X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fstorage%2FKconfig;h=422a4b288e346f589687aada8950d294dfbf469a;hb=82965addad66fce61a92c5f03104ea90b0b87124;hp=c41d64dbb0f0ec39d50901ffe771715b31a62a48;hpb=1f8fc99300c6247cace008c470f31eb86e9e7802;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c41d64dbb0f..422a4b288e3 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -8,8 +8,7 @@ comment "may also be needed; see USB_STORAGE Help for more information"
 
 config USB_STORAGE
 	tristate "USB Mass Storage support"
-	depends on USB
-	select SCSI
+	depends on USB && SCSI
 	---help---
 	  Say Y here if you want to connect USB mass storage devices to your
 	  computer's USB port. This is the driver you need for USB
@@ -18,7 +17,7 @@ config USB_STORAGE
 	  similar devices. This driver may also be used for some cameras
 	  and card readers.
 
-	  This option 'selects' (turns on, enables) 'SCSI', but you
+	  This option depends on 'SCSI' support being enabled, but you
 	  probably also need 'SCSI device support: SCSI disk support'
 	  (BLK_DEV_SD) for most USB storage devices.
 
@@ -48,7 +47,8 @@ config USB_STORAGE_FREECOM
 
 config USB_STORAGE_ISD200
 	bool "ISD-200 USB/ATA Bridge support"
-	depends on USB_STORAGE && BLK_DEV_IDE
+	depends on USB_STORAGE
+	depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
 	  on the In-Systems Design ISD-200 USB/ATA bridge.
@@ -112,6 +112,15 @@ config USB_STORAGE_JUMPSHOT
 	  Say Y here to include additional code to support the Lexar Jumpshot
 	  USB CompactFlash reader.
 
+config USB_STORAGE_ALAUDA
+	bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)"
+	depends on USB_STORAGE && EXPERIMENTAL
+	help
+	  Say Y here to include additional code to support the Olympus MAUSB-10
+	  and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+	  These devices are based on the Alauda chip and support support both
+	  XD and SmartMedia cards.
 
 config USB_STORAGE_ONETOUCH
 	bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
@@ -124,3 +133,29 @@ config USB_STORAGE_ONETOUCH
 	  hard drive's as an input device. An action can be associated with
 	  this input in any keybinding software. (e.g. gnome's keyboard short-
 	  cuts)
+
+config USB_STORAGE_KARMA
+	bool "Support for Rio Karma music player"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support the Rio Karma
+	  USB interface.
+
+	  This code places the Rio Karma into mass storage mode, enabling
+	  it to be mounted as an ordinary filesystem. Performing an eject
+	  on the resulting scsi device node returns the Karma to normal
+	  operation.
+
+config USB_LIBUSUAL
+	bool "The shared table of common (or usual) storage devices"
+	depends on USB
+	help
+	  This module contains a table of common (or usual) devices
+	  for usb-storage and ub drivers, and allows to switch binding
+	  of these devices without rebuilding modules.
+
+	  Typical syntax of /etc/modprobe.conf is:
+
+		options libusual bias="ub"
+
+	  If unsure, say N.