X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fhdreg.h;h=c37e9241fae785ce24930473b59f3029c6e99ff0;hb=5f6a6a9c4e4d790aae55cb412a7643329057c5e0;hp=0521f1234f158bde5039360791d3a69f68a44fc1;hpb=0e38a66a1e69821ab57a06d5a7b11f0df9275bf4;p=linux-2.6-omap-h63xx.git

diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index 0521f1234f1..c37e9241fae 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -73,13 +73,13 @@
 #define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
 #define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))
 
-#define IDE_DRIVE_TASK_INVALID		-1
 #define IDE_DRIVE_TASK_NO_DATA		0
+#ifndef __KERNEL__
+#define IDE_DRIVE_TASK_INVALID		-1
 #define IDE_DRIVE_TASK_SET_XFER		1
-
 #define IDE_DRIVE_TASK_IN		2
-
 #define IDE_DRIVE_TASK_OUT		3
+#endif
 #define IDE_DRIVE_TASK_RAW_WRITE	4
 
 /*
@@ -166,9 +166,6 @@ typedef struct hd_drive_hob_hdr {
 } hob_struct_t;
 #endif
 
-#define TASKFILE_INVALID		0x7fff
-#define TASKFILE_48			0x8000
-
 #define TASKFILE_NO_DATA		0x0000
 
 #define TASKFILE_IN			0x0001
@@ -183,12 +180,16 @@ typedef struct hd_drive_hob_hdr {
 #define TASKFILE_IN_DMAQ		0x0080
 #define TASKFILE_OUT_DMAQ		0x0100
 
+#ifndef __KERNEL__
 #define TASKFILE_P_IN			0x0200
 #define TASKFILE_P_OUT			0x0400
 #define TASKFILE_P_IN_DMA		0x0800
 #define TASKFILE_P_OUT_DMA		0x1000
 #define TASKFILE_P_IN_DMAQ		0x2000
 #define TASKFILE_P_OUT_DMAQ		0x4000
+#define TASKFILE_48			0x8000
+#define TASKFILE_INVALID		0x7fff
+#endif
 
 /* ATA/ATAPI Commands pre T13 Spec */
 #define WIN_NOP				0x00
@@ -363,7 +364,7 @@ typedef struct hd_drive_hob_hdr {
 #define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
 #define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
 #define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
-#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Lenght of 4 bytes */
+#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
 #define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
 #define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
 #define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
@@ -421,9 +422,11 @@ struct hd_geometry {
 #define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
 #define HDIO_SET_DMA		0x0326	/* change use-dma flag */
 #define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
+#ifndef __KERNEL__
 #define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
-#define HDIO_SET_NICE		0x0329	/* set nice flags */
 #define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
+#endif
+#define HDIO_SET_NICE		0x0329	/* set nice flags */
 #define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
 #define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
 #define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
@@ -705,8 +708,10 @@ struct hd_driveid {
  */
 #define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
 #define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
-#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
 #define IDE_NICE_1		(3)	/* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
 #define IDE_NICE_2		(4)	/* when we know it's on our expense */
+#endif
 
 #endif	/* _LINUX_HDREG_H */