X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2FKconfig;h=d6d8e7edc1e66271227558bf355eb254ee50f6d4;hb=cb170dcdce58de20b045ae964a4ccfc29aad1647;hp=d97b16b52efa051f39c3d2fd1cf97a1b961a58d6;hpb=70ec75c5b8e0bda7a16fb387f91e08545f379a0e;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d97b16b52ef..d6d8e7edc1e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -4,6 +4,19 @@
 comment "USB Host Controller Drivers"
 	depends on USB
 
+config USB_C67X00_HCD
+	tristate "Cypress C67x00 HCD support"
+	depends on USB
+	help
+	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+	  host/peripheral/OTG USB controllers.
+
+	  Enable this option to support this chip in host controller mode.
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called c67x00.
+
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
 	depends on USB && USB_ARCH_HAS_EHCI
@@ -28,10 +41,29 @@ config USB_EHCI_HCD
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ehci-hcd.
+choice
+	prompt "PHY/TLL mode"
+	depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX
+	---help---
+	Choose PHY or TLL mode of operation
+
+config OMAP_EHCI_PHY_MODE
+	bool "PHY mode: ISP1504 on Port1/2 (NEW 3430ES2.0)"
+	depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX
+	---help---
+	  EHCI PHY mode. Port1 and Port2 are connected to ISP1504 transcievers
+
+config OMAP_EHCI_TLL_MODE
+	bool "TLL mode: (EXPERIMENTAL)"
+	depends on USB_EHCI_HCD && EXPERIMENTAL && ARCH_OMAP34XX
+	---help---
+	OMAP EHCI controller has TLL mode of operation for all 3 ports.
+	Use this mode when no transciever is present
+endchoice
 
 config USB_EHCI_ROOT_HUB_TT
-	bool "Root Hub Transaction Translators (EXPERIMENTAL)"
-	depends on USB_EHCI_HCD && EXPERIMENTAL
+	bool "Root Hub Transaction Translators"
+	depends on USB_EHCI_HCD
 	---help---
 	  Some EHCI chips have vendor-specific extensions to integrate
 	  transaction translators, so that no OHCI or UHCI companion
@@ -69,10 +101,9 @@ config USB_EHCI_BIG_ENDIAN_DESC
 	default y
 
 config USB_EHCI_FSL
-	bool
-	depends on USB_EHCI_HCD
+	bool "Support for Freescale on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && FSL_SOC
 	select USB_EHCI_ROOT_HUB_TT
-	default y if MPC834x || PPC_MPC831x
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
@@ -96,6 +127,32 @@ config USB_ISP116X_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp116x-hcd.
 
+config USB_ISP1760_HCD
+	tristate "ISP 1760 HCD support"
+	depends on USB && EXPERIMENTAL
+	---help---
+	  The ISP1760 chip is a USB 2.0 host controller.
+
+	  This driver does not support isochronous transfers or OTG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+	bool "Support for the PCI bus"
+	depends on USB_ISP1760_HCD && PCI
+	---help---
+	  Enables support for the device present on the PCI bus.
+	  This should only be required if you happen to have the eval kit from
+	  NXP and you are going to test it.
+
+config USB_ISP1760_OF
+	bool "Support for the OF platform bus"
+	depends on USB_ISP1760_HCD && PPC_OF
+	---help---
+	  Enables support for the device present on the PowerPC
+	  OpenFirmware platform bus.
+
 config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
@@ -261,3 +318,9 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
+config SUPERH_ON_CHIP_R8A66597
+	boolean "Enable SuperH on-chip USB like the R8A66597"
+	depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+	help
+	   Renesas SuperH processor has USB like the R8A66597.
+	   This driver supported processor is SH7366.