X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-pci.c;h=a1bd2bea6debcff9d436495953c2aa1ed01fcbbb;hb=3e8e7c93d7eb091463839b5212789c4aae09459e;hp=3a6687df559419c0cb6206fca819dc79f21c45eb;hpb=34218e06688341bd05a41425b745c7812d118de0;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 3a6687df559..a1bd2bea6de 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -106,11 +106,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_NVIDIA:
+		switch (pdev->device) {
 		/* NVidia reports that certain chips don't handle
 		 * QH, ITD, or SITD addresses above 2GB.  (But TD,
 		 * data buffer, and periodic schedule are normal.)
 		 */
-		switch (pdev->device) {
 		case 0x003c:	/* MCP04 */
 		case 0x005b:	/* CK804 */
 		case 0x00d8:	/* CK8 */
@@ -120,6 +120,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 				ehci_warn(ehci, "can't enable NVidia "
 					"workaround for >2GB RAM\n");
 			break;
+		/* Some NForce2 chips have problems with selective suspend;
+		 * fixed in newer silicon.
+		 */
+		case 0x0068:
+			pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
+			if ((temp & 0xff) < 0xa4)
+				ehci->no_selective_suspend = 1;
+			break;
 		}
 		break;
 	}
@@ -163,6 +171,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			device_init_wakeup(&pdev->dev, 1);
 	}
 
+#ifdef	CONFIG_USB_SUSPEND
+	/* REVISIT: the controller works fine for wakeup iff the root hub
+	 * itself is "globally" suspended, but usbcore currently doesn't
+	 * understand such things.
+	 *
+	 * System suspend currently expects to be able to suspend the entire
+	 * device tree, device-at-a-time.  If we failed selective suspend
+	 * reports, system suspend would fail; so the root hub code must claim
+	 * success.  That's lying to usbcore, and it matters for for runtime
+	 * PM scenarios with selective suspend and remote wakeup...
+	 */
+	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
+		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
+#endif
+
 	retval = ehci_pci_reinit(ehci, pdev);
 done:
 	return retval;
@@ -327,7 +350,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
-	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }