X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-fsl.c;h=01c3da34f678e4a52107f64bca1674bb7e64c807;hb=ae6e59caefd8d4097ccb096c95df95ec7e52fe88;hp=7370d6187c64620260850fefc18e2054838108c3;hpb=7fecc34e07e02b4d9dab1a1f4bf7fdac0a656b9b;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 7370d6187c6..01c3da34f67 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -56,7 +56,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
 	if (!pdata) {
 		dev_err(&pdev->dev,
-			"No platform data for %s.\n", pdev->dev.bus_id);
+			"No platform data for %s.\n", dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 
@@ -69,7 +69,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	      (pdata->operating_mode == FSL_USB2_DR_OTG))) {
 		dev_err(&pdev->dev,
 			"Non Host Mode configured for %s. Wrong driver linked.\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 
@@ -77,12 +77,12 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (!res) {
 		dev_err(&pdev->dev,
 			"Found HC with no IRQ. Check %s setup!\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 	irq = res->start;
 
-	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
 		goto err1;
@@ -92,7 +92,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (!res) {
 		dev_err(&pdev->dev,
 			"Found HC with no register addr. Check %s setup!\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		retval = -ENODEV;
 		goto err2;
 	}
@@ -132,7 +132,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
       err2:
 	usb_put_hcd(hcd);
       err1:
-	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
 	return retval;
 }
 
@@ -230,8 +230,13 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
 
 	/* put controller in host mode. */
 	ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
+#ifdef CONFIG_PPC_85xx
+	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
+	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
+#else
 	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
 	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
+#endif
 	out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 }