X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fide.h;h=86fa030e802223e037044468c6d9610d2a4e1bf9;hb=a36223b0dc14606b5c80aacbbe6288133693a841;hp=a9d82d6e6bdd68e05e0e6eb016a619d6526f6ece;hpb=4c7145a1ec1bb789d5f07e47510e8bda546a7c4a;p=linux-2.6-omap-h63xx.git diff --git a/include/linux/ide.h b/include/linux/ide.h index a9d82d6e6bd..86fa030e802 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -48,12 +48,6 @@ typedef unsigned char byte; /* used everywhere */ #define ERROR_RESET 3 /* Reset controller every 4th retry */ #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */ -/* - * state flags - */ - -#define DMA_PIO_RETRY 1 /* retrying in PIO */ - #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif)) #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup)) @@ -268,8 +262,6 @@ static inline int __ide_default_irq(unsigned long base) * set_geometry : respecify drive geometry * recalibrate : seek to cyl 0 * set_multmode : set multmode count - * set_tune : tune interface for drive - * serviced : service command * reserved : unused */ typedef union { @@ -278,42 +270,10 @@ typedef union { unsigned set_geometry : 1; unsigned recalibrate : 1; unsigned set_multmode : 1; - unsigned set_tune : 1; - unsigned serviced : 1; - unsigned reserved : 3; + unsigned reserved : 5; } b; } special_t; -/* - * ATA-IDE Select Register, aka Device-Head - * - * head : always zeros here - * unit : drive select number: 0/1 - * bit5 : always 1 - * lba : using LBA instead of CHS - * bit7 : always 1 - */ -typedef union { - unsigned all : 8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned head : 4; - unsigned unit : 1; - unsigned bit5 : 1; - unsigned lba : 1; - unsigned bit7 : 1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned bit7 : 1; - unsigned lba : 1; - unsigned bit5 : 1; - unsigned unit : 1; - unsigned head : 4; -#else -#error "Please fix " -#endif - } b; -} select_t, ata_select_t; - /* * Status returned from various ide_ functions */ @@ -322,6 +282,175 @@ typedef enum { ide_started, /* a drive operation was started, handler was set */ } ide_startstop_t; +enum { + IDE_TFLAG_LBA48 = (1 << 0), + IDE_TFLAG_FLAGGED = (1 << 2), + IDE_TFLAG_OUT_DATA = (1 << 3), + IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4), + IDE_TFLAG_OUT_HOB_NSECT = (1 << 5), + IDE_TFLAG_OUT_HOB_LBAL = (1 << 6), + IDE_TFLAG_OUT_HOB_LBAM = (1 << 7), + IDE_TFLAG_OUT_HOB_LBAH = (1 << 8), + IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | + IDE_TFLAG_OUT_HOB_NSECT | + IDE_TFLAG_OUT_HOB_LBAL | + IDE_TFLAG_OUT_HOB_LBAM | + IDE_TFLAG_OUT_HOB_LBAH, + IDE_TFLAG_OUT_FEATURE = (1 << 9), + IDE_TFLAG_OUT_NSECT = (1 << 10), + IDE_TFLAG_OUT_LBAL = (1 << 11), + IDE_TFLAG_OUT_LBAM = (1 << 12), + IDE_TFLAG_OUT_LBAH = (1 << 13), + IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT | + IDE_TFLAG_OUT_LBAL | + IDE_TFLAG_OUT_LBAM | + IDE_TFLAG_OUT_LBAH, + IDE_TFLAG_OUT_DEVICE = (1 << 14), + IDE_TFLAG_WRITE = (1 << 15), + IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16), + IDE_TFLAG_IN_DATA = (1 << 17), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 18), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19), + IDE_TFLAG_IN_HOB_FEATURE = (1 << 20), + IDE_TFLAG_IN_HOB_NSECT = (1 << 21), + IDE_TFLAG_IN_HOB_LBAL = (1 << 22), + IDE_TFLAG_IN_HOB_LBAM = (1 << 23), + IDE_TFLAG_IN_HOB_LBAH = (1 << 24), + IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | + IDE_TFLAG_IN_HOB_LBAM | + IDE_TFLAG_IN_HOB_LBAH, + IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE | + IDE_TFLAG_IN_HOB_NSECT | + IDE_TFLAG_IN_HOB_LBA, + IDE_TFLAG_IN_FEATURE = (1 << 1), + IDE_TFLAG_IN_NSECT = (1 << 25), + IDE_TFLAG_IN_LBAL = (1 << 26), + IDE_TFLAG_IN_LBAM = (1 << 27), + IDE_TFLAG_IN_LBAH = (1 << 28), + IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | + IDE_TFLAG_IN_LBAM | + IDE_TFLAG_IN_LBAH, + IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | + IDE_TFLAG_IN_LBA, + IDE_TFLAG_IN_DEVICE = (1 << 29), + IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | + IDE_TFLAG_IN_HOB, + IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | + IDE_TFLAG_IN_TF, + IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | + IDE_TFLAG_IN_DEVICE, + /* force 16-bit I/O operations */ + IDE_TFLAG_IO_16BIT = (1 << 30), + /* ide_task_t was allocated using kmalloc() */ + IDE_TFLAG_DYN = (1 << 31), +}; + +struct ide_taskfile { + u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ + + u8 hob_feature; /* 1-5: additional data to support LBA48 */ + u8 hob_nsect; + u8 hob_lbal; + u8 hob_lbam; + u8 hob_lbah; + + u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ + + union { /*  7: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ + }; + + u8 nsect; /* 8: number of sectors */ + u8 lbal; /* 9: LBA low */ + u8 lbam; /* 10: LBA mid */ + u8 lbah; /* 11: LBA high */ + + u8 device; /* 12: device select */ + + union { /* 13: */ + u8 status; /*  read: status  */ + u8 command; /* write: command */ + }; +}; + +typedef struct ide_task_s { + union { + struct ide_taskfile tf; + u8 tf_array[14]; + }; + u32 tf_flags; + int data_phase; + struct request *rq; /* copy of request */ + void *special; /* valid_t generally */ +} ide_task_t; + +/* ATAPI packet command flags */ +enum { + /* set when an error is considered normal - no retry (ide-tape) */ + PC_FLAG_ABORT = (1 << 0), + PC_FLAG_SUPPRESS_ERROR = (1 << 1), + PC_FLAG_WAIT_FOR_DSC = (1 << 2), + PC_FLAG_DMA_OK = (1 << 3), + PC_FLAG_DMA_IN_PROGRESS = (1 << 4), + PC_FLAG_DMA_ERROR = (1 << 5), + PC_FLAG_WRITING = (1 << 6), + /* command timed out */ + PC_FLAG_TIMEDOUT = (1 << 7), +}; + +/* + * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes. + * This is used for several packet commands (not for READ/WRITE commands). + */ +#define IDE_PC_BUFFER_SIZE 256 + +struct ide_atapi_pc { + /* actual packet bytes */ + u8 c[12]; + /* incremented on each retry */ + int retries; + int error; + + /* bytes to transfer */ + int req_xfer; + /* bytes actually transferred */ + int xferred; + + /* data buffer */ + u8 *buf; + /* current buffer position */ + u8 *cur_pos; + int buf_size; + /* missing/available data on the current buffer */ + int b_count; + + /* the corresponding request */ + struct request *rq; + + unsigned long flags; + + /* + * those are more or less driver-specific and some of them are subject + * to change/removal later. + */ + u8 pc_buf[IDE_PC_BUFFER_SIZE]; + + /* idetape only */ + struct idetape_bh *bh; + char *b_data; + + /* idescsi only for now */ + struct scatterlist *sg; + unsigned int sg_cnt; + + struct scsi_cmnd *scsi_cmd; + void (*done) (struct scsi_cmnd *); + + unsigned long timeout; +}; + struct ide_devset; struct ide_driver_s; @@ -394,6 +523,58 @@ enum { IDE_AFLAG_NO_AUTOCLOSE = (1 << 29), }; +/* device flags */ +enum { + /* restore settings after device reset */ + IDE_DFLAG_KEEP_SETTINGS = (1 << 0), + /* device is using DMA for read/write */ + IDE_DFLAG_USING_DMA = (1 << 1), + /* okay to unmask other IRQs */ + IDE_DFLAG_UNMASK = (1 << 2), + /* don't attempt flushes */ + IDE_DFLAG_NOFLUSH = (1 << 3), + /* DSC overlap */ + IDE_DFLAG_DSC_OVERLAP = (1 << 4), + /* give potential excess bandwidth */ + IDE_DFLAG_NICE1 = (1 << 5), + /* device is physically present */ + IDE_DFLAG_PRESENT = (1 << 6), + /* device ejected hint */ + IDE_DFLAG_DEAD = (1 << 7), + /* id read from device (synthetic if not set) */ + IDE_DFLAG_ID_READ = (1 << 8), + IDE_DFLAG_NOPROBE = (1 << 9), + /* need to do check_media_change() */ + IDE_DFLAG_REMOVABLE = (1 << 10), + /* needed for removable devices */ + IDE_DFLAG_ATTACH = (1 << 11), + IDE_DFLAG_FORCED_GEOM = (1 << 12), + /* disallow setting unmask bit */ + IDE_DFLAG_NO_UNMASK = (1 << 13), + /* disallow enabling 32-bit I/O */ + IDE_DFLAG_NO_IO_32BIT = (1 << 14), + /* for removable only: door lock/unlock works */ + IDE_DFLAG_DOORLOCKING = (1 << 15), + /* disallow DMA */ + IDE_DFLAG_NODMA = (1 << 16), + /* powermanagment told us not to do anything, so sleep nicely */ + IDE_DFLAG_BLOCKED = (1 << 17), + /* ide-scsi emulation */ + IDE_DFLAG_SCSI = (1 << 18), + /* sleeping & sleep field valid */ + IDE_DFLAG_SLEEPING = (1 << 19), + IDE_DFLAG_POST_RESET = (1 << 20), + IDE_DFLAG_UDMA33_WARNED = (1 << 21), + IDE_DFLAG_LBA48 = (1 << 22), + /* status of write cache */ + IDE_DFLAG_WCACHE = (1 << 23), + /* used for ignoring ATA_DF */ + IDE_DFLAG_NOWERR = (1 << 24), + /* retrying in PIO */ + IDE_DFLAG_DMA_PIO_RETRY = (1 << 25), + IDE_DFLAG_LBA = (1 << 26), +}; + struct ide_drive_s { char name[4]; /* drive name, such as "hda" */ char driver_req[10]; /* requests specific driver */ @@ -410,44 +591,19 @@ struct ide_drive_s { #endif struct hwif_s *hwif; /* actually (ide_hwif_t *) */ + unsigned long dev_flags; + unsigned long sleep; /* sleep until this time */ unsigned long service_start; /* time we started last request */ unsigned long service_time; /* service time of last request */ unsigned long timeout; /* max time to wait for irq */ special_t special; /* special action flags */ - select_t select; /* basic drive/head select reg value */ + u8 select; /* basic drive/head select reg value */ u8 retry_pio; /* retrying dma capable host in pio */ - u8 state; /* retry state */ u8 waiting_for_dma; /* dma currently in progress */ - unsigned keep_settings : 1; /* restore settings after drive reset */ - unsigned using_dma : 1; /* disk is using dma for read/write */ - unsigned unmask : 1; /* okay to unmask other irqs */ - unsigned noflush : 1; /* don't attempt flushes */ - unsigned dsc_overlap : 1; /* DSC overlap */ - unsigned nice1 : 1; /* give potential excess bandwidth */ - unsigned present : 1; /* drive is physically present */ - unsigned dead : 1; /* device ejected hint */ - unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */ - unsigned noprobe : 1; /* from: hdx=noprobe */ - unsigned removable : 1; /* 1 if need to do check_media_change */ - unsigned attach : 1; /* needed for removable devices */ - unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */ - unsigned no_unmask : 1; /* disallow setting unmask bit */ - unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ - unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ - unsigned nodma : 1; /* disallow DMA */ - unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */ - unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */ - unsigned sleeping : 1; /* 1=sleeping & sleep field valid */ - unsigned post_reset : 1; - unsigned udma33_warned : 1; - unsigned addressing : 2; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */ - unsigned wcache : 1; /* status of write cache */ - unsigned nowerr : 1; /* used for ignoring ATA_DF */ - u8 quirk_list; /* considered quirky, set for a specific host */ u8 init_speed; /* transfer rate set at boot */ u8 current_speed; /* current transfer rate set */ @@ -458,7 +614,6 @@ struct ide_drive_s { u8 ready_stat; /* min status value for drive ready */ u8 mult_count; /* current multiple sector setting */ u8 mult_req; /* requested multiple sector setting */ - u8 tune_req; /* requested drive tuning setting */ u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ u8 bad_wstat; /* used for ignoring ATA_DF */ u8 head; /* "real" number of heads */ @@ -466,6 +621,9 @@ struct ide_drive_s { u8 bios_head; /* BIOS/fdisk/LILO number of heads */ u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */ + /* delay this long before sending packet command */ + u8 pc_delay; + unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */ unsigned int cyl; /* "real" number of cyls */ unsigned int drive_data; /* used by set_pio_mode/selectproc */ @@ -477,6 +635,9 @@ struct ide_drive_s { int lun; /* logical unit */ int crc_count; /* crc counter to reduce drive speed */ + + unsigned long debug_mask; /* debugging levels switch */ + #ifdef CONFIG_BLK_DEV_IDEACPI struct ide_acpi_drive_link *acpidata; #endif @@ -484,17 +645,32 @@ struct ide_drive_s { struct device gendev; struct completion gendev_rel_comp; /* to deal with device release() */ + /* current packet command */ + struct ide_atapi_pc *pc; + /* callback for packet commands */ - void (*pc_callback)(struct ide_drive_s *); + void (*pc_callback)(struct ide_drive_s *, int); + + void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *); + int (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *, + unsigned int, int); unsigned long atapi_flags; + + struct ide_atapi_pc request_sense_pc; + struct request request_sense_rq; }; typedef struct ide_drive_s ide_drive_t; -#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev) +#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) + +#define to_ide_drv(obj, cont_type) \ + container_of(obj, struct cont_type, kref) + +#define ide_drv_g(disk, cont_type) \ + container_of((disk)->private_data, struct cont_type, driver) -struct ide_task_s; struct ide_port_info; struct ide_tp_ops { @@ -528,6 +704,7 @@ extern const struct ide_tp_ops default_tp_ops; * @resetproc: routine to reset controller after a disk reset * @maskproc: special host masking for drive selection * @quirkproc: check host's drive quirk list + * @clear_irq: clear IRQ * * @mdma_filter: filter MDMA modes * @udma_filter: filter UDMA modes @@ -544,6 +721,7 @@ struct ide_port_ops { void (*resetproc)(ide_drive_t *); void (*maskproc)(ide_drive_t *, int); void (*quirkproc)(ide_drive_t *); + void (*clear_irq)(ide_drive_t *); u8 (*mdma_filter)(ide_drive_t *); u8 (*udma_filter)(ide_drive_t *); @@ -606,8 +784,6 @@ typedef struct hwif_s { const struct ide_port_ops *port_ops; const struct ide_dma_ops *dma_ops; - void (*ide_dma_clear_irq)(ide_drive_t *drive); - /* dma physical region descriptor table (cpu view) */ unsigned int *dmatable_cpu; /* dma physical region descriptor table (dma view) */ @@ -621,6 +797,8 @@ typedef struct hwif_s { /* data phase of the active command (currently only valid for PIO/DMA) */ int data_phase; + struct ide_task_s task; /* current command */ + unsigned int nsect; unsigned int nleft; struct scatterlist *cursg; @@ -649,15 +827,15 @@ typedef struct hwif_s { void *hwif_data; /* extra hwif data */ - unsigned dma; - #ifdef CONFIG_BLK_DEV_IDEACPI struct ide_acpi_hwif_link *acpidata; #endif } ____cacheline_internodealigned_in_smp ide_hwif_t; +#define MAX_HOST_PORTS 4 + struct ide_host { - ide_hwif_t *ports[MAX_HWIFS]; + ide_hwif_t *ports[MAX_HOST_PORTS]; unsigned int n_ports; struct device *dev[2]; unsigned int (*init_chipset)(struct pci_dev *); @@ -739,6 +917,22 @@ static int set_##name(ide_drive_t *drive, int arg) \ return 0; \ } +#define ide_devset_get_flag(name, flag) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + return !!