X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fhdreg.h;h=c37e9241fae785ce24930473b59f3029c6e99ff0;hb=0d876c6a96e2cabf8632e8066b617d9c2dec9518;hp=818c6afc109190affc2d592ea66fb120efdd139f;hpb=7e23772f414cdbfb2a08aed237d6e926bb1cb728;p=linux-2.6-omap-h63xx.git diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 818c6afc109..c37e9241fae 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -44,7 +44,9 @@ /* Bits for HD_ERROR */ #define MARK_ERR 0x01 /* Bad address mark */ +#define ILI_ERR 0x01 /* Illegal Length Indication (ATAPI) */ #define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define EOM_ERR 0x02 /* End Of Media (ATAPI) */ #define ABRT_ERR 0x04 /* Command aborted */ #define MCR_ERR 0x08 /* media change request */ #define ID_ERR 0x10 /* ID field not found */ @@ -52,6 +54,7 @@ #define ECC_ERR 0x40 /* Uncorrectable ECC error */ #define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ #define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ +#define LFS_ERR 0xf0 /* Last Failed Sense (ATAPI) */ /* Bits of HD_NSECTOR */ #define CD 0x01 @@ -70,13 +73,13 @@ #define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8)) #define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8)) -#define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_NO_DATA 0 +#ifndef __KERNEL__ +#define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_SET_XFER 1 - #define IDE_DRIVE_TASK_IN 2 - #define IDE_DRIVE_TASK_OUT 3 +#endif #define IDE_DRIVE_TASK_RAW_WRITE 4 /* @@ -87,10 +90,10 @@ #ifndef __KERNEL__ #define IDE_TASKFILE_STD_OUT_FLAGS 0xFE #define IDE_HOB_STD_OUT_FLAGS 0x3C -#endif typedef unsigned char task_ioreg_t; typedef unsigned long sata_ioreg_t; +#endif typedef union ide_reg_valid_s { unsigned all : 16; @@ -116,8 +119,8 @@ typedef union ide_reg_valid_s { } ide_reg_valid_t; typedef struct ide_task_request_s { - task_ioreg_t io_ports[8]; - task_ioreg_t hob_ports[8]; + __u8 io_ports[8]; + __u8 hob_ports[8]; /* bytes 6 and 7 are unused */ ide_reg_valid_t out_flags; ide_reg_valid_t in_flags; int data_phase; @@ -133,36 +136,35 @@ typedef struct ide_ioctl_request_s { } ide_ioctl_request_t; struct hd_drive_cmd_hdr { - task_ioreg_t command; - task_ioreg_t sector_number; - task_ioreg_t feature; - task_ioreg_t sector_count; + __u8 command; + __u8 sector_number; + __u8 feature; + __u8 sector_count; }; +#ifndef __KERNEL__ typedef struct hd_drive_task_hdr { - task_ioreg_t data; - task_ioreg_t feature; - task_ioreg_t sector_count; - task_ioreg_t sector_number; - task_ioreg_t low_cylinder; - task_ioreg_t high_cylinder; - task_ioreg_t device_head; - task_ioreg_t command; + __u8 data; + __u8 feature; + __u8 sector_count; + __u8 sector_number; + __u8 low_cylinder; + __u8 high_cylinder; + __u8 device_head; + __u8 command; } task_struct_t; typedef struct hd_drive_hob_hdr { - task_ioreg_t data; - task_ioreg_t feature; - task_ioreg_t sector_count; - task_ioreg_t sector_number; - task_ioreg_t low_cylinder; - task_ioreg_t high_cylinder; - task_ioreg_t device_head; - task_ioreg_t control; + __u8 data; + __u8 feature; + __u8 sector_count; + __u8 sector_number; + __u8 low_cylinder; + __u8 high_cylinder; + __u8 device_head; + __u8 control; } hob_struct_t; - -#define TASKFILE_INVALID 0x7fff -#define TASKFILE_48 0x8000 +#endif #define TASKFILE_NO_DATA 0x0000 @@ -178,12 +180,16 @@ typedef struct hd_drive_hob_hdr { #define TASKFILE_IN_DMAQ 0x0080 #define TASKFILE_OUT_DMAQ 0x0100 +#ifndef __KERNEL__ #define TASKFILE_P_IN 0x0200 #define TASKFILE_P_OUT 0x0400 #define TASKFILE_P_IN_DMA 0x0800 #define TASKFILE_P_OUT_DMA 0x1000 #define TASKFILE_P_IN_DMAQ 0x2000 #define TASKFILE_P_OUT_DMAQ 0x4000 +#define TASKFILE_48 0x8000 +#define TASKFILE_INVALID 0x7fff +#endif /* ATA/ATAPI Commands pre T13 Spec */ #define WIN_NOP 0x00 @@ -358,7 +364,7 @@ typedef struct hd_drive_hob_hdr { #define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */ #define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */ #define SETFEATURES_EN_REST 0xAC /* ATA-1 */ -#define SETFEATURES_4B_RW_LONG 0xBB /* Set Lenght of 4 bytes */ +#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */ #define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */ #define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */ #define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */ @@ -416,9 +422,11 @@ struct hd_geometry { #define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ #define HDIO_SET_DMA 0x0326 /* change use-dma flag */ #define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ +#ifndef __KERNEL__ #define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */ -#define HDIO_SET_NICE 0x0329 /* set nice flags */ #define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */ +#endif +#define HDIO_SET_NICE 0x0329 /* set nice flags */ #define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */ #define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */ #define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */ @@ -700,8 +708,10 @@ struct hd_driveid { */ #define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */ #define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */ -#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_1 (3) /* when probably won't affect us much */ +#ifndef __KERNEL__ +#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_2 (4) /* when we know it's on our expense */ +#endif #endif /* _LINUX_HDREG_H */