X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fvideo%2Fs3c2410fb.c;h=f0598961c6b04be94d20fdae77e5281f7096f6cf;hb=ab9d6e3374d938cf3d941fbed5ba32a19ad263b8;hp=71fa6edb5c477d64cd255b9fd866ec9dbe070d28;hpb=f0e2dcffae8701f00b34bce90e762eb798dea5b1;p=linux-2.6-omap-h63xx.git diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 71fa6edb5c4..f0598961c6b 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -1,75 +1,15 @@ -/* - * linux/drivers/video/s3c2410fb.c - * Copyright (c) Arnaud Patard, Ben Dooks +/* linux/drivers/video/s3c2410fb.c + * Copyright (c) 2004,2005 Arnaud Patard + * Copyright (c) 2004-2008 Ben Dooks + * + * S3C2410 LCD Framebuffer Driver * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * - * S3C2410 LCD Controller Frame Buffer Driver - * based on skeletonfb.c, sa1100fb.c and others - * - * ChangeLog - * 2005-04-07: Arnaud Patard - * - u32 state -> pm_message_t state - * - S3C2410_{VA,SZ}_LCD -> S3C24XX - * - * 2005-03-15: Arnaud Patard - * - Removed the ioctl - * - use readl/writel instead of __raw_writel/__raw_readl - * - * 2004-12-04: Arnaud Patard - * - Added the possibility to set on or off the - * debugging messages - * - Replaced 0 and 1 by on or off when reading the - * /sys files - * - * 2005-03-23: Ben Dooks - * - added non 16bpp modes - * - updated platform information for range of x/y/bpp - * - add code to ensure palette is written correctly - * - add pixel clock divisor control - * - * 2004-11-11: Arnaud Patard - * - Removed the use of currcon as it no more exists - * - Added LCD power sysfs interface - * - * 2004-11-03: Ben Dooks - * - minor cleanups - * - add suspend/resume support - * - s3c2410fb_setcolreg() not valid in >8bpp modes - * - removed last CONFIG_FB_S3C2410_FIXED - * - ensure lcd controller stopped before cleanup - * - added sysfs interface for backlight power - * - added mask for gpio configuration - * - ensured IRQs disabled during GPIO configuration - * - disable TPAL before enabling video - * - * 2004-09-20: Arnaud Patard - * - Suppress command line options - * - * 2004-09-15: Arnaud Patard - * - code cleanup - * - * 2004-09-07: Arnaud Patard - * - Renamed from h1940fb.c to s3c2410fb.c - * - Add support for different devices - * - Backlight support - * - * 2004-09-05: Herbert Pötzl - * - added clock (de-)allocation code - * - added fixem fbmem option - * - * 2004-07-27: Arnaud Patard - * - code cleanup - * - added a forgotten return in h1940fb_init - * - * 2004-07-19: Herbert Pötzl - * - code cleanup and extended debugging - * - * 2004-07-15: Arnaud Patard - * - First version - */ + * Driver based on skeletonfb.c, sa1100fb.c and others. +*/ #include #include @@ -430,9 +370,9 @@ static void s3c2410fb_activate_var(struct fb_info *info) struct fb_var_screeninfo *var = &info->var; int clkdiv = s3c2410fb_calc_pixclk(fbi, var->pixclock) / 2; - dprintk("%s: var->xres = %d\n", __FUNCTION__, var->xres); - dprintk("%s: var->yres = %d\n", __FUNCTION__, var->yres); - dprintk("%s: var->bpp = %d\n", __FUNCTION__, var->bits_per_pixel); + dprintk("%s: var->xres = %d\n", __func__, var->xres); + dprintk("%s: var->yres = %d\n", __func__, var->yres); + dprintk("%s: var->bpp = %d\n", __func__, var->bits_per_pixel); if (type == S3C2410_LCDCON1_TFT) { s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs); @@ -580,6 +520,27 @@ static int s3c2410fb_setcolreg(unsigned regno, return 0; } +/* s3c2410fb_lcd_enable + * + * shutdown the lcd controller + */ +static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable) +{ + unsigned long flags; + + local_irq_save(flags); + + if (enable) + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID; + else + fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; + + writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); + + local_irq_restore(flags); +} + + /* * s3c2410fb_blank * @blank_mode: the blank mode we want. @@ -589,9 +550,6 @@ static int s3c2410fb_setcolreg(unsigned regno, * blanking succeeded, != 0 if un-/blanking failed due to e.g. a * video mode which doesn't support it. Implements VESA suspend * and powerdown modes on hardware that supports disabling hsync/vsync: - * blank_mode == 2: suspend vsync - * blank_mode == 3: suspend hsync - * blank_mode == 4: powerdown * * Returns negative errno on error, or zero on success. * @@ -605,6 +563,12 @@ static int s3c2410fb_blank(int blank_mode, struct fb_info *info) tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL; + if (blank_mode == FB_BLANK_POWERDOWN) { + s3c2410fb_lcd_enable(fbi, 0); + } else { + s3c2410fb_lcd_enable(fbi, 1); + } + if (blank_mode == FB_BLANK_UNBLANK) writel(0x0, tpal_reg); else { @@ -948,7 +912,10 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, } /* create device files */ - device_create_file(&pdev->dev, &dev_attr_debug); + ret = device_create_file(&pdev->dev, &dev_attr_debug); + if (ret) { + printk(KERN_ERR "failed to add debug attribute\n"); + } printk(KERN_INFO "fb%d: %s frame buffer device\n", fbinfo->node, fbinfo->fix.id); @@ -983,21 +950,6 @@ static int __init s3c2412fb_probe(struct platform_device *pdev) return s3c24xxfb_probe(pdev, DRV_S3C2412); } -/* s3c2410fb_stop_lcd - * - * shutdown the lcd controller - */ -static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi) -{ - unsigned long flags; - - local_irq_save(flags); - - fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; - writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); - - local_irq_restore(flags); -} /* * Cleanup @@ -1010,7 +962,7 @@ static int s3c2410fb_remove(struct platform_device *pdev) unregister_framebuffer(fbinfo); - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); msleep(1); s3c2410fb_unmap_video_memory(fbinfo); @@ -1043,7 +995,7 @@ static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state) struct fb_info *fbinfo = platform_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); /* sleep before disabling the clock, we need to ensure * the LCD DMA engine is not going to get back on the bus @@ -1118,3 +1070,5 @@ MODULE_AUTHOR("Arnaud Patard , " "Ben Dooks "); MODULE_DESCRIPTION("Framebuffer driver for the s3c2410"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-lcd"); +MODULE_ALIAS("platform:s3c2412-lcd");