(drive->dev_flags & flag); \ +} + +#define ide_devset_set_flag(name, flag) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + if (arg) \ + drive->dev_flags |= flag; \ + else \ + drive->dev_flags &= ~flag; \ + return 0; \ +} + #define __IDE_DEVSET(_name, _flags, _get, _set) \ const struct ide_devset ide_devset_##_name = \ __DEVSET(_flags, _get, _set) @@ -764,71 +958,6 @@ ide_decl_devset(pio_mode); ide_decl_devset(unmaskirq); ide_decl_devset(using_dma); -/* ATAPI packet command flags */ -enum { - /* set when an error is considered normal - no retry (ide-tape) */ - PC_FLAG_ABORT = (1 << 0), - PC_FLAG_SUPPRESS_ERROR = (1 << 1), - PC_FLAG_WAIT_FOR_DSC = (1 << 2), - PC_FLAG_DMA_OK = (1 << 3), - PC_FLAG_DMA_IN_PROGRESS = (1 << 4), - PC_FLAG_DMA_ERROR = (1 << 5), - PC_FLAG_WRITING = (1 << 6), - /* command timed out */ - PC_FLAG_TIMEDOUT = (1 << 7), -}; - -/* - * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes. - * This is used for several packet commands (not for READ/WRITE commands). - */ -#define IDE_PC_BUFFER_SIZE 256 - -struct ide_atapi_pc { - /* actual packet bytes */ - u8 c[12]; - /* incremented on each retry */ - int retries; - int error; - - /* bytes to transfer */ - int req_xfer; - /* bytes actually transferred */ - int xferred; - - /* data buffer */ - u8 *buf; - /* current buffer position */ - u8 *cur_pos; - int buf_size; - /* missing/available data on the current buffer */ - int b_count; - - /* the corresponding request */ - struct request *rq; - - unsigned long flags; - - /* - * those are more or less driver-specific and some of them are subject - * to change/removal later. - */ - u8 pc_buf[IDE_PC_BUFFER_SIZE]; - - /* idetape only */ - struct idetape_bh *bh; - char *b_data; - - /* idescsi only for now */ - struct scatterlist *sg; - unsigned int sg_cnt; - - struct scsi_cmnd *scsi_cmd; - void (*done) (struct scsi_cmnd *); - - unsigned long timeout; -}; - #ifdef CONFIG_IDE_PROC_FS /* * /proc/ide interface @@ -839,6 +968,11 @@ ide_devset_get(_name, _field); \ ide_devset_set(_name, _field); \ IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) +#define ide_devset_rw_flag(_name, _field) \ +ide_devset_get_flag(_name, _field); \ +ide_devset_set_flag(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) + struct ide_proc_devset { const char *name; const struct ide_devset *setting; @@ -905,37 +1039,55 @@ static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t * #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0; #endif +enum { + /* enter/exit functions */ + IDE_DBG_FUNC = (1 << 0), + /* sense key/asc handling */ + IDE_DBG_SENSE = (1 << 1), + /* packet commands handling */ + IDE_DBG_PC = (1 << 2), + /* request handling */ + IDE_DBG_RQ = (1 << 3), + /* driver probing/setup */ + IDE_DBG_PROBE = (1 << 4), +}; + +/* DRV_NAME has to be defined in the driver before using the macro below */ +#define __ide_debug_log(lvl, fmt, args...) \ +{ \ + if (unlikely(drive->debug_mask & lvl)) \ + printk(KERN_INFO DRV_NAME ": " fmt, ## args); \ +} + /* - * Power Management step value (rq->pm->pm_step). + * Power Management state machine (rq->pm->pm_step). * - * The step value starts at 0 (ide_pm_state_start_suspend) for a - * suspend operation or 1000 (ide_pm_state_start_resume) for a - * resume operation. - * - * For each step, the core calls the subdriver start_power_step() first. + * For each step, the core calls ide_start_power_step() first. * This can return: * - ide_stopped : In this case, the core calls us back again unless * step have been set to ide_power_state_completed. * - ide_started : In this case, the channel is left busy until an * async event (interrupt) occurs. - * Typically, start_power_step() will issue a taskfile request with + * Typically, ide_start_power_step() will issue a taskfile request with * do_rw_taskfile(). * - * Upon reception of the interrupt, the core will call complete_power_step() + * Upon reception of the interrupt, the core will call ide_complete_power_step() * with the error code if any. This routine should update the step value * and return. It should not start a new request. The core will call - * start_power_step for the new step value, unless step have been set to - * ide_power_state_completed. - * - * Subdrivers are expected to define their own additional power - * steps from 1..999 for suspend and from 1001..1999 for resume, - * other values are reserved for future use. + * ide_start_power_step() for the new step value, unless step have been + * set to IDE_PM_COMPLETED. */ - enum { - ide_pm_state_completed = -1, - ide_pm_state_start_suspend = 0, - ide_pm_state_start_resume = 1000, + IDE_PM_START_SUSPEND, + IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND, + IDE_PM_STANDBY, + + IDE_PM_START_RESUME, + IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME, + IDE_PM_IDLE, + IDE_PM_RESTORE_DMA, + + IDE_PM_COMPLETED, }; /* @@ -946,7 +1098,6 @@ enum { */ struct ide_driver_s { const char *version; - u8 media; ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t); int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); @@ -1015,110 +1166,6 @@ extern void ide_do_drive_cmd(ide_drive_t *, struct request *); extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); -enum { - IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_FLAGGED = (1 << 2), - IDE_TFLAG_OUT_DATA = (1 << 3), - IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4), - IDE_TFLAG_OUT_HOB_NSECT = (1 << 5), - IDE_TFLAG_OUT_HOB_LBAL = (1 << 6), - IDE_TFLAG_OUT_HOB_LBAM = (1 << 7), - IDE_TFLAG_OUT_HOB_LBAH = (1 << 8), - IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | - IDE_TFLAG_OUT_HOB_NSECT | - IDE_TFLAG_OUT_HOB_LBAL | - IDE_TFLAG_OUT_HOB_LBAM | - IDE_TFLAG_OUT_HOB_LBAH, - IDE_TFLAG_OUT_FEATURE = (1 << 9), - IDE_TFLAG_OUT_NSECT = (1 << 10), - IDE_TFLAG_OUT_LBAL = (1 << 11), - IDE_TFLAG_OUT_LBAM = (1 << 12), - IDE_TFLAG_OUT_LBAH = (1 << 13), - IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_LBAH, - IDE_TFLAG_OUT_DEVICE = (1 << 14), - IDE_TFLAG_WRITE = (1 << 15), - IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16), - IDE_TFLAG_IN_DATA = (1 << 17), - IDE_TFLAG_CUSTOM_HANDLER = (1 << 18), - IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19), - IDE_TFLAG_IN_HOB_FEATURE = (1 << 20), - IDE_TFLAG_IN_HOB_NSECT = (1 << 21), - IDE_TFLAG_IN_HOB_LBAL = (1 << 22), - IDE_TFLAG_IN_HOB_LBAM = (1 << 23), - IDE_TFLAG_IN_HOB_LBAH = (1 << 24), - IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | - IDE_TFLAG_IN_HOB_LBAM | - IDE_TFLAG_IN_HOB_LBAH, - IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE | - IDE_TFLAG_IN_HOB_NSECT | - IDE_TFLAG_IN_HOB_LBA, - IDE_TFLAG_IN_FEATURE = (1 << 1), - IDE_TFLAG_IN_NSECT = (1 << 25), - IDE_TFLAG_IN_LBAL = (1 << 26), - IDE_TFLAG_IN_LBAM = (1 << 27), - IDE_TFLAG_IN_LBAH = (1 << 28), - IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | - IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_LBAH, - IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | - IDE_TFLAG_IN_LBA, - IDE_TFLAG_IN_DEVICE = (1 << 29), - IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | - IDE_TFLAG_IN_HOB, - IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | - IDE_TFLAG_IN_TF, - IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_IN_DEVICE, - /* force 16-bit I/O operations */ - IDE_TFLAG_IO_16BIT = (1 << 30), - /* ide_task_t was allocated using kmalloc() */ - IDE_TFLAG_DYN = (1 << 31), -}; - -struct ide_taskfile { - u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ - - u8 hob_feature; /* 1-5: additional data to support LBA48 */ - u8 hob_nsect; - u8 hob_lbal; - u8 hob_lbam; - u8 hob_lbah; - - u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ - - union { /*  7: */ - u8 error; /* read: error */ - u8 feature; /* write: feature */ - }; - - u8 nsect; /* 8: number of sectors */ - u8 lbal; /* 9: LBA low */ - u8 lbam; /* 10: LBA mid */ - u8 lbah; /* 11: LBA high */ - - u8 device; /* 12: device select */ - - union { /* 13: */ - u8 status; /*  read: status  */ - u8 command; /* write: command */ - }; -}; - -typedef struct ide_task_s { - union { - struct ide_taskfile tf; - u8 tf_array[14]; - }; - u32 tf_flags; - int data_phase; - struct request *rq; /* copy of request */ - void *special; /* valid_t generally */ -} ide_task_t; - void ide_tf_dump(const char *, struct ide_taskfile *); void ide_exec_command(ide_hwif_t *, u8); @@ -1163,24 +1210,22 @@ enum { REQ_IDETAPE_WRITE = (1 << 3), }; -void ide_queue_pc_head(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *, - struct request *); int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *); int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); +void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); +void ide_retry_pc(ide_drive_t *, struct gendisk *); + +static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc) +{ + return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); +} + +int ide_scsi_expiry(ide_drive_t *); -ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, - ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, - void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), - void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), - int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int, - int)); -ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, - ide_handler_t *, unsigned int, ide_expiry_t *); -ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *, - ide_handler_t *, unsigned int, ide_expiry_t *); +ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *); ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); @@ -1436,7 +1481,6 @@ void ide_undecoded_slave(ide_drive_t *); void ide_port_apply_params(ide_hwif_t *); -struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **); struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **); void ide_host_free(struct ide_host *); int ide_host_register(struct ide_host *, const struct ide_port_info *, @@ -1547,6 +1591,6 @@ static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive) { ide_drive_t *peer = &drive->hwif->drives[(drive->dn ^ 1) & 1]; - return peer->present ? peer : NULL; + return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL; } #endif /* _IDE_H */