENDPOINT_XFER_INT: if (m66592->interrupt >= M66592_MAX_NUM_INT) { - printk(KERN_ERR "interrupt pipe is insufficient\n"); + pr_err("interrupt pipe is insufficient\n"); return -ENODEV; } info.pipe = M66592_BASE_PIPENUM_INT + m66592->interrupt; @@ -447,7 +456,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, break; case USB_ENDPOINT_XFER_ISOC: if (m66592->isochronous >= M66592_MAX_NUM_ISOC) { - printk(KERN_ERR "isochronous pipe is insufficient\n"); + pr_err("isochronous pipe is insufficient\n"); return -ENODEV; } info.pipe = M66592_BASE_PIPENUM_ISOC + m66592->isochronous; @@ -455,7 +464,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, counter = &m66592->isochronous; break; default: - printk(KERN_ERR "unexpect xfer type\n"); + pr_err("unexpect xfer type\n"); return -EINVAL; } ep->type = info.type; @@ -470,7 +479,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, ret = pipe_buffer_setting(m66592, &info); if (ret < 0) { - printk(KERN_ERR "pipe_buffer_setting fail\n"); + pr_err("pipe_buffer_setting fail\n"); return ret; } @@ -606,11 +615,33 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req) control_end(ep->m66592, 0); break; default: - printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq); + pr_err("start_ep0: unexpect ctsq(%x)\n", ctsq); break; } } +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +static void init_controller(struct m66592 *m66592) +{ + usbf_start_clock(); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + /* This is a workaound for SH7722 2nd cut */ + m66592_bset(m66592, 0x8000, M66592_DVSTCTR); + m66592_bset(m66592, 0x1000, M66592_TESTMODE); + m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); + + m66592_bset(m66592, M66592_INTL, M66592_INTENB1); + + m66592_write(m66592, 0, M66592_CFBCFG); + m66592_write(m66592, 0, M66592_D0FBCFG); + m66592_bset(m66592, endian, M66592_CFBCFG); + m66592_bset(m66592, endian, M66592_D0FBCFG); +} +#else /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void init_controller(struct m66592 *m66592) { m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND), @@ -636,9 +667,13 @@ static void init_controller(struct m66592 *m66592) m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, M66592_DMA0CFG); } +#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void disable_controller(struct m66592 *m66592) { +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + usbf_stop_clock(); +#else m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); udelay(1); m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); @@ -646,15 +681,20 @@ static void disable_controller(struct m66592 *m66592) m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); udelay(1); m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); +#endif } static void m66592_start_xclock(struct m66592 *m66592) { +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + usbf_start_clock(); +#else u16 tmp; tmp = m66592_read(m66592, M66592_SYSCFG); if (!(tmp & M66592_XCKE)) m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); +#endif } /*-------------------------------------------------------------------------*/ @@ -709,7 +749,7 @@ static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req) do { tmp = m66592_read(m66592, ep->fifoctr); if (i++ > 100000) { - printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus" + pr_err("pipe0 is busy. maybe cpu i/o bus " "conflict. please power off this controller."); return; } @@ -759,7 +799,7 @@ static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req) if (unlikely((tmp & M66592_FRDY) == 0)) { pipe_stop(m66592, pipenum); pipe_irq_disable(m66592, pipenum); - printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum); + pr_err("write fifo not ready. pipnum=%d\n", pipenum); return; } @@ -808,7 +848,7 @@ static void irq_packet_read(struct m66592_ep *ep, struct m66592_request *req) req->req.status = -EPIPE; pipe_stop(m66592, pipenum); pipe_irq_disable(m66592, pipenum); - printk(KERN_ERR "read fifo not ready"); + pr_err("read fifo not ready"); return; } @@ -1063,7 +1103,7 @@ static void m66592_update_usb_speed(struct m66592 *m66592) break; default: m66592->gadget.speed = USB_SPEED_UNKNOWN; - printk(KERN_ERR "USB speed unknown\n"); + pr_err("USB speed unknown\n"); } } @@ -1122,7 +1162,7 @@ __acquires(m66592->lock) control_end(m66592, 0); break; default: - printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq); + pr_err("ctrl_stage: unexpect ctsq(%x)\n", ctsq); break; } } @@ -1142,6 +1182,19 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + if (!intsts0 && !intenb0) { + /* + * When USB clock stops, it cannot read register. Even if a + * clock stops, the interrupt occurs. So this driver turn on + * a clock by this timing and do re-reading of register. + */ + m66592_start_xclock(m66592); + intsts0 = m66592_read(m66592, M66592_INTSTS0); + intenb0 = m66592_read(m66592, M66592_INTENB0); + } +#endif + savepipe = m66592_read(m66592, M66592_CFIFOSEL); mask0 = intsts0 & intenb0; @@ -1299,7 +1352,7 @@ static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == 0) /* control */ + if (ep->desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) @@ -1409,13 +1462,13 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) retval = device_add(&m66592->gadget.dev); if (retval) { - printk(KERN_ERR "device_add error (%d)\n", retval); + pr_err("device_add error (%d)\n", retval); goto error; } retval = driver->bind (&m66592->gadget); if (retval) { - printk(KERN_ERR "bind to driver error (%d)\n", retval); + pr_err("bind to driver error (%d)\n", retval); device_del(&m66592->gadget.dev); goto error; } @@ -1456,6 +1509,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); driver->unbind(&m66592->gadget); + m66592->gadget.dev.driver = NULL; init_controller(m66592); disable_controller(m66592); @@ -1485,6 +1539,7 @@ static int __exit m66592_remove(struct platform_device *pdev) iounmap(m66592->reg); free_irq(platform_get_irq(pdev, 0), m66592); m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); + usbf_stop_clock(); kfree(m66592); return 0; } @@ -1508,28 +1563,28 @@ static int __init m66592_probe(struct platform_device *pdev) (char *)udc_name); if (!res) { ret = -ENODEV; - printk(KERN_ERR "platform_get_resource_byname error.\n"); + pr_err("platform_get_resource_byname error.\n"); goto clean_up; } irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENODEV; - printk(KERN_ERR "platform_get_irq error.\n"); + pr_err("platform_get_irq error.\n"); goto clean_up; } reg = ioremap(res->start, resource_len(res)); if (reg == NULL) { ret = -ENOMEM; - printk(KERN_ERR "ioremap error.\n"); + pr_err("ioremap error.\n"); goto clean_up; } /* initialize ucd */ m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { - printk(KERN_ERR "kzalloc error\n"); + pr_err("kzalloc error\n"); goto clean_up; } @@ -1555,7 +1610,7 @@ static int __init m66592_probe(struct platform_device *pdev) ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED, udc_name, m66592); if (ret < 0) { - printk(KERN_ERR "request_irq error (%d)\n", ret); + pr_err("request_irq error (%d)\n", ret); goto clean_up; } @@ -1617,6 +1672,7 @@ static struct platform_driver m66592_driver = { .remove = __exit_p(m66592_remove), .driver = { .name = (char *) udc_name, + .owner = THIS_MODULE, }, };