X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fserial%2Fkeyspan.h;h=8d6ed0293bfac1f6900d3a5be86781a523f80298;hb=f0006314d37639714da9658cf4ff3f1f9f420764;hp=c6830cbdc6df32740b43901090a826f361a06aae;hpb=b643b0fdbc59cf6bbb086974b29d2571e9e9f646;p=linux-2.6-omap-h63xx.git diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index c6830cbdc6d..8d6ed0293bf 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -99,6 +99,10 @@ static int keyspan_usa90_send_setup (struct usb_serial *serial, struct usb_serial_port *port, int reset_port); +static int keyspan_usa67_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); + /* Struct used for firmware - increased size of data section to allow Keyspan's 'C' firmware struct to be used unmodified */ struct ezusb_hex_record { @@ -229,15 +233,17 @@ struct ezusb_hex_record { #define keyspan_usa28_product_id 0x010f #define keyspan_usa28x_product_id 0x0110 #define keyspan_usa28xa_product_id 0x0115 +#define keyspan_usa28xb_product_id 0x0110 +#define keyspan_usa28xg_product_id 0x0135 #define keyspan_usa49w_product_id 0x010a #define keyspan_usa49wlc_product_id 0x012a - +#define keyspan_usa49wg_product_id 0x0131 struct keyspan_device_details { /* product ID value */ int product_id; - enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format; + enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; /* Number of physical ports */ int num_ports; @@ -264,6 +270,9 @@ struct keyspan_device_details { /* Endpoint used for input status */ int instat_endpoint; + /* Endpoint used for input data 49WG only */ + int indat_endpoint; + /* Endpoint used for global control functions */ int glocont_endpoint; @@ -287,6 +296,7 @@ static const struct keyspan_device_details usa18x_device_details = { .inack_endpoints = {0x85}, .outcont_endpoints = {0x05}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA18X_BAUDCLK, @@ -303,6 +313,7 @@ static const struct keyspan_device_details usa19_device_details = { .inack_endpoints = {0x83}, .outcont_endpoints = {0x03}, .instat_endpoint = 0x84, + .indat_endpoint = -1, .glocont_endpoint = -1, .calculate_baud_rate = keyspan_usa19_calc_baud, .baudclk = KEYSPAN_USA19_BAUDCLK, @@ -319,6 +330,7 @@ static const struct keyspan_device_details usa19qi_device_details = { .inack_endpoints = {0x83}, .outcont_endpoints = {0x03}, .instat_endpoint = 0x84, + .indat_endpoint = -1, .glocont_endpoint = -1, .calculate_baud_rate = keyspan_usa28_calc_baud, .baudclk = KEYSPAN_USA19_BAUDCLK, @@ -335,6 +347,7 @@ static const struct keyspan_device_details mpr_device_details = { .inack_endpoints = {0x83}, .outcont_endpoints = {0x03}, .instat_endpoint = 0x84, + .indat_endpoint = -1, .glocont_endpoint = -1, .calculate_baud_rate = keyspan_usa28_calc_baud, .baudclk = KEYSPAN_USA19_BAUDCLK, @@ -351,6 +364,7 @@ static const struct keyspan_device_details usa19qw_device_details = { .inack_endpoints = {0x85}, .outcont_endpoints = {0x05}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA19W_BAUDCLK, @@ -367,6 +381,7 @@ static const struct keyspan_device_details usa19w_device_details = { .inack_endpoints = {0x85}, .outcont_endpoints = {0x05}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA19W_BAUDCLK, @@ -383,6 +398,7 @@ static const struct keyspan_device_details usa19hs_device_details = { .inack_endpoints = {-1}, .outcont_endpoints = {0x02}, .instat_endpoint = 0x82, + .indat_endpoint = -1, .glocont_endpoint = -1, .calculate_baud_rate = keyspan_usa19hs_calc_baud, .baudclk = KEYSPAN_USA19HS_BAUDCLK, @@ -399,6 +415,7 @@ static const struct keyspan_device_details usa28_device_details = { .inack_endpoints = {0x85, 0x86}, .outcont_endpoints = {0x05, 0x06}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa28_calc_baud, .baudclk = KEYSPAN_USA28_BAUDCLK, @@ -415,6 +432,7 @@ static const struct keyspan_device_details