X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fipmi_msgdefs.h;h=b56a158d587a50e0c9ab0c8712f308bf01ecda74;hb=2f3edc6936e3f6be3f1df1e89c141ae028fa605e;hp=4d04d8b58a0a55a13a59ef9055cdd5eac81e4d08;hpb=170926993a320cd7b53c388e6ffc759de4fac472;p=linux-2.6-omap-h63xx.git

diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index 4d04d8b58a0..b56a158d587 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -46,6 +46,8 @@
 #define IPMI_NETFN_APP_REQUEST			0x06
 #define IPMI_NETFN_APP_RESPONSE			0x07
 #define IPMI_GET_DEVICE_ID_CMD		0x01
+#define IPMI_COLD_RESET_CMD		0x02
+#define IPMI_WARM_RESET_CMD		0x03
 #define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
 #define IPMI_GET_DEVICE_GUID_CMD	0x08
 #define IPMI_GET_MSG_FLAGS_CMD		0x31
@@ -60,20 +62,27 @@
 #define IPMI_NETFN_STORAGE_RESPONSE		0x0b
 #define IPMI_ADD_SEL_ENTRY_CMD		0x44
 
+#define IPMI_NETFN_FIRMWARE_REQUEST		0x08
+#define IPMI_NETFN_FIRMWARE_RESPONSE		0x09
+
 /* The default slave address */
 #define IPMI_BMC_SLAVE_ADDR	0x20
 
 /* The BT interface on high-end HP systems supports up to 255 bytes in
  * one transfer.  Its "virtual" BMC supports some commands that are longer
  * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead.  It would be nice to base this on the "BT Capabilities"
- * but that's too hard to propagate to the rest of the driver. */
+ * some overhead; it's not worth the effort to dynamically size this based
+ * on the results of the "Get BT Capabilities" command. */
 #define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
 
 #define IPMI_CC_NO_ERROR		0x00
 #define IPMI_NODE_BUSY_ERR		0xc0
 #define IPMI_INVALID_COMMAND_ERR	0xc1
+#define IPMI_TIMEOUT_ERR		0xc3
 #define IPMI_ERR_MSG_TRUNCATED		0xc6
+#define IPMI_REQ_LEN_INVALID_ERR	0xc7
+#define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
+#define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
 #define IPMI_LOST_ARBITRATION_ERR	0x81
 #define IPMI_BUS_ERR			0x82
 #define IPMI_NAK_ON_WRITE_ERR		0x83