X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fvideo%2Fau1100fb.c;h=62bd4441b5e06c81fc9c4366916ecb3a2747f09e;hb=953a64798d82ee5467da2bdc0e467ef874fbc208;hp=80a81eccad363aeaf25d21fb805f4972c8bb5fdd;hpb=e0cc09e295f346b7921e921f385fe5213472316a;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81eccad3..62bd4441b5e 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@ static int nocursor = 0;
 module_param(nocursor, int, 0644);
 MODULE_PARM_DESC(nocursor, "cursor enable/disable");
 
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+	print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+	switch (blank_mode) {
+
+	case VESA_NO_BLANKING:
+			/* Turn on panel */
+			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+
+	case VESA_VSYNC_SUSPEND:
+	case VESA_HSYNC_SUSPEND:
+	case VESA_POWERDOWN:
+			/* Turn off panel */
+			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+	default:
+		break;
+
+	}
+	return 0;
+}
+
 /*
  * Set hardware with var settings. This will enable the controller with a specific
  * mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned
 	return 0;
 }
 
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
-	print_dbg("fb_blank %d %p", blank_mode, fbi);
-
-	switch (blank_mode) {
-
-	case VESA_NO_BLANKING:
-			/* Turn on panel */
-			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-
-	case VESA_VSYNC_SUSPEND:
-	case VESA_HSYNC_SUSPEND:
-	case VESA_POWERDOWN:
-			/* Turn off panel */
-			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-	default:
-		break;
-
-	}
-	return 0;
-}
-
 /* fb_pan_display
  * Pan display in x and/or y as specified
  */
@@ -457,7 +457,7 @@ static struct fb_ops au1100fb_ops =
 
 /* AU1100 LCD controller device driver */
 
-int au1100fb_drv_probe(struct device *dev)
+static int __init au1100fb_drv_probe(struct device *dev)
 {
 	struct au1100fb_device *fbdev = NULL;
 	struct resource *regs_res;