usa28x_device_details = { .inack_endpoints = {0x85, 0x86}, .outcont_endpoints = {0x05, 0x06}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA28X_BAUDCLK, @@ -431,11 +449,28 @@ static const struct keyspan_device_details usa28xa_device_details = { .inack_endpoints = {0x85, 0x86}, .outcont_endpoints = {0x05, 0x06}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA28X_BAUDCLK, }; +static const struct keyspan_device_details usa28xg_device_details = { + .product_id = keyspan_usa28xg_product_id, + .msg_format = msg_usa67, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x84, 0x88}, + .outdat_endpoints = {0x02, 0x06}, + .inack_endpoints = {-1, -1}, + .outcont_endpoints = {-1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = -1, + .glocont_endpoint = 0x01, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; /* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ static const struct keyspan_device_details usa49w_device_details = { @@ -449,6 +484,7 @@ static const struct keyspan_device_details usa49w_device_details = { .inack_endpoints = {-1, -1, -1, -1}, .outcont_endpoints = {-1, -1, -1, -1}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA49W_BAUDCLK, @@ -465,11 +501,29 @@ static const struct keyspan_device_details usa49wlc_device_details = { .inack_endpoints = {-1, -1, -1, -1}, .outcont_endpoints = {-1, -1, -1, -1}, .instat_endpoint = 0x87, + .indat_endpoint = -1, .glocont_endpoint = 0x07, .calculate_baud_rate = keyspan_usa19w_calc_baud, .baudclk = KEYSPAN_USA19W_BAUDCLK, }; +static const struct keyspan_device_details usa49wg_device_details = { + .product_id = keyspan_usa49wg_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ + .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = 0x88, + .glocont_endpoint = 0x00, /* uses control EP */ + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + static const struct keyspan_device_details *keyspan_devices[] = { &usa18x_device_details, &usa19_device_details, @@ -481,9 +535,11 @@ static const struct keyspan_device_details *keyspan_devices[] = { &usa28_device_details, &usa28x_device_details, &usa28xa_device_details, + &usa28xg_device_details, /* 28xb not required as it renumerates as a 28x */ &usa49w_device_details, &usa49wlc_device_details, + &usa49wg_device_details, NULL, }; @@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, { } /* Terminating entry */ }; @@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { } /* Terminating entry */ }; static struct usb_device_id keyspan_4port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, { } /* Terminating entry */ }; @@ -573,11 +635,7 @@ static struct usb_serial_driver keyspan_pre_device = { .name = "keyspan_no_firm", }, .description = "Keyspan - (without firmware)", - .usb_driver = &keyspan_driver, .id_table = keyspan_pre_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .attach = keyspan_fake_startup, }; @@ -588,11 +646,7 @@ static struct usb_serial_driver keyspan_1port_device = { .name = "keyspan_1", }, .description = "Keyspan 1 port adapter", - .usb_driver = &keyspan_driver, .id_table = keyspan_1port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .open = keyspan_open, .close = keyspan_close, @@ -616,11 +670,7 @@ static struct usb_serial_driver keyspan_2port_device = { .name = "keyspan_2", }, .description = "Keyspan 2 port adapter", - .usb_driver = &keyspan_driver, .id_table = keyspan_2port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 2, .open = keyspan_open, .close = keyspan_close, @@ -644,11 +694,7 @@ static struct usb_serial_driver keyspan_4port_device = { .name = "keyspan_4", }, .description = "Keyspan 4 port adapter", - .usb_driver = &keyspan_driver, .id_table = keyspan_4port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = 5, - .num_bulk_out = 5, .num_ports = 4, .open = keyspan_open, .close = keyspan_